Particulate Emission from Biomass Fuel Combustion

2015 ◽  
Vol 1125 ◽  
pp. 322-326
Author(s):  
J. Nor Ruwaida ◽  
M. Rashid ◽  
M.M. Syahirah

The remarkable growth of palm oil industry in Malaysia is undeniable. Approximately, one million ton of crude palm oil is produced by the industry in a month, thus put Malaysia as one of the largest producer in the world. Most of the mills are operated on cogeneration system, where the biomass residue of palm fibre and shell are used as fuel in the mill boilers mostly to generate steam and also electricity. This practise however produced considerable amount of particulates in terms of fly ash emitting to the environment. Thus, this study is to evaluate the particulate emission from five palm oil mill boilers with steam capacity ranging from 17-35 tonne/h. The results showed that the average particulate emission concentration exiting the stack was 2.21±1.20 g/Nm3 (corrected to 7% oxygen concentration), ranging from 0.42 to 3.77 g/Nm3. The study suggests that the fuel feed rates of fiber and shell was one of the parameters affecting the emission concentration in the boiler. Particulate morphology were also being presented in this study.

2021 ◽  
Vol 56 (2) ◽  
pp. 405-418
Author(s):  
Dyah Wulan Sari ◽  
Haura Azzahra Tarbiyah Islamiya ◽  
Wenny Restikasari ◽  
Emi Salmah

Indonesia has become the largest producer and exporter of crude palm oil commodities in the world. Therefore, the production of CPO turns out to be very greedy for land. There are any problems in production CPO, therefore the study aims to develop a conceptual framework of the source of output growth, whether driven by input or productivity growth, and to implement this concept by investigating the source of output growth in the crude palm oil industry in Indonesia. The investigation applies firm-level panel data and follows a quantitative approach using general method of moments to estimate the production coefficients and calculate the input and productivity growth. The result shows that the output growth of the crude palm oil industry does not lead in productivity growth driven. It seems to be driven by input growth, not by productivity growth. Since growth is still driven by input, the crude palm oil industry will be less competitive in the world market. The high world demand for crude palm oil commodities from Indonesia must be met by using more efficient input factors, optimizing production scale, and supporting technological progress. The government, therefore, must have strategies that are more competitive in the global market.


2018 ◽  
Vol 23 (2) ◽  
pp. 82
Author(s):  
Fradana Subagya ◽  
Endy Suwondo

The problem faced by the palm oil industry today is the instability of the Crude Palm Oil (CPO) yield.  The condition of Fresh Fruit Bunches (FFB) starting from the time of harvesting to transporting to the factory, including during stockpiling at the palm oil mill, is an influential factor affecting the yield of CPO.  This study aimed to find the factors causing instability of CPO yield in the palm oil industry.  I-MR control maps and fishbone diagrams were used to analyze the factors that cause low CPO yields.  From the data analysis for three years, the evidence of CPO yield was not statistically controlled.  The causative factor of CPO yield instability included the quality of raw materials, production equipment, character of workers, and environmental conditions, with the dominating factor was the low quality of raw materials.


Author(s):  
Agnes C. Sequiño ◽  
Jessica Magallon-Avenido

Indonesia, being the world leader in the production of crude palm oil, has been successful in serving the domestic and world market with palm products and palm derivatives. The industry contributes US$17.6 billion through exports in 2012. At present, the demand for crude palm oil has soared high due to the increasing awareness of the varied uses of palm oil.The challenge to countries cultivating oil palm is how to cope with the local and global demand.The focus now is to increase plantation areas to produce a higher volume of crude oil to serve the needs of the world market. Today, the total land area planted to oil palm in Indonesia has reached 9.7 million hectares. This study used data mining and Delphi technique.  Data were sourced from public domain websites and several databases. This study determined the gap between production and utilization and to provide information to existing industry players, policy makers, future investors, and would-be entrants to the industry on the latest  trends noting the fast development of the industry not only in Indonesia but also in other Southeast Asian countries. Although Indonesia has been successful in providing the local and international  market with palm oil products and palm derivatives,  it has to benchmark with other palm producing countries to avoid industry stagnation and to intensify diversification particularly in the development of new edible  products to take advantage of the health benefits derived  from the use of  palm oil.


Author(s):  
Lelita Rosanna Banjarnahor ◽  
Siti Rahmah ◽  
Marini Damanik ◽  
Moondra Zubir

Indonesia has been placed as the world's first producer of crude palm oil and crude palm oil.  In producing crude palm oil (CPO) and palm kernel oil (PKO), the palm oil industry relies heavily on processing fresh fruit bunches (FFB) at palm oil mills (POM) and is traded internationally. However, this process also produces solid organic waste [  i.e. empty bunches (EFB)], which reach up to 25 %% of FFB.  The analysis shows that the application of empty bunches as organic fertilizer has not been able to increase the amount of nutrients in palm oil leaves and increase palm oil production.  Application of palm oil mill effluent which is able to increase the amount of nutrients in palm oil, especially nitrogen and phosphate, and a positive impact to increase the production of oil palm plantations, especially on productivity (tons / ha).


Author(s):  
Wai Loan Liew ◽  
Khalida Muda ◽  
Mohd. Azraai Kassim ◽  
Augustine Chioma Affam ◽  
Soh Kheang Loh

Over the decades the palm oil industry has managed some challenging environmental concerns regarding land transformation and degradation, increase in eutrophication, changing habitats of wildlife, pesticides runoff into inland watercourses, and probable climate change. Countries producing palm oil desire to do so in a more sustainable way that will leave the environment evergreen. Therefore this paper aims to encourage sustainable management of agro-industrial waste and its potential in making financial returns from the same waste. Hence, the study was conducted with the participation of seven local palm oil mills having different capacities and operation age. Attention was given to milling waste as they could cause serious environmental menace if unattended to properly. Milling waste includes lignocellulosic palm biomass namely the empty fruit bunches (EFB), oil palm shell (OPS), mesocarp fibres, palm oil mill effluent (POME), and palm oil mill sludge (POMS), as well as solid waste generated from the further processing of these biomass into the palm oil fuel ashes (POFA) and palm oil clinkers (POC). The opportunities available to the Malaysian palm oil industry and the financial benefits which may accrue from waste generated during palm oil production process cannot be over emphasized.


Sign in / Sign up

Export Citation Format

Share Document