Modeling and Simulation of Bow-Shaped Piezoelectric Energy Harvester

2014 ◽  
Vol 1033-1034 ◽  
pp. 1338-1342 ◽  
Author(s):  
Bing Jiang ◽  
Shuai Yuan ◽  
Jian Bo Xin ◽  
Li Juan Chen ◽  
Yu Guo Hao ◽  
...  
Keyword(s):  
Finite Element ◽  
Energy Harvester ◽  
Geometric Model ◽  
Broad Band ◽  
Low Frequency ◽  
Research Field ◽  
Response Analysis ◽  
Side Peak ◽  
Element Analysis ◽  
Piezoelectric Energy

In recent years, new energy supply (energy self-sufficiency) technology which can replace the traditional battery supply has become a hot topic in global research field of microelectronic devices. A new low-frequency trapezoidal bow-shaped piezoelectric energy harvester (TBPEH) was proposed. The geometric model and finite element model (FEM) were built. The static analysis, modal analysis and harmonic response analysis of the TBPEH were discussed by using the Finite Element Analysis(FEA). Then traditional rectangular bow-shaped piezoelectric energy harvester(RBPEH) was compared with the new TBPEH. Simulation showed that the TBPEH could harvest energy more effectively than the RBPEH. The output voltage was increased by 135% with little change in resonant frequency, and indicator of the inhibition of side peak (SPI) which represented the capability of broad-band energy harvesting rose 11.2%. The TBPEH resonance frequency is 34.1Hz, which can be applied to the low frequency environment.

Novel Low-Frequency Rectangular-Loop Piezoelectric Energy Harvester

2014 ◽  
Vol 635-637 ◽  
pp. 928-931
Author(s):  
Shuai Yuan ◽  
Bing Jiang ◽  
Li Juan Chen ◽  
Yu Guo Hao ◽  
Jian Bo Xin ◽  
...  
Keyword(s):  
Resonant Frequency ◽  
Output Voltage ◽  
Energy Harvester ◽  
Low Frequency ◽  
Effective Bandwidth ◽  
Response Analysis ◽  
Element Analysis ◽  
Piezoelectric Energy ◽  
The Finite Element Analysis ◽  
Harmonic Response Analysis

The ambient energy harvesting based on piezoelectric has become an important subject in recent research publications. A new rectangular-loop piezoelectric energy harvester(RLPEH) is proposed. The characteristic is analyzed by the finite element analysis (FEA) which includes the static analysis, modal analysis and harmonic response analysis. The analysis results show that the RLPEH could reduce the resonant frequency and improve the output voltage. The three order resonant frequency is 18.6Hz, 40.8Hz and 85.4Hz. The output voltage is 42V under 3m/s2 of acceleration and the effective bandwidth is 18.7Hz with output voltage above 10V.

Novel Trapezoidal-Loop Piezoelectric Energy Harvester

2014 ◽  
Vol 672-674 ◽  
pp. 402-406
Author(s):  
Bing Jiang ◽  
Shuai Yuan ◽  
Xiao Hui Xu ◽  
Mao Sheng Ding ◽  
Ye Yuan ◽  
...  
Keyword(s):  
Output Voltage ◽  
Energy Harvester ◽  
Research Field ◽  
Structure Design ◽  
Loop Structure ◽  
Element Analysis ◽  
Resonant Frequencies ◽  
First Order ◽  
Microelectronic Devices ◽  
Piezoelectric Energy

In recent years, piezoelectric energy harvester which can replace the traditional battery supply has become a hot topic in global research field of microelectronic devices. Characteristics of a trapezoidal-loop piezoelectric energy harvester (TLPEH) were analyzed through finite-element analysis. The output voltage density is 4.251V/cm2 when 0.1N force is applied to the free end of ten-arm energy harvester. Comparisons of the resonant frequencies and output voltages were made. The first order resonant frequency could reach 15Hz by increasing the number of arms. Meanwhile, the output voltage is improved greatly when excited at first-order resonant frequencies. The trapezoidal-loop structure of TLPEH could enhance frequency response, which means scavenging energy more efficiently in vibration environment. The TLPEH mentioned here might be useful for the future structure design of piezoelectric energy harvester with low resonance frequency.

Finite-Element Analysis of a Varying-Width Bistable Piezoelectric Energy Harvester

2015 ◽  
Vol 3 (12) ◽  
pp. 1243-1249 ◽  
Author(s):  
Tarun Kumar ◽  
Rajeev Kumar ◽  
Vishal S. Chauhan ◽  
Jens Twiefel
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Energy Harvester ◽  
Element Analysis ◽  
Piezoelectric Energy

Component Mode Synthesis of a Vehicle System Model Using the Fictitious Mass Method

2006 ◽  
Vol 129 (1) ◽  
pp. 73-83 ◽  
Author(s):  
M. Karpel ◽  
B. Moulin ◽  
V. Feldgun
Keyword(s):  
Finite Element ◽  
Degrees Of Freedom ◽  
Structural Model ◽  
Synthesis Method ◽  
Normal Modes ◽  
Low Frequency ◽  
Component Mode Synthesis ◽  
Response Analysis ◽  
Element Analysis ◽  
Local Boundary

A new procedure for dynamic analysis of complex structures, based on the fictitious-mass component mode synthesis method, is presented. Normal modes of separate components are calculated by finite-element analysis with the interface coordinates loaded with fictitious masses that generate local boundary deformations in the low-frequency modes. The original fictitious-mass method is extended to include three types of component interconnections: displacement constraints, connection elements, and structural links. The connection elements allow the introduction of springs and dampers between the interface points without adding structural degrees of freedom. The structural links facilitate the inclusion the discrete finite-element representation of typically small components in the coupling equations. This allows a convenient treatment of loose elements and the introduction of nonlinear effects and parametric studies in subsequent analyses. The new procedure is demonstrated with the structural model of a typical vehicle with four major substructures and a relatively large number of interface coordinates. High accuracy is obtained in calculating the natural frequencies and modes of the assembled structure and the separate components with the fictitious masses removed. Dynamic response analysis of the vehicle travelling over a rough road, performed by modal coupling, is in excellent agreement with that performed for the full model.

scholarly journals Potential and limitations of finite element modelling in assessing structural integrity of coralline algae under future global change

2015 ◽  
Vol 12 (19) ◽  
pp. 5871-5883 ◽  
Author(s):  
L. A. Melbourne ◽  
J. Griffin ◽  
D. N. Schmidt ◽  
E. J. Rayfield
Keyword(s):  
Climate Change ◽  
Finite Element ◽  
Structural Integrity ◽  
Geometric Model ◽  
Algal Growth ◽  
Coralline Algae ◽  
Rocky Shores ◽  
Element Analysis ◽  
Scan Data ◽  
The Impact

Abstract. Coralline algae are important habitat formers found on all rocky shores. While the impact of future ocean acidification on the physiological performance of the species has been well studied, little research has focused on potential changes in structural integrity in response to climate change. A previous study using 2-D Finite Element Analysis (FEA) suggested increased vulnerability to fracture (by wave action or boring) in algae grown under high CO2 conditions. To assess how realistically 2-D simplified models represent structural performance, a series of increasingly biologically accurate 3-D FE models that represent different aspects of coralline algal growth were developed. Simplified geometric 3-D models of the genus Lithothamnion were compared to models created from computed tomography (CT) scan data of the same genus. The biologically accurate model and the simplified geometric model representing individual cells had similar average stresses and stress distributions, emphasising the importance of the cell walls in dissipating the stress throughout the structure. In contrast models without the accurate representation of the cell geometry resulted in larger stress and strain results. Our more complex 3-D model reiterated the potential of climate change to diminish the structural integrity of the organism. This suggests that under future environmental conditions the weakening of the coralline algal skeleton along with increased external pressures (wave and bioerosion) may negatively influence the ability for coralline algae to maintain a habitat able to sustain high levels of biodiversity.

Sign in / Sign up

Export Citation Format

Share Document