Experimental Study on Pressure Fluctuations in the Boundary Layer of an Axisymmetric Body

2011 ◽  
Vol 66-68 ◽  
pp. 1488-1493
Author(s):  
Hong Xiao ◽  
Chao Gao ◽  
Zhen Kun Ma

The characteristics of the fluctuating pressure in the boundary layer of an axisymmetric body have been investigated experimentally using dynamic pressure measurements and Schlieren photograghs. Data were acquired at subsonic and super-sonic Mach numbers. The angles of attack ranged from 0° to 5°. Pressure signals were measured simultaneously in several positions along the model and were analyzed both in the time and frequency domains. The Mach number shows the relevant influence on . Furthermore, the pressure fluctuations’ level decreases with the increasing of Mach number except M=1.15. And it is shown that, the location along the axis of the model and the angles of attack have small effect on pressure fluctuations.

2011 ◽  
Vol 66-68 ◽  
pp. 1483-1487
Author(s):  
Hong Xiao ◽  
Chao Gao ◽  
Zhen Kun Ma

The characteristics of the fluctuating pressure for the 15° expansion corner of an axisymmetric body have been investigated experimentally using dynamic pressure measurements and Schlieren photograghs. Data were acquired over a Mach number ranging from 0.8 to 0.92. The angles of attack ranged from 0° to 5°. Pressure signals were measured simultaneously in several positions along the axis of model and were analyzed both in the time and frequency domains. The results indicate that large fluctuating pressure loads, resulting from the shock/boundary layer interaction exist at the transonic flow condition, because of the shock/boundary layer interaction. The maximal pressure fluctuation occurs after the expansion corner at Mach number 0.86. With the Mach number increasing, the position of the normal shock moves downstream. In the shock/boundary layer interaction region, the fluctuating pressure changes significantly with different angles of attack. Moreover, this interaction has a main effect of enhancing the power spectral density in low-frequency range (f≤5KHz).


2016 ◽  
Vol 33 (2) ◽  
Author(s):  
K. Kirubhakaran ◽  
K. M. Parammasivam

AbstractAn experimental study of the recirculation zone and mixing lengths for bluff-body stabilized flames is conducted at non-reactive conditions. This paper reports the prediction of recirculation zone length from dynamic pressure measurements. The auxiliary turbulence created from the wall of the combustor is also studied and maintained to levels as low as 5%. The experiments are conducted by varying the velocity from 5 m/s to 8 m/s for V-Gutters bluff-body with induced angles of 60, 90 and 120


2020 ◽  
Vol 87 (10) ◽  
pp. 630-636
Author(s):  
Oliver Slanina ◽  
Susanne Quabis ◽  
Robert Wynands

AbstractTo ensure the safety of users like hunters and sports shooters, the dynamic pressure inside an ammunition cartridge must not exceed a maximum value. We have investigated the reproducibility of the dynamic measurement of the gas pressure inside civilian ammunition cartridges during firing, when following the rules formulated by the Permanent International Commission for the Proof of Small Arms (C. I. P.). We find an in-house spread of 0.8 % between maximum and minimum pressure for runs with the same barrel and of 1.8 % among a set of three barrels. This sets a baseline for the expected agreement in measurement comparisons between different laboratories. Furthermore, a difference of more than 3 % is found in a preliminary study of the influence of ammunition storage conditions.


2000 ◽  
Author(s):  
Wojtek J. Bock ◽  
Magdalena S. Nawrocka ◽  
Waclaw Urbanczyk

2021 ◽  
Author(s):  
V. L. Kocharin ◽  
A. A. Yatskikh ◽  
D. S. Prishchepova ◽  
A. V. Panina ◽  
Yu. G. Yermolaev ◽  
...  

Author(s):  
Debasish Biswas ◽  
Tomohiko Jimbo

Unsteady transonic flows in diffuser have become increasingly important, because of its application in new propulsion systems. In the development of supersonic inlet, air breathing propulsion systems of aircraft and missiles, detail investigations of these types of flow behavior are very much essential. In these propulsion systems, naturally present self-sustaining oscillations, believed to be equivalent to dynamically distorted flow fields in operational inlets, were found under all operating conditions. The investigations are also relevant to pressure oscillations known to occur in ramjet inlets in response to combustor instabilities. The unsteady aspects of these flows are important because the appearance of undesirable fluctuations generally impose limitation on the inlet performance. Test results of ramjet propulsion systems have shown undesirable high amplitude pressure fluctuations caused by the combustion instability. The pressure fluctuations originated from the combustor extend forward into the inlet and interact with the diffuser flow-field. Depending on different parameters such as the diffuser geometry, the inlet/exit pressure ratio, the flow Mach number, different complicated phenomena may occur. The most important characteristics are the occurrence of shock induced separation, the length of separation region downstream of the shock location, and the oscillation of shock location as well as the oscillation of the whole downstream flow. Sajben experimentally investigated in detail the time mean and unsteady flow characteristics of supercritical transonic diffuser as a function of flow Mach number upstream the shock location and diffuser length. The flows exhibited features similar to those in supersonic inlets of air-breathing propulsion systems of aircraft. A High-order LES turbulence model developed by the author is assessed with experimental data of Sajben on the self-excited shock oscillation phenomena. The whole diffuser model configuration including the suction slot located at certain axial location around the bottom and side walls to remove boundary layer, are included in the present computation model. The time-mean and unsteady flow characteristics in this transonic diffuser as a function of flow Mach number and diffuser length are investigated in detail. The results of study showed that in the case of shock-induced separation flow, the length and thickness of the reverse flow region of the separation-bubble change, as the shock passed through its cycle. The instabilities in the separated layer, the shock /boundary layer interaction, the dynamics of entrainment in the separation bubble, and the interaction of the travelling pressure wave with the pressure fluctuation region caused by the step-like structure of the suction slot play very important role in the shock-oscillation frequency.


1999 ◽  
Author(s):  
Magdalena S. Nawrocka ◽  
Wojtek J. Bock ◽  
Waclaw Urbanczyk ◽  
Jan Wojcik

Sign in / Sign up

Export Citation Format

Share Document