Contribution for the Life Cycle Oriented Evaluation of Costs and Resource Efficiency of Production Machines in Procurement

2014 ◽  
Vol 655 ◽  
pp. 9-14
Author(s):  
Vanessa Schmidt ◽  
Markus Graßl ◽  
Gunther Reinhart

Even though the share of the production machine’s environmental impact might be negligible compared to the product’s own use phase, the environmental impact at the factory site of is potentially significant. Thus, this article presents a contribution for the life cycle oriented evaluation of costs and resource efficiency applied in procurement of a production machine.

2021 ◽  
Vol 343 ◽  
pp. 07002
Author(s):  
Niculina Alexandra Grigore ◽  
Claudiu Vasile Kifor

Industry, especially the automotive industry is permanently changing and adapting to the external and internal factors. The appearance of the new types of vehicles – electric vehicles, is a big and important step not only regarding the evolution of the product, but also regarding the advantages of reducing environmental impact. It is promoted the idea that an electric vehicle generates less direct emissions in use phase compared with a conventional one. If we limit to this, we could say that we are dealing with an eco-friendly type of vehicle. The question is, can we extend this idea to the other stages of the life cycle? What about the sustainability of the industry? This article highlights the methods of environmental impact assessment used by researchers for electric vehicles in terms of life cycle and sustainability. The findings of this systematic review demonstrate that even if are a large number of articles addressing electric vehicles, only a small number of them evaluate the electric vehicle from life cycle and sustainability point of view.


2021 ◽  
Vol 13 (15) ◽  
pp. 8478
Author(s):  
Hanna Kröhnert ◽  
Matthias Stucki

The environmental impact of a plant-based shampoo produced and marketed in Zurich, Switzerland, was analyzed using the life cycle assessment method. Beside the identification of environmental hotspots and mitigation possibilities, the focus of the study was on the analysis and comparison of different refill offers. The results of the study show that one hair wash using the investigated shampoo is related to greenhouse gas emissions of 161 gCO2eq. For all investigated impact categories, the use phase represents the dominant life stage, except for land use, which is dominated by the production of the purely plant-based shampoo ingredients. The environmental impact related to the use phase is highly sensitive on the consumers’ showering habits, such as water consumption and water temperature, due to predominantly fossil-based heating in Zurich. On the producer’s side, a switch to renewable energy sources both for heating and electricity is identified as most effective measure to reduce the environmental impact of the manufacturing phase. As to the product end-of-life, the results suggest that emissions of the shampoo ingredients after wastewater treatment have a negligible impact on freshwater ecotoxicity. In this context, a need for further research is identified with respect to characterization factors and specific removal rates in wastewater treatment plants. From a life cycle perspective, packaging production and disposal have rather low contributions. Offering refill possibilities can reduce the packaging related contributions by several percentage points, however, higher mitigation potentials are found for use phase and manufacturing.


Author(s):  
Melissa Tensa ◽  
Vincenzo Ferrero ◽  
Donovan Ross ◽  
Bryony DuPont

The goal of this research is to characterize the effects of use patterns on the environmental sustainability of consumer products, and to enable decision making throughout design processes that encourages product sustainability. Life Cycle Assessments (LCA) are currently used to evaluate the environmental impact of a product, but there can be considerable uncertainty in these analyses, especially relating to the use phase of the product. To better understand this uncertainty, we conducted environmental impact assessments of 20 household products, and employed two uncertainty quantification approaches to accommodate variation in the use phase of these products. The results from each product were then compared to products with similar attributes to find generalizations. This knowledge was integrated into decision trees so designers can better understand the degree to which use-phase uncertainty can affect quantitative measures of environmental impact before performing LCAs. This work enables designers to make more informed decisions about the intended use and use lifetimes of consumer products, potentially leading to a reduced environmental impact of this life cycle phase.


2016 ◽  
Vol 5 (2) ◽  
pp. 229
Author(s):  
Zonghua Xu ◽  
Neelnayana Kalita Mim ◽  
Matthew Franchetti ◽  
Ashok Kumar

<p class="emsd-body">The objective of this study is to compare the energy efficiency, potential energy savings and the environmental impact among different lighting types-incandescent lamps, CFL (compact fluorescent light) lamps and LED (light-emitting diode) lamps in a manufacturing facility. Three different tools were applied: Energy Assessment Spreadsheet (EAS), Pollution Prevention (P2) tool and GaBi 6. EAS was used to calculate the energy savings, P2 tool was used for carbon footprint analysis, and GaBi was used for the life cycle assessment (LCA) in lightings’ use phase. The results indicated a saving of over $21,000 and a reduction of 151 MT CO<sub>2</sub>e (metric tons of CO<sub>2</sub> equivalents) greenhouse gases (GHGs) using CFL in comparison to incandescent lamps. Approximately, $24,000 could be saved and 170 MTCO<sub>2</sub>e of GHGs could be reduced by using LED lamps instead of incandescent lamps every year for the operation phase of the facility. The environmental impact categories identified from the LCA in lighting use phase indicated that using incandescent lamps for the facility was much more harmful for the environment than using CFL and LED lamps. Additionally, the environmental impact from the use of LED lamps for the facility was less than that of CFL lamps.</p>


2020 ◽  
pp. 161-165
Author(s):  
Bertram de Crom ◽  
Jasper Scholten ◽  
Janjoris van Diepen

To get more insight in the environmental performance of the Suiker Unie beet sugar, Blonk Consultants performed a comparative Life Cycle Assessment (LCA) study on beet sugar, cane sugar and glucose syrup. The system boundaries of the sugar life cycle are set from cradle to regional storage at the Dutch market. For this study 8 different scenarios were evaluated. The first scenario is the actual sugar production at Suiker Unie. Scenario 2 until 7 are different cane sugar scenarios (different countries of origin, surplus electricity production and pre-harvest burning of leaves are considered). Scenario 8 concerns the glucose syrup scenario. An important factor in the environmental impact of 1kg of sugar is the sugar yield per ha. Total sugar yield per ha differs from 9t/ha sugar for sugarcane to 15t/ha sugar for sugar beet (in 2017). Main conclusion is that the production of beet sugar at Suiker Unie has in general a lower impact on climate change, fine particulate matter, land use and water consumption, compared to cane sugar production (in Brazil and India) and glucose syrup. The impact of cane sugar production on climate change and water consumption is highly dependent on the country of origin, especially when land use change is taken into account. The environmental impact of sugar production is highly dependent on the co-production of bioenergy, both for beet and cane sugar.


Author(s):  
Cheila Almeida ◽  
Philippe Loubet ◽  
Tamíris Pacheco da Costa ◽  
Paula Quinteiro ◽  
Jara Laso ◽  
...  

2021 ◽  
Vol 13 (9) ◽  
pp. 5322
Author(s):  
Gabriel Zsembinszki ◽  
Noelia Llantoy ◽  
Valeria Palomba ◽  
Andrea Frazzica ◽  
Mattia Dallapiccola ◽  
...  

The buildings sector is one of the least sustainable activities in the world, accounting for around 40% of the total global energy demand. With the aim to reduce the environmental impact of this sector, the use of renewable energy sources coupled with energy storage systems in buildings has been investigated in recent years. Innovative solutions for cooling, heating, and domestic hot water in buildings can contribute to the buildings’ decarbonization by achieving a reduction of building electrical consumption needed to keep comfortable conditions. However, the environmental impact of a new system is not only related to its electrical consumption from the grid, but also to the environmental load produced in the manufacturing and disposal stages of system components. This study investigates the environmental impact of an innovative system proposed for residential buildings in Mediterranean climate through a life cycle assessment. The results show that, due to the complexity of the system, the manufacturing and disposal stages have a high environmental impact, which is not compensated by the reduction of the impact during the operational stage. A parametric study was also performed to investigate the effect of the design of the storage system on the overall system impact.


Author(s):  
Yuma Sasaki ◽  
Takahiro Orikasa ◽  
Nobutaka Nakamura ◽  
Kiyotada Hayashi ◽  
Yoshihito Yasaka ◽  
...  

Energies ◽  
2021 ◽  
Vol 14 (14) ◽  
pp. 4146
Author(s):  
Agnieszka Jachura ◽  
Robert Sekret

This paper presents an environmental impact assessment of the entire cycle of existence of the tube-vacuum solar collector prototype. The innovativeness of the solution involved using a phase change material as a heat-storing material, which was placed inside the collector’s tubes-vacuum. The PCM used in this study was paraffin. The system boundaries contained three phases: production, operation (use phase), and disposal. An ecological life cycle assessment was carried out using the SimaPro software. To compare the environmental impact of heat storage, the amount of heat generated for 15 years, starting from the beginning of a solar installation for preparing domestic hot water for a single-family residential building, was considered the functional unit. Assuming comparable production methods for individual elements of the ETC and waste management scenarios, the reduction in harmful effects on the environment by introducing a PCM that stores heat inside the ETC ranges from 17 to 24%. The performed analyses have also shown that the method itself of manufacturing the materials used for the construction of the solar collector and the choice of the scenario of the disposal of waste during decommissioning the solar collector all play an important role in its environmental assessment. With an increase in the application of the advanced technologies of materials manufacturing and an increase in the amount of waste subjected to recycling, the degree of the solar collector’s environmental impact decreased by 82% compared to its standard manufacture and disposal.


2018 ◽  
Vol 10 (5) ◽  
pp. 1451 ◽  
Author(s):  
Mario Giraldi-Díaz ◽  
Lorena De Medina-Salas ◽  
Eduardo Castillo-González ◽  
Max De la Cruz-Benavides

Sign in / Sign up

Export Citation Format

Share Document