Effect of Nanosilica on Mechanical and Thermal Properties of Cement Composites for Thermal Energy Storage Materials

2015 ◽  
Vol 1131 ◽  
pp. 182-185
Author(s):  
Pongsak Jittabut
Keyword(s):  
Thermal Conductivity ◽  
Particle Size ◽  
Heat Capacity ◽  
Compressive Strength ◽  
Thermal Properties ◽  
Thermal Energy ◽  
Energy Storage Materials ◽  
Mechanical And Thermal Properties ◽  
Storage Materials ◽  
Nanosilica Particle

This research article presents the mechanical and thermal properties of cement-based composite for thermal energy storage materials. The effects of nanosilica particle size and concentration determined by mixing nanosilica particle size of 50 nm, using nanosilica were of 1-5 wt%. Thermal properties coefficients were tested using a direct measuring instrument with surface probe (ISOMET2114). The influence of nanosilica on the performance, such as compressive strength, bulk density, thermal conductivity, volume heat capacity and thermal diffusivity of hardened composite cement pastes were studied for future solar thermal energy materials with better performance. According to the development of thermal storage materials and their application environment requirement in solar thermal power, the specimens were subjected to heat at 350, and 900°C. It were observed that, before heating, the compressive strength is optimized at nanosilica amount of 4wt% at the age of 28 days. Moreover, after heating at 350 oC and 900°C, the thermal conductivity and volume heat capacity of the cement paste enriched with nanosilica were significantly lesser than that of the before heating one.

Effect of Nano-TiO2 on Mechanical and Thermal Properties of Cement Composites for Thermal Energy Storage Materials

2015 ◽  
Vol 804 ◽  
pp. 115-118
Author(s):  
Pongsak Jittabut
Keyword(s):  
Thermal Conductivity ◽  
Heat Capacity ◽  
Compressive Strength ◽  
Thermal Properties ◽  
Energy Storage ◽  
Thermal Energy ◽  
Thermal Energy Storage ◽  
Energy Storage Materials ◽  
Mechanical And Thermal Properties ◽  
Storage Materials

This research article presents the mechanical and thermal properties of cement-based composite for thermal energy storage materials enriched with containing nanoTiO2 particle size (25 nm) and concentration (1-5 wt.%) were systematically investigated. Thermal properties coefficients were tested using a direct measuring instrument with surface probe (ISOMET2114). The influence of nanoTiO2 on the performance, such as compressive strength, bulk density, thermal conductivity, volume heat capacity and thermal diffusivity of hardened composite cement pastes were studied for future solar thermal energy materials with better performance. According to the development of thermal storage materials and their application environment requirement in solar thermal power, the specimens were subjected to heat at 350°C and 900°C. It was observed that, before heating, the compressive strength is optimized at nanoTiO2 amount of 2 wt%. Moreover, after heating at 350 °C and 900°C, the thermal conductivity and volume heat capacity of the cement paste enriched with nanoTiO2 were significantly lesser than that of the before heating one.

Study of the Impact of Rice Straw Particle Size on the Mechanical and Thermal Properties of Straw Lime Concretes

2022 ◽  
Author(s):  
Youssef El Moussi ◽  
Laurent Clerc ◽  
Jean-Charles Benezet
Keyword(s):  
Thermal Conductivity ◽  
Particle Size ◽  
Compressive Strength ◽  
Thermal Properties ◽  
Water Absorption ◽  
Rice Straw ◽  
Absorption Capacity ◽  
Mechanical And Thermal Properties ◽  
Water Absorption Capacity ◽  
The Impact

The use of bio-based concretes performed with lignocellulosic aggregates constitute an interesting solution for reducing the energy consumption, greenhouse gas emissions and CO2 generated by the building sector. Indeed, bio-based materials could be used as an alternative of traditional materials such as expended polystyrene and mineral resources (e.g. glass and rock wools) for insulation. Furthermore, these bio-based concretes are known for their interesting insulation properties, indeed they allow to enhance thermal properties of buildings and enables moisture management which lead to design efficient building materials. For this purpose, bio-based concrete using rice straw as aggregate are studied in this present work. The impact of the characteristics of rice straw particle (particle size distribution, bulk density, and water absorption capacity, etc.) on both the mechanical and thermal properties of the bio-based concrete are investigated. Five formulations of rice straw concrete are examined, compared and then classified in terms of insulation properties and mechanical properties. The assessments are based on the measurement of density and thermal conductivity. The variation of compressive strength in function of the characteristics (mean particle length) of rice straw particle are assessed and discussed. The investigation covers also the porosity and density. Tests are also carried out on agricultural by-products with a view to highlight their chemical, physical and structural proprieties. The results show that the use of large particles with low water absorption capacity induce lighter concretes with the density between 339 and 505 kg/m3 and lead to a high compressive strength with a high mechanical deformability. Furthermore, it appears that an increase in the average length of rice straw particle lead to decrease of thermal conductivity of bio-based concretes. It varies from 0.062 to 0.085 W/(m.K).

scholarly journals Bio-based rigid polyurethane foam prepared from apricot stone shell-based polyol for thermal insulation application – Part 2: Morphological, mechanical, and thermal properties

BioResources ◽  
2020 ◽  
Vol 15 (3) ◽  
pp. 6080-6094
Author(s):  
Muhammed Said Fidan ◽  
Murat Ertaş
Keyword(s):  
Thermal Conductivity ◽  
Compressive Strength ◽  
Thermal Properties ◽  
Thermogravimetric Analysis ◽  
Polyurethane Foam ◽  
Flame Retardants ◽  
Compressive Modulus ◽  
Cell Diameter ◽  
Mechanical And Thermal Properties ◽  
Rigid Polyurethane Foam

The procedure for the liquefaction of apricot stone shells was reported in Part 1. Part 2 of this work determines the morphological, mechanical, and thermal properties of the bio-based rigid polyurethane foam composites (RPUFc). In this study, the thermal conductivity, compressive strength, compressive modulus, thermogravimetric analysis, flammability tests (horizontal burning and limited oxygen index (LOI)) in the flame retardants), and scanning electron microscope (SEM) (cell diameter in the SEM) tests of the RPUFc were performed and compared with control samples. The results showed the thermal conductivity (0.0342 to 0.0362 mW/mK), compressive strength (10.5 to 14.9 kPa), compressive modulus (179.9 to 180.3 kPa), decomposition and residue in the thermogravimetric analysis (230 to 491 °C, 15.31 to 21.61%), UL-94 and LOI in the flame retardants (539.5 to 591.1 mm/min, 17.8 to 18.5%), and cell diameter in the SEM (50.6 to 347.5 μm) of RPUFc attained from liquefied biomass. The results were similar to those of foams obtained from industrial RPUFs, and demonstrated that bio-based RPUFc obtained from liquefied apricot stone shells could be used as a reinforcement filler in the preparation of RPUFs, specifically in construction and insulation materials. Moreover, liquefied apricot stone shell products have potential to be fabricated into rigid polyurethane foam composites.

Evaluation of the thermal properties of SrCO3-microencapsulated palmitic acid composites as thermal energy storage materials

2019 ◽  
Vol 140 (5) ◽  
pp. 2123-2130 ◽  
Author(s):  
Ali Sobhani-Nasab ◽  
Hossein Pourmohamadian ◽  
Mehdi Rahimi-Nasrabadi ◽  
Ghanbar Ali Sheikhzadeh ◽  
Hassan Basirat Tabrizi
Keyword(s):  
Thermal Properties ◽  
Energy Storage ◽  
Palmitic Acid ◽  
Thermal Energy ◽  
Thermal Energy Storage ◽  
Energy Storage Materials ◽  
Storage Materials

scholarly journals Thermal properties of thermochemical heat storage materials

2020 ◽  
Vol 22 (8) ◽  
pp. 4617-4625 ◽  
Author(s):  
Julianne E. Bird ◽  
Terry D. Humphries ◽  
Mark Paskevicius ◽  
Lucas Poupin ◽  
Craig E. Buckley
Keyword(s):  
Thermal Properties ◽  
Energy Storage ◽  
Transport Properties ◽  
Thermal Energy ◽  
Thermal Energy Storage ◽  
Heat Storage ◽  
Energy Storage Materials ◽  
Storage Materials ◽  
Thermochemical Heat Storage ◽  
Heat Storage Materials

The thermal transport properties of potential thermal energy storage materials have been measured using identical conditions enabling direct comparison.

scholarly journals Physical Properties of Soy-Phosphate Polyol-Based Rigid Polyurethane Foams

2012 ◽  
Vol 2012 ◽  
pp. 1-8 ◽  
Author(s):  
Hongyu Fan ◽  
Ali Tekeei ◽  
Galen J. Suppes ◽  
Fu-Hung Hsieh
Keyword(s):  
Thermal Conductivity ◽  
Compressive Strength ◽  
Thermal Properties ◽  
Water Content ◽  
Polyurethane Foams ◽  
Solid Polymer ◽  
Mechanical And Thermal Properties ◽  
Blowing Agent ◽  
Isocyanate Index ◽  
Pu Foams

Water-blown rigid polyurethane (PU) foams were made from 0–50% soy-phosphate polyol (SPP) and 2–4% water as the blowing agent. The mechanical and thermal properties of these SPP-based PU foams (SPP PU foams) were investigated. SPP PU foams with higher water content had greater volume, lower density, and compressive strength. SPP PU foams with 3% water content and 20% SPP had the lowest thermal conductivity. The thermal conductivity of SPP PU foams decreased and then increased with increasing SPP percentage, resulting from the combined effects of thermal properties of the gas and solid polymer phases. Higher isocyanate density led to higher compressive strength. At the same isocyanate index, the compressive strength of some 20% SPP foams was close or similar to the control foams made from VORANOL 490.

Mechanical and Thermal Properties of PCM Wallboards Based on Gypsum and Paraffin

2011 ◽  
Vol 71-78 ◽  
pp. 3553-3557
Author(s):  
Xiao Peng Wang ◽  
Zhen Qiu Shen ◽  
Yi Zhang ◽  
Dong Xu Li
Keyword(s):  
Thermal Conductivity ◽  
Compressive Strength ◽  
Thermal Properties ◽  
Energy Consumption ◽  
Building Energy ◽  
Building Envelope ◽  
Mechanical And Thermal Properties ◽  
Building Energy Consumption

This paper studied on preparation, mechanical and thermal properties of two PCM wallboards made of gypsum and paraffin composite, PCM particles wallboard and PCM bag packed wallboard. Density, flexural and compressive strength and thermal conductivity of PCM particles wallboards deceased as PCM particles dosage increasing. Only PCM particles wallboard with PCM particles dosage 30% is suitable. Thermal comparison between PCM wallboards and pure gypsum wallboard shows that two PCM wallboards have better thermal properties and PCM wallboards can be used in building envelope to cut down building energy-consumption.

Sign in / Sign up

Export Citation Format

Share Document