A Novel Conceptual Approach for Predicting the Mechanical Properties of Recycled Aggregate Concrete

2016 ◽  
Vol 847 ◽  
pp. 156-165
Author(s):  
Marco Pepe ◽  
Eduardus Koenders ◽  
Romildo Dias Toledo Filho ◽  
Enzo Martinelli
Keyword(s):  
Mechanical Properties ◽  
Recycled Concrete ◽  
Recycled Aggregate Concrete ◽  
Construction And Demolition Waste ◽  
Recycled Aggregate ◽  
Recycled Aggregates ◽  
Conceptual Approach ◽  
Demolition Waste ◽  
Predictive Capacity ◽  
Moisture Condition

The construction sector is more and more committed to reduce its environmental impacts. One of the key actions undertaken in the last decade deals with the ability of turning construction and demolition waste into new raw materials. For instance, the use of recycled aggregates for producing new concrete was one of the most investigated. Thus, in the last decade, plenty of researches were involved in project on characterising the mechanical behaviour of concrete made with recycled aggregates. However, these projects were mainly experimental in nature and generally led to merely empirical formulations. Conversely, this paper is intended at providing a contribution for predicting the mechanical properties of Recycled Aggregates Concrete (RAC). Particularly, it aims at quantifying the effect of replacing ordinary aggregates with Recycled Concrete Aggregates (RCA) on the resulting compressive strength of RAC. To this end, a conceptual model considering both the relevant physical properties of regular and recycled aggregates, including the attached mortar content, and the hydration reactions of Portland cement paste is proposed. The actual predictive capacity of the proposed model is assessed through an experimental validation against experimental tests carried out on several concrete batches produced with various values for the different keys parameters, such as the nominal water-to-cement ratio, the aggregates replacement ratio and the initial moisture condition of aggregates. Both the experimental data and the theoretical formulations proposed in this paper stem out from the inter-university collaboration developed as part of the EU funded EnCoRe Project (www.encore-fp7.unisa.it).

scholarly journals Influence of Wetting and Drying Cycles on Physical and Mechanical Behavior of Recycled Aggregate Concrete

Materials ◽  
2020 ◽  
Vol 13 (24) ◽  
pp. 5675
Author(s):  
Caroline S. Rangel ◽  
Mayara Amario ◽  
Marco Pepe ◽  
Enzo Martinelli ◽  
Romildo D. Toledo Filho
Keyword(s):  
Recycled Concrete ◽  
Recycled Aggregate Concrete ◽  
Construction And Demolition Waste ◽  
Recycled Aggregate ◽  
Recycled Aggregates ◽  
Demolition Waste ◽  
Wetting And Drying ◽  
Aggregate Concrete ◽  
Wetting And Drying Cycles ◽  
The Impact

Recently, concerns have been rising about the impact of increasing the depletion of natural resources and the relevant generation of construction and demolition waste, on the environment and economy. Therefore, several efforts have been made to promote sustainable efficiency in the construction industry and the use of recycled aggregates derived from concrete debris for new concrete mixtures (leading to so-called recycled aggregate concrete, RAC) is one of the most promising solutions. Unfortunately, there are still gaps in knowledge regarding the durability performances of RAC. In this study, we investigate durability of structural RAC subjected to wet-dry cycles. We analyze the results of an experimental campaign aimed at evaluating the degradation process induced by wetting and drying cycles on the key physical and mechanical properties of normal- and high-strength concrete, produced with coarse recycled concrete aggregates (RCAs) of different sizes and origins. On the basis of the results we propose a degradation law for wetting and drying cycles, which explicitly makes a possible correlation between the initial concrete porosity, directly related to the specific properties of the RCAs and the resulting level of damage obtained in RAC samples.

scholarly journals Mechanical Strength Study on C&D Aggregates Replaced Concrete

2021 ◽  
Keyword(s):  
Compressive Strength ◽  
Recycled Concrete ◽  
Recycled Aggregate Concrete ◽  
Construction And Demolition Waste ◽  
Recycled Aggregate ◽  
Recycled Aggregates ◽  
Steam Curing ◽  
Demolition Waste ◽  
Large Size ◽  
New Treatments

Abstract. Recycled concrete was produced to overcome the problem of disposal of construction and demolition waste and lack of availability of natural materials. To improve the characteristics of recycled concrete, new treatments and suggestions were given by the researchers. This paper investigates the compressive strength of recycled aggregate concrete having the replacement of 0, 30, 40, 50 & 60% recycled coarse aggregates. The compressive strength of recycled concrete in water curing is compared with steam curing. The compressive strength of concrete is not much affected because of the use of large size recycled aggregates. The use of saturated dried surface large size recycled aggregates improves the strength of concrete.

scholarly journals Discrete Element Simulation Analysis of Biaxial Mechanical Properties of Concrete with Large-Size Recycled Aggregate

2021 ◽  
Vol 13 (13) ◽  
pp. 7498
Author(s):  
Tan Li ◽  
Jianzhuang Xiao
Keyword(s):  
Mechanical Properties ◽  
Stress State ◽  
Strain Curve ◽  
Confining Pressure ◽  
Recycled Concrete ◽  
Recycled Aggregate Concrete ◽  
Recycled Aggregate ◽  
Recycled Aggregates ◽  
Aggregate Model ◽  
Large Size

Concrete made with large-size recycled aggregates is a new kind of recycled concrete, where the size of the recycled aggregate used is 25–80 mm, which is generally three times that of conventional aggregate. Thus, its composition and mechanical properties are different from that of conventional recycled concrete and can be applied in large-volume structures. In this study, recycled aggregate generated in two stages with randomly distributed gravels and mortar was used to replace the conventional recycled aggregate model, to observe the internal stress state and cracking of the large-size recycled aggregate. This paper also investigated the mechanical properties, such as the compressive strength, crack morphology, and stress–strain curve, of concrete with large-size recycled aggregates under different confining pressures and recycled aggregate incorporation ratios. Through this research, it was found that when compared with conventional concrete, under the confining pressure, the strength of large-size recycled aggregate concrete did not decrease significantly at the same stress state, moreover, the stiffness was increased. Confining pressure has a significant influence on the strength of large-size recycled aggregate cocrete.

scholarly journals Effects of Recycled Aggregate Resin (RAR) in Concrete Material

2020 ◽  
Vol 11 (2) ◽  
Author(s):  
Sharifah Salwa Mohd Zuki ◽  
◽  
Shahiron Shahidan ◽  
Shivaraj Subramaniam ◽  
◽  
...  
Keyword(s):  
Epoxy Resin ◽  
Recycled Aggregate Concrete ◽  
Construction And Demolition Waste ◽  
Recycled Aggregate ◽  
Engineering Properties ◽  
Recycled Aggregates ◽  
Hardened Concrete ◽  
Demolition Waste ◽  
Split Tensile Strength ◽  
Close Proximity

This paper discussed the recycled aggregates produced from construction and demolition waste and their utilization in concrete construction. Along with a brief overview of the engineering properties of recycled aggregates, the paper also summarizes the effect and use of recycled aggregates on the properties of fresh and hardened concrete. The recycled aggregates were treated with epoxy resin to reduce the water absorptions with different percentages of resin such as 0%, 25%, 50%, 75%, and 100%. Epoxy resin is widely used in recent years owing to the enhancing of mechanical and durability of the concrete. This research also showed, recycled aggregate concrete are close proximity to normal concrete in terms of split tensile strength, compression strength and wet density. The low usage of resin was obtained good strength concrete compared to high percentage contained treated aggregates due to low bonding between material.

scholarly journals Studies on Hemp and Recycled Aggregate Concrete

2020 ◽  
Vol 14 (1) ◽  
Author(s):  
Samer Ghosn ◽  
Nour Cherkawi ◽  
Bilal Hamad
Keyword(s):  
Mechanical Properties ◽  
Fiber Length ◽  
Plain Concrete ◽  
Recycled Concrete ◽  
Recycled Aggregate Concrete ◽  
Recycled Aggregate ◽  
Recycled Aggregates ◽  
Silane Treatment ◽  
Hemp Fiber ◽  
Fiber Treatment

Abstract This paper reports on the first phase of a multi-phase research program conducted at the American University of Beirut (AUB) on “Hemp and Recycled Aggregates Concrete” (HRAC). HRAC is a new sustainable concrete material where hemp fibers are incorporated in the mix, the coarse aggregate content is reduced by 20% of the concrete volume, and 50% of the natural coarse aggregates (NCA) are replaced by recycled concrete aggregates (RCA), thus saving on natural resources and addressing the problem of waste material disposal. The effect of the new material on concrete consistency and hardened mechanical properties was studied. Also, few durability tests were conducted. Variables included percentage replacement of NCA by RCA (0 or 50%), maximum size aggregate (10 or 20 mm), hemp fiber length (20 or 30 mm), and hemp fiber treatment (alkali or silane or acetyl). Fiber characterization tests were conducted including morphology, crystallinity, and thermal analysis. The tests indicated that alkali and acetyl fiber treatments were better than the silane treatment in removing impurities on the fiber surface. Also, alkali and acetyl treatments have increased the crystallinity of the fibers while silane treatment decreased it. Results of mechanical properties tests showed that while HRAC has considerable lower compressive strength and modulus of elasticity than plain concrete, the flexural strength and splitting tensile strength are not significantly affected. The flexural stress–strain behavior of HRAC is ductile as compared to the brittle behavior of the plain concrete beams indicating positive impact on toughness and energy dissipation. The durability tests indicated that whereas HRAC mixes have higher absorption than plain concrete, they have better thermal properties and their resistance to freeze–thaw cycles is comparable to plain concrete. All test results were not significantly affected by fiber length or fiber treatment.

scholarly journals Evaluation of the physical-mechanical properties of cement-lime based masonry mortars produced with mixed recycled aggregates

2020 ◽  
Vol 70 (337) ◽  
pp. 210 ◽  
Author(s):  
R. L.S. Ferreira ◽  
M. A.S. Anjos ◽  
E. F. Ledesma ◽  
J. E.S. Pereira ◽  
A. K.C. Nóbrega
Keyword(s):  
Mechanical Properties ◽  
Construction And Demolition Waste ◽  
Recycled Aggregate ◽  
Recycled Aggregates ◽  
Demolition Waste ◽  
Long Run ◽  
Lime Mortars ◽  
Binder Ratio ◽  
Mechanical Strengths ◽  
One Way Anova

This study investigated the physical-mechanical effects of cement-lime mortars containing recycled aggregate of construction and demolition waste (CDW). The natural aggregate (NA) was replaced by volume at 25%, 50%, 75% and 100% by mixed recycled aggregate (MRA) obtained from the CDW crushing. Five types of mortars were prepared with a volumetric ratio of 1:1:6 (cement, lime and aggregate) and water/binder ratio based on the fixed consistency of 260 mm. The effects of MRA on fresh and hardened mortars’ properties were analyzed. The results were analyzed using a one-way ANOVA. MRA incorporation improved most of the physical-mechanical properties of mortars tested, except for hardened bulk density, water absorption and porosity. In the long-run, mechanical strengths significantly increased in all compositions, especially those with higher percentages of MRA. The results obtained showed that the use of MRA in masonry mortars is an alternative to reduce the generation of waste and consumption of natural resources.

scholarly journals Preliminary Analysis of the Use of Construction Waste to Replace Conventional Aggregates in Concrete

Buildings ◽  
2021 ◽  
Vol 11 (3) ◽  
pp. 81
Author(s):  
Fernando A. N. Silva ◽  
João M. P. Q. Delgado ◽  
António C. Azevedo ◽  
António G. B. Lima ◽  
Castorina S. Vieira
Keyword(s):  
Compressive Strength ◽  
Coarse Aggregate ◽  
Recycled Aggregate Concrete ◽  
Construction And Demolition Waste ◽  
Recycled Aggregate ◽  
Recycled Aggregates ◽  
Fine Aggregate ◽  
Demolition Waste ◽  
Fine Aggregates ◽  
Mechanical Strengths

This work aims to study the influence of using construction and demolition waste in the replacement of coarse and fine aggregate to produce recycled aggregate concrete (RAC). A moderate compressive strength concrete made with usual fine and coarse aggregate was used as a benchmark material. Compressive and split tensile tests were performed using 120 cylindrical concrete specimens with 150 mm diameter and 300 mm length. Four-point flexural tests in reinforced beams made with conventional concrete and RAC were performed. The results obtained showed that the use of recycled fine aggregates, in both percentages of substitution investigated—50% and 100%— did not generate any deleterious influence on the values of compressive strength and split tensile strength of the RACs produced. Tin fact, the mechanical strengths of RACs produced with recycled fine aggregate were equal or higher than those from the reference concrete. The same behavior was not observed, however, when the recycled coarse aggregate was used. For this case, decreases in concrete mechanical strengths were observed, especially in compressive strength, with values around 35% lower when compared to the reference concrete. Tensile mechanical tests results confirmed the excellent behavior of all RACs made with replacement of usual fine aggregates by recycled. Bending tests performed in reinforced RAC beams had as objective to evaluate the deformation profile of the beams. The obtained results showed that RAC beams with full replacement of usual fine aggregate by the recycled aggregates have presented little changes in the global behavior, an aspect that encourages its use.

scholarly journals Development of Concrete Incorporating Recycled Aggregates, Hydrated Lime and Natural Volcanic Pozzolan

2021 ◽  
Vol 6 (11) ◽  
pp. 155
Author(s):  
Natividad Garcia-Troncoso ◽  
Bowen Xu ◽  
Wilhenn Probst-Pesantez
Keyword(s):  
Compressive Strength ◽  
Recycled Concrete ◽  
Construction And Demolition Waste ◽  
Recycled Aggregate ◽  
Recycled Aggregates ◽  
Partial Replacement ◽  
Demolition Waste ◽  
Crushed Concrete ◽  
Natural Pozzolana ◽  
Concrete Materials

Recycling of construction and demolition waste is a central point of discussion throughout the world. The application of recycled concrete as partial replacement of mineral aggregates in concrete mixes is one of the alternatives in the reduction of pollution and savings in carbon emissions. The combined influence of the recycled crushed concrete, lime, and natural pozzolana on the mechanical and sustainable properties of concrete materials is firstly proposed in this study. In this research, unconventional construction materials are employed to produce concrete: the recycled crushed concrete is used as coarse aggregate, while lime and natural pozzolana are used as a partial replacement for cement. Substitutions of 10%, 20%, 50% of gravel are made with recycled aggregates, and 2%, 5%, 10% of cement with lime and natural pozzolan. Tests on the fresh and hardened properties, destructive (compressive strength) and non-destructive tests (sclerometer rebound and ultrasound) of mixtures are carried out. It is shown that the use of recycled materials can provide an increase in compressive strength of up to 34% with respect to conventional concrete. Life cycle cost and sustainability assessments indicate that concrete materials incorporating recycled aggregate possess good economic and environmental impacts.

scholarly journals PROPERTIES OF RECYCLED AGGREGATE CONCRETE

2014 ◽  
Vol 5 (2) ◽  
Author(s):  
Mirjana Malešev ◽  
Vlastimir Radonjanin ◽  
Gordana Broćeta
Keyword(s):  
Great Powers ◽  
Recycled Concrete ◽  
Recycled Aggregate Concrete ◽  
Construction And Demolition Waste ◽  
Recycled Aggregate ◽  
Concrete Aggregate ◽  
Demolition Waste ◽  
Aggregate Concrete ◽  
Recycling Industry ◽  
Concrete Mixtures

Following an example of the world's great powers that developed the recycling industry after natural disasters and wars, the paper points to the possibility of using large quantities of construction and demolition waste, generated as a result of the recent floods in the BiH and Serbia. Based on the years of extensive experimental research, and the research conducted by eminent experts, an overview is provided of the most basic properties and application of recycled aggregate concrete. It has been shown that the application of coarse recycled concrete aggregate, as the component materials in the concrete mixtures, it is possible to produce structural concrete that can be satisfactory and even with high quality, which primarily depends on the characteristics of crushed demolished concrete.

The potency of recycled aggregate in new concrete: a review

2019 ◽  
Vol 19 (4) ◽  
pp. 594-613 ◽  
Author(s):  
Emmanuel Ejiofor Anike ◽  
Messaoud Saidani ◽  
Eshmaiel Ganjian ◽  
Mark Tyrer ◽  
Adegoke Omotayo Olubanwo
Keyword(s):  
Research Work ◽  
Recycled Aggregate Concrete ◽  
Construction And Demolition Waste ◽  
Recycled Aggregate ◽  
Mix Design ◽  
Recycled Aggregates ◽  
Demolition Waste ◽  
Aggregate Concrete ◽  
Content Type ◽  
Natural Aggregate

Purpose This paper aims to review the effect of using recycled aggregates (RA) on the properties of recycled aggregate concrete (RAC) following the steady rise in global demand for concrete and the large generation of construction and demolition waste. Design/methodology/approach This study reviewed relevant literature of research work carried out by previous researchers, leading to a deeper understanding of the properties of both RA and RAC. The properties of RA and RAC reported in the various studies were then compared to their corresponding natural aggregate (NA) and natural aggregate concrete, as well as the specifications provided in different codes of practice. In addition, the mix design methods appropriate to RAC and the cost implication of using RA were reviewed. Findings Findings show that the contribution of RA to strength appears inferior in comparison to NA. The shortcoming is attributed to the mortar attached to the RA, which raises its water absorption capacity and lowers its density relative to those of NA. However, it has been reported that the use of regulated quantity of RA, new mixing and proportioning methods, the addition of admixtures and strengthening materials such as steel fibres, can improve both mechanical and durability properties of RAC. Cost evaluation also showed that some savings can be realized by using RA instead of NA. Originality/value This research serves as a guide for future works and suggests that the use of RA as aggregate in new concrete is technically possible, depending on the mix design method adopted.

Sign in / Sign up

Export Citation Format

Share Document