The Statistical Approach to Study the Effects of the Size of Coarse Aggregates and Percentage of Steel Fiber on Mechanical Properties and Ductility of Concrete

2021 ◽  
Vol 1166 ◽  
pp. 95-112
Author(s):  
Seiyed Ali Haj Seiyed Taghia ◽  
Hamid Reza Darvishvand ◽  
Masood Ebrahimi ◽  
Elham Keramati
Keyword(s):  
Mechanical Properties ◽  
Statistical Approach ◽  
Steel Fiber ◽  
Aggregate Size ◽  
Fiber Content ◽  
Maximum Aggregate Size ◽  
Dramatic Improvement ◽  
Mean Values ◽  
Coarse Aggregates ◽  
Concrete Members

Concrete members are reinforced by steel fibers to overcome their brittle nature. This paper is focused on the effect of percentage of fiber and the maximum aggregate size on mechanical properties of concrete samples such as compressive and tensile strengths, and ductility. The mean values of these quantities show that by increasing the reinforcement content to 0.66% and the size to 12.5 mm, there is a dramatic improvement on properties of samples. Also, they demonstrate that the size of coarse aggregate has more effect on improvement of the quantities in comparison to steel fiber content and changing the size and fiber content has more effects on ductility than mechanical properties. Statistical approach which considers standard deviations of experimental data, confirms that the gravel regardless of fiber content, leads to the highest improvement on properties with size of 12.5 mm. But the results show for volumetric steel fiber without considering aggregate size, is 0.33%. This clearly indicates the effect of data scattering on mean values of mechanical properties and ductility.

Analysis and optimization of mechanical properties of recycled concrete based on aggregate characteristics

2021 ◽  
Vol 28 (1) ◽  
pp. 516-527
Author(s):  
Jiangwei Bian ◽  
Wenbing Zhang ◽  
Zhenzhong Shen ◽  
Song Li ◽  
Zhanglan Chen
Keyword(s):  
Mechanical Properties ◽  
Elastic Modulus ◽  
Coarse Aggregate ◽  
Aggregate Size ◽  
Peak Stress ◽  
Recycled Concrete ◽  
Maximum Aggregate Size ◽  
Coarse Aggregates ◽  
Aggregate Content ◽  
Aggregate Shape

Abstract The most significant difference between recycled and natural concretes lies in aggregates. The performance of recycled coarse aggregates directly affects the characteristics of recycled concrete. Therefore, an in-depth study of aggregate characteristics is of great significance for improving the quality of recycled concrete. Based on the coarse aggregate content, maximum aggregate size, and aggregate shape, this study uses experiments, theoretical analysis, and numerical simulation to reveal the impact of aggregate characteristics on the mechanical properties of recycled concrete. In this study, we selected the coarse aggregate content, maximum aggregate size, and the aggregate shape as design variables to establish the regression equations of the peak stress and elastic modulus of recycled concrete using the response surface methodology. The results showed that the peak stress and elastic modulus of recycled concrete reach the best when the coarse aggregate content is 45%, the maximum coarse aggregate size is 16 mm, and the regular round coarse aggregates occupy 75%. Such results provide a theoretical basis for the resource utilization and engineering design of recycled aggregates.

Effects of maximum particle size of coarse aggregates and steel fiber contents on the mechanical properties and impact resistance of recycled aggregate concrete

2021 ◽  
pp. 136943322110179
Author(s):  
DongTao Xia ◽  
ShaoJun Xie ◽  
Min Fu ◽  
Feng Zhu
Keyword(s):  
Mechanical Properties ◽  
Particle Size ◽  
Steel Fiber ◽  
Impact Resistance ◽  
Recycled Aggregate Concrete ◽  
Recycled Aggregate ◽  
Aggregate Concrete ◽  
Coarse Aggregates ◽  
Maximum Particle Size ◽  
Maximum Particle

Fiber reinforced recycled aggregate concrete has become a new type of green concrete material. The maximum particle size of coarse aggregates and steel fiber contents affect the mechanical properties and impact resistance of recycled aggregate concrete. However, such studies are rare in literature. The present paper shortens the gap through experimental study. A total of 144 specimens of 12 kinds of concrete mixtures were tested, which adopted different steel fiber volume admixtures (0%, 0.8%, 1.0%, 1.2%) and recycled coarse aggregates in different maximum particle sizes (9.5, 19, 31.5 mm) replacing 30% natural coarse aggregate. The compressive strength, splitting tensile strength, and impact resistance of the 12 concrete mixtures were tested. The results showed that the compressive strength, splitting tensile strength, and impact resistance of recycled aggregate concrete increased first and then decreased with the increase of the maximum particle size. The recycled aggregate concrete with the maximum particle size of 19 mm had the highest mechanical properties and impact resistance. Besides, with the increase of steel fiber content, the compressive strength, splitting tensile strength, and impact resistance of recycled aggregate concrete showed an increasing trend. Considering a large amount of experimental data and the coupling effect of steel fiber contents and the maximum particle size of coarse aggregates, the Weibull distribution function was introduced to analyze the impact test results and predict the number of resistance to impact under different failure probabilities. The results showed that the number of blows of the recycled aggregate concrete followed a two-parameter Weibull distribution, and the estimated value of the number of resistance to impact for failure increased with the increase of the failure probability.

Mechanical properties of steel fiber-reinforced UHPC mixtures exposed to elevated temperature: Effects of exposure duration and fiber content

2019 ◽  
Vol 168 ◽  
pp. 291-301 ◽  
Author(s):  
Shamsad Ahmad ◽  
Mehboob Rasul ◽  
Saheed Kolawole Adekunle ◽  
Salah U. Al-Dulaijan ◽  
Mohammed Maslehuddin ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Elevated Temperature ◽  
Temperature Effects ◽  
Exposure Duration ◽  
Steel Fiber ◽  
Fiber Content ◽  
Fiber Reinforced

EFFECT OF DIFFERENT TYPES OF FIBER UTILIZATION ON MECHANICAL PROPERTIES OF RECYCLED AGGREGATE CONCRETE CONTAINING SILICA FUME

2020 ◽  
Vol 15 (1) ◽  
pp. 119-136 ◽  
Author(s):  
Muhammet Gökhan Altun ◽  
Meral Oltulu
Keyword(s):  
Mechanical Properties ◽  
Compressive Strength ◽  
Steel Fiber ◽  
Recycled Aggregate Concrete ◽  
Recycled Aggregate ◽  
Hybrid Fibers ◽  
Normal Concrete ◽  
Aggregate Concrete ◽  
Volume Fractions ◽  
Coarse Aggregates

ABSTRACT The use of recycled aggregate (RA) instead of natural aggregate (NA) in concrete is necessary for environmental protection and the effective utilization of resources. The addition of recycled aggregates in concrete increases shrinkage, porosity and decreases the mechanical properties compared to that of normal concrete. This study was aimed at investigating how the addition of various proportions of polypropylene and steel fiber affect the mechanical properties of recycled aggregate concrete (RAC). The natural coarse aggregates (NCAs) used in the production of normal concrete (NC) were replaced in 30% and 50% proportions by recycled coarse aggregates (RCAs) obtained from the demolished buildings. In this case, a polypropylene fiber (PF) content of 0.1% and steel fiber (SF) 1% and 2% volume fractions were used, along with hybrid fibers-a combination of the two. While the material performance of RAC compared to NC is analyzed by reviewing existing published literature, it is not evident what the use of RCAs and hybrid fibers have on the mechanical properties of concrete. The results showed that the compressive strength, flexural strength and impcat resistance of RAC were reduced as the percentage of RCAs increased. It was observed that the compressive strength was increased with the addition of 1% steel fiber in the RAC. The flexural and impact performance of steel fiber-reinforced concrete (Specimens NC and RAC) was increased as the volume fractions of steel fiber increased. The hybrid fiber reinforced concretes showed the best results in their mechanical performance of all the concrete groups.

Study of RPC Mechanical Properties and Anti-Freeze-Thaw Resistance

2010 ◽  
Vol 168-170 ◽  
pp. 1742-1748
Author(s):  
Yan Zhong Ju ◽  
Feng Wang ◽  
De Hong Wang
Keyword(s):  
Mechanical Properties ◽  
Silica Fume ◽  
Steel Fiber ◽  
Fiber Content ◽  
Reactive Powder Concrete ◽  
Cement Ratio ◽  
Water Cement Ratio ◽  
Freeze Thaw ◽  
Early Strength ◽  
Reactive Powder

To study the mechanical properties of RPC performance and freeze-thaw resistance，through the experimental study discussed the water-cement ratio, silica fume cement ratio, steel fiber content, curing system and other factors on the mechanical properties of reactive powder concrete and anti-freezing properties. Research indicates that many factors in the RPC, the water cement ratio is the most important factor, followed by the silica fume cement ratio, finally the steel fiber content, and curing system for the growth of its early strength also have a greater role.

scholarly journals Fresh and some mechanical properties of sifcon containing silica fume

2018 ◽  
Vol 162 ◽  
pp. 02003 ◽  
Author(s):  
Shakir Salih ◽  
Qais Frayyeh ◽  
Manolia Ali
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Silica Fume ◽  
Steel Fiber ◽  
Construction Material ◽  
Fiber Content ◽  
Splitting Tensile Strength ◽  
Partial Replacement ◽  
Cement Slurry ◽  
Fiber Concrete

Slurry infiltrated fiber concrete (SIFCON) is one of the recently developed construction material. SIFCON could be considered as a special type of fiber concrete with high fiber content. The matrix of SIFCON consists of flowing cement mortar or cement slurry. SIFCON has a very good potential for application in area where resistance to impact and high ductility are needed especially in designing the seismic retrofit, in the structures under impact and explosive effects and repair of structural reinforced concrete element. The main objective of this paper is to determine the effect of steel fiber content and silica fume (SF) cement replacement on the mechanical properties of SIFCON concrete. The percentage of SF replacement was 10% by weight of cement in SIFCON slurry, and three different volume fractions of hooked ended steel fiber (6, 8.5, and 11) % were used. The tested properties of SIFCON were compressive strength and splitting tensile strength which were carried out on standard size of cubes and cylinders respectively at the age of 7and 28 days. It was observed that the mechanical properties of SIFCON were affected in a positive manner by using silica fume as a partial replacement of cement and by adding steel fiber reinforcement in different percentages. The compressive and splitting tensile strength up to 83.7 MPa and 17.3MPa, respectively were obtained at the age of 28 days.

Sign in / Sign up

Export Citation Format

Share Document