Influence of Fly Ash on the Mechanical Properties of Engineered Cementitious Composites Cured at High Temperature

2010 ◽  
Vol 113-116 ◽  
pp. 1293-1296
Author(s):  
Yu Zhu ◽  
Ying Zi Yang ◽  
Hong Wei Deng ◽  
Yan Yao
Keyword(s):  
Mechanical Properties ◽  
Compressive Strength ◽  
Fly Ash ◽  
High Volume ◽  
Bending Test ◽  
Cementitious Composites ◽  
Test Results ◽  
Four Point Bending ◽  
High Volume Fly Ash ◽  
Compressive Strength Test

In order to investigate the mechanical properties of cementitious composites (ECC) cured at 60°C, four-point bending test and compressive strength test are employed to analyze the effect of fly ash on the properties of ECC. The replacement ratio of cement with fly ash is 50%, 70% and 80%, respectively. The test results indicate that ECC with high volume fly ash still remain the characteristic of pseudo-strain hardening and the deflection of ECC increases remarkably by adding more fly ash. The observations of ECC indicate that the crack width is relatively smaller for higher volume fly ash ECC. Meanwhile, compressive strength of ECC specimens with 80% fly ash can reach to 70MPa. This is helpful to produce precast ECC with high volume of fly ash.

FLY ASH AND BAGASSE FIBER INFLUENCES ON MECHANICAL PROPERTIES OF GREEN HYBRID FIBER-REINFORCED CEMENTITIOUS COMPOSITES

2014 ◽  
Vol 1 (1) ◽  
Author(s):  
He Tian ◽  
Y. X. Zhang
Keyword(s):  
Mechanical Properties ◽  
Compressive Strength ◽  
Fly Ash ◽  
High Volume ◽  
Fiber Content ◽  
Modulus Of Rupture ◽  
Fiber Reinforced ◽  
Cement Ratio ◽  
High Volume Fly Ash ◽  
Bagasse Fiber

In this paper, a new green fiber-reinforced cementitious composite containing high volume fly ash and hybrid steel and bagasse fibers is developed. Eco-friendly bagasse fibers from industrial waste and steel fibers are used to improve the mechanical behavior of the new composite, and high-volume fly ash is used to decrease the usage of cement in order to be more environmentally friendly. The influence of the fiber content and fly ash/cement ratio on the mechanical properties of the composite is investigated through the study of the mechanical properties of the new composite, such as compressive strength, modulus of elasticity, and modulus of rupture. It is found that compressive strength, Young's modulus of the composite, decreases with the increase of the fly ash/cement ratio and bagasse fiber content. However, the modulus of rupture of the composite increases firstly with bagasse fiber content, and decreases when bagasse fiber content reaches 3% by volume.

Effect of Nano Silica and Ultrafine Fly Ash on Compressive Strength of High Volume Fly Ash Mortar

2013 ◽  
Vol 368-370 ◽  
pp. 1061-1065 ◽  
Author(s):  
Steve W.M. Supit ◽  
Faiz U.A. Shaikh ◽  
Prabir K. Sarker
Keyword(s):  
Compressive Strength ◽  
Fly Ash ◽  
High Volume ◽  
Partial Replacement ◽  
Strength Development ◽  
Test Results ◽  
X Ray Diffraction ◽  
Nano Silica ◽  
High Volume Fly Ash ◽  
Class F Fly Ash

This paper evaluates the effect of Ultrafine Fly Ash (UFFA) and nanoSilica (NS) on compressive strength of high volume fly ash (HVFA) mortar at 7 days and 28 days. Three series of mortar mixes are considered in the first part of this study. In the first series the effect of high content of class F fly ash as partial replacement of cement at 40, 50 and 60% (by wt.) are considered. While in the second and third series, the UFFA and NS are used as partial replacement of cement at 5%, 8%, 10%, 12% and 15% and 1%, 2%, 4%, 6% and 8% (by wt.) of cement, respectively. The UFFA and the NS content which exhibited highest compressive strength in the above series are used in the second part where their effects on the compressive strength of HVFA mortars are evaluated. Results show that the mortar containing 10% UFFA as partial replacement of cement exhibited the highest compressive strength at both 7 and 28 days among all UFFA contents. Similarly, the mortar containing 2% NS as partial replacement of cement exhibited the best performance. Interestingly, the use of UFFA in HVFA mortars did not improve the compressive strength. However, the use of 2% and 4% NS showed improvement in the compressive strength of HVFA mortar containing 40% and 50% fly ash at both ages. The effects of NS and UFFA on the hydration and strength development of HVFA mortar is also evaluated through X-Ray Diffraction (XRD) test. Results also show that the UFFA and NS can significantly reduce the calcium hydroxide (CH) in HVFA mortars.

Mechanical Properties of a Green Hybrid Fibre-Reinforced Cementitious Composite

2013 ◽  
Vol 438-439 ◽  
pp. 275-279 ◽  
Author(s):  
He Tian ◽  
Yi Xia Zhang
Keyword(s):  
Mechanical Properties ◽  
Compressive Strength ◽  
Fly Ash ◽  
High Volume ◽  
Ash Content ◽  
Cementitious Composite ◽  
Green Composite ◽  
Cement Ratio ◽  
High Volume Fly Ash ◽  
Hybrid Fibre

In this paper, a new green hybrid fibre-reinforced cementitious composite with high volume fly ash and steel and bagasse fibres is developed. High volume fly ash is used to partly replace cement and make the composite greener. Eco-friendly bagasse fibres from industrial waste and steel fibres are utilized to improve the mechanical behavior. In particularly, the influence of the parameters such as the sand/cement ratio and fly ash/cement ratio on the mechanical properties of the composite is investidated by evaluating the essential mechanical properties such as compressive strength and modulus of elasticity. The new green composite is found to be sustainable with high compressive. It is found that compressive strength of the composite decreases while the Young's modulus increases with the increase of the sand content, and that compressive strength and Youngs modulus of the composite decreases with the increase of the fly ash content.

Basic rheological and mechanical properties of high-volume fly ash grouts

2002 ◽  
Vol 16 (6) ◽  
pp. 353-363 ◽  
Author(s):  
J Mirza ◽  
M.S Mirza ◽  
V Roy ◽  
K Saleh
Keyword(s):  
Mechanical Properties ◽  
Fly Ash ◽  
High Volume ◽  
High Volume Fly Ash

Effect of ultrafine fly ash on mechanical properties of high volume fly ash mortar

2014 ◽  
Vol 51 ◽  
pp. 278-286 ◽  
Author(s):  
Steve W.M. Supit ◽  
Faiz U.A. Shaikh ◽  
Prabir K. Sarker
Keyword(s):  
Mechanical Properties ◽  
Fly Ash ◽  
High Volume ◽  
High Volume Fly Ash

scholarly journals Influence of Particle Size Distribution of High Calcium Fly Ash on HVFA Mortar Properties

2018 ◽  
Vol 20 (2) ◽  
pp. 51
Author(s):  
Antoni . ◽  
Hendra Surya Wibawa ◽  
Djwantoro Hardjito
Keyword(s):  
Particle Size ◽  
Compressive Strength ◽  
Fly Ash ◽  
Particle Size Distribution ◽  
Size Distribution ◽  
Setting Time ◽  
High Volume ◽  
High Volume Fly Ash ◽  
High Calcium ◽  
High Calcium Fly Ash

This study evaluates the effect of particle size distribution (PSD) of high calcium fly ash on high volume fly ash (HVFA) mortar characteristics. Four PSD variations of high calcium fly ash used were: unclassified fly ash and fly ash passing sieve No. 200, No. 325 and No. 400, respectively. The fly ash replacement ratio of the cementitious material ranged between 50-70%. The results show that with smaller fly ash particles size and higher levels of fly ash replacement, the workability of the mixture was increased with longer setting time. There was an increase in mortar compressive strength with finer fly ash particle size, compared to those with unclassified ones, with the highest strength was found at those with fly ash passing mesh No. 325. The increase was found due to better compactability of the mixture. Higher fly ash replacement reduced the mortar’s compressive strength, however, the rate was reduced when finer fly ash particles was used.

Sign in / Sign up

Export Citation Format

Share Document