Identification of Coupled Mode Shapes Based on Complex Mode Indicator Function

2015 ◽  
Vol 732 ◽  
pp. 183-186
Author(s):  
Róbert Huňady ◽  
Martin Hagara ◽  
Martin Schrötter
Keyword(s):  
Modal Analysis ◽  
Correlation Method ◽  
Indicator Function ◽  
Experimental Modal Analysis ◽  
Image Correlation ◽  
Mode Shapes ◽  
Complex Mode ◽  
Coupled Mode ◽  
Value Decomposition ◽  
Function Matrix

Paper deals with the identification of coupled mode shapes by experimental modal analysis. Main attention is focused on the using of Complex Mode Indicator Function that is based on singular value decomposition of frequency response function matrix and allows to separate coupled and also closed modes. In the paper there is described experimental modal analysis at which digital image correlation method is used to measure responses of a circular plate. The measurement was evaluated in program Modan 3D that is being developed by the authors.

The Use of Modan 3D in Experimental Modal Analysis

2013 ◽  
Vol 486 ◽  
pp. 36-41 ◽  
Author(s):  
Róbert Huňady ◽  
František Trebuňa ◽  
Martin Hagara ◽  
Martin Schrötter
Keyword(s):  
Modal Analysis ◽  
Vibration Analysis ◽  
High Speed ◽  
Mechanical Vibration ◽  
Steel Sample ◽  
Experimental Modal Analysis ◽  
Image Correlation ◽  
Optical Methods ◽  
Mode Shapes ◽  
Vibration Modes

Experimental modal analysis is a relatively young part of dynamics, which deals with the vibration modes identification of machines or their parts. Its development has started since the beginning of the eighties, when the computers hardware equipment has improved and the fast Fourier transform (FFT) could be used for the results determination. Nowadays it provides an uncountable set of vibration analysis possibilities starting with conventional contact transducers of acceleration and ending with modern noncontact optical methods. In this contribution we mention the use of high-speed digital image correlation by experimental determination of mode shapes and modal frequencies. The aim of our work is to create a program application called Modan 3D enabling the performing of experimental modal analysis and operational modal analysis. In this paper the experimental modal analysis of a thin steel sample performed with Q-450 Dantec Dynamics is described. In Modan 3D the experiment data were processed and the vibration modes were determined. The reached results were verified by PULSE modulus specialized for mechanical vibration analysis.

scholarly journals Influence of Different Random Pattern Creation Forms on the Results of Experimental Modal Analysis Performed by High-Speed Digital Image Correlation

2014 ◽  
Vol 8 (1) ◽  
pp. 22-26 ◽  
Author(s):  
Martin Hagara ◽  
Martin Schrötter ◽  
Pavol Lengvarský
Keyword(s):  
Digital Image Correlation ◽  
Modal Analysis ◽  
Digital Image ◽  
High Speed ◽  
Sample Surface ◽  
Experimental Modal Analysis ◽  
Parameters Estimation ◽  
Image Correlation ◽  
Mode Shapes ◽  
Random Pattern

Abstract In this contribution an influence of random contrast patterns creation on the quality of the obtained results of experimental modal analysis performed by high-speed digital image correlation is described. Three common forms of random pattern creation were investigated. While the first form was presented by the black speckles printed on white matt vinyl foil and bonded on the sample surface, in the second and the third case, respectively, the black speckles were sprayed on white sprayed sample surface or on paint white one. For the purposes of modal parameters estimation in the form of natural frequencies, mode shapes and damping ratios the program called Modan3D, developed in the authors department, was used. The results obtained by Modan3D were compared with the results achieved by system Pulse specialized for vibration analysis.

Effect of Bass Bar Tension on Modal Parameters of a Violin's Top Plate

2015 ◽  
Vol 39 (1) ◽  
pp. 145-149 ◽  
Author(s):  
Ewa B. Skrodzka ◽  
Bogumił B.J. Linde ◽  
Antoni Krupa
Keyword(s):  
Modal Analysis ◽  
Experimental Modal Analysis ◽  
Mode Shapes ◽  
Modal Parameters ◽  
Normal Value ◽  
Modal Damping

Abstract Experimental modal analysis of a violin with three different tensions of a bass bar has been performed. The bass bar tension is the only intentionally introduced modification of the instrument. The aim of the study was to find differences and similarities between top plate modal parameters determined by a bass bar perfectly fitting the shape of the top plate, the bass bar with a tension usually applied by luthiers (normal), and the tension higher than the normal value. In the modal analysis four signature modes are taken into account. Bass bar tension does not change the sequence of mode shapes. Changes in modal damping are insignificant. An increase in bass bar tension causes an increase in modal frequencies A0 and B(1+) and does not change the frequencies of modes CBR and B(1-).

scholarly journals Crack Identification and Localization In Structural Beams Using Numerical and Experimental Modal Analysis- A Review

2020 ◽  
pp. 62-68
Keyword(s):  
Modal Analysis ◽  
Natural Frequency ◽  
Structural Damage ◽  
Experimental Modal Analysis ◽  
Mode Shapes ◽  
Crack Identification ◽  
Engineering Structures ◽  
Aircraft Wings ◽  
Crack Location ◽  
Damaged Beams

This article presents a critical review of recent research done on crack identification and localization in structural beams using numerical and experimental modal analysis. Crack identification and localization in beams are very crucial in various engineering applications such as ship propeller shafts, aircraft wings, gantry cranes, and Turbo machinery blades. It is necessary to identify the damage in time; otherwise, there may be serious consequences like a catastrophic failure of the engineering structures. Experimental modal analysis is used to study the vibration characteristics of structures like natural frequency, damping and mode shapes. The modal parameters like natural frequency and mode shapes of undamaged and damaged beams are different. Based on this reason, structural damage can be detected, especially in beams. From the review of various research papers, it is identified that a lot of the research done on beams with open transverse crack. Crack location is identified by tracking variation in natural frequencies of a healthy and cracked beam

Effect of Weight on the Experimental Modal Analysis of Slender Cantilever Beams

2009 ◽  
Author(s):  
Lawrence Virgin ◽  
David Holland
Keyword(s):  
Modal Analysis ◽  
Natural Frequencies ◽  
Vertical Direction ◽  
Experimental Modal Analysis ◽  
Mode Shapes ◽  
Lateral Stiffness ◽  
Axial Loads ◽  
Horizontal Orientation ◽  
Beam System ◽  
Tensile Forces

It is relatively well known that axial loads tend to influence lateral stiffness and hence natural frequencies of slender structural components. Tensile forces tend to increase the lateral stiffness and compressive forces tend to reduce lateral stiffness, bringing with it the possibility of buckling. In many practical situations this is a negligible effect. But for very slender structures it can be important, including the effect of self-weight. This paper will focus attention on a form of double cantilever beam system, i.e., two cantilevers sharing a common hub. A differential axial load can be applied to this system via orientation in a gravitational field. We shall neglect the effect of gravity when the beams are in their horizontal orientation from a limited theoretical standpoint. It is of course present in the experiments but the cantilevers are much stiffer in one direction than the other, and the beams are clamped with their stiffer resistance in the vertical direction. The focus of the current paper is on the natural frequencies and mode shapes of a two-beam system from an experimental modal analysis perspective.

scholarly journals Rayleigh Damping Coefficients of Laminated Rubber Bearing

2019 ◽  
Vol 8 (4) ◽  
pp. 12294-12300
Keyword(s):  
Finite Element ◽  
Modal Analysis ◽  
Natural Frequencies ◽  
Experimental Modal Analysis ◽  
Mode Shapes ◽  
Ground Structure ◽  
Damping Coefficients ◽  
Rubber Bearing ◽  
Stability And Instability ◽  
Laminated Rubber Bearing

In isolating the ground structure and the above ground structure from seismic loads, a significant device called laminated rubber bearing is usually found in structure. The complexity of the material which is made up from a combination of rubber and steel shim plates in alternate layer, has made it difficult to measure damping value. Damping is a dissipation of energy or energy losses in the vibration of the structure. Measuring the accurate amount of damping is fundamental as damping plays a crucial role in fixing the borderline between stability and instability in structural systems. Therefore, to determine the damping value including dynamic properties in any materials, modal analysis can be used. Hence, the main objective of this research is to determine the Rayleigh’s damping coefficients α and β and to evaluate the performance of the laminated rubber bearing using finite element and experimental modal analysis. Finding shows that, the finite element modal analysis with the addition of Rayleigh’s damping coefficients α and β, shows a good agreement with the experimental modal analysis in term of natural frequencies and mode shapes. Findings show that, the values of natural frequencies reduced when precise Rayleigh’s damping coefficient added in the finite element modal analysis. It can be concluded that both finite element and experimental modal analysis method can be used to estimate the accurate values of damping ratio and to determine the Rayleigh’s damping coefficients α and β as well.

scholarly journals Influence of Crack on Modal Parameters of Cantilever Beam Using Experimental Modal Analysis

2018 ◽  
Vol 1 (1) ◽  
pp. 16-23 ◽  
Author(s):  
Siva Sankara Babu Chinka ◽  
Balakrishna Adavi ◽  
Srinivasa Rao Putti
Keyword(s):  
Numerical Analysis ◽  
Modal Analysis ◽  
Natural Frequency ◽  
Cantilever Beam ◽  
Damping Ratio ◽  
Crack Depth ◽  
Experimental Modal Analysis ◽  
Mode Shapes ◽  
Modal Parameters ◽  
Crack Location

In this paper, the dynamic behavior of a cantilever beam without and with crack is observed. An elastic Aluminum cantilever beams having surface crack at various crack positions are considered to analyze dynamically. Crack depth, crack length and crack location are the foremost parameters for describing the health condition of beam in terms of modal parameters such as natural frequency, mode shape and damping ratio. It is crucial to study the influence of crack depth and crack location on modal parameters of the beam for the decent performance and its safety. Crack or damage of structure causes a reduction in stiffness, an intrinsic reduction in resonant frequencies, variation of damping ratios and mode shapes. The broad examination of cantilever beam without crack and with crack has been done using Numerical analysis (Ansys18.0) and experimental modal analysis. To observe the exact higher modes of beam, discretize the beam into small elements. An experimental set up was established for cantilever beam having crack and it was excited by an impact hammer and finally the response was obtained using PCB accelerometer with the help sound and vibration toolkit of NI Lab-view. After obtaining the Frequency response functions (FRFs), the natural frequencies of beam are estimated using peak search method. The effectiveness of experimental modal analysis in terms of natural frequency is validated with numerical analysis results. This paper contains the study of free vibration analysis under the influence of crack at different points along the length of the beam.

INVESTIGATION OF DYNAMIC PROPERTIES OF ELASTOMERIC BEARING COMPONENTS VIA MODAL ANALYSIS

2015 ◽  
Vol 76 (8) ◽  
Author(s):  
A. I. Yusuf ◽  
M. A. Norliyati ◽  
M. A. Yunus ◽  
M. N. Abdul Rani
Keyword(s):  
Modal Analysis ◽  
Dynamic Behavior ◽  
Natural Frequencies ◽  
Dynamic Properties ◽  
Experimental Modal Analysis ◽  
Mode Shapes ◽  
Seismic Loads ◽  
Ground Structure ◽  
Elastomeric Bearing ◽  
Earthquake Load

Elastomeric bearing is a significant device in structures such as in bridges and buildings. It is used to isolate the ground structure (substructure) and the above ground structure (superstructure) from seismic loads such as earthquake load. Understanding the dynamic behavior of the elastomeric bearing in terms of natural frequencies, mode shapes and damping are increasingly important especially in improving the design and the failure limit of the elastomeric bearing. Modal analysis is one of the methods used to determine the dynamic properties of any materials. Hence, the main objective of this research is to determine the dynamic properties of elastomeric bearing components in terms of natural frequencies, mode shapes, and damping via numerical and experimental modal analysis. This method had been successfully performed in investigating the dynamic behavior of rubber and steel shim plate.

Sign in / Sign up

Export Citation Format

Share Document