Finite Element Analysis of the Stress on Cylinder of the Fluidized Bed Reactor for Fast Pyrolysis

2011 ◽  
Vol 201-203 ◽  
pp. 660-663
Author(s):  
Qing Ruo Xie ◽  
Yi Sun ◽  
Li Wen Zheng ◽  
Hu Qi Wang ◽  
Zhang Fa Tong
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Fluidized Bed ◽  
Safety Assessment ◽  
Scale Up ◽  
Fast Pyrolysis ◽  
Fluidized Bed Reactor ◽  
Element Analysis ◽  
Ansys Analysis ◽  
Different Temperatures

A new experimental fluidized bed reactor was investigated and designed which has been widely utilized for fast pyrolysis under different temperatures (T=727–973 K).The stresses of the reactor cylinder are analyzed using finite element method(FEM, ANSYS Inc., U.S.A ) based on the safety assessment, and the cylinder is designed for installing scheme. The result of ANSYS analysis shows that the stress unstable positions are nearby both ends of the cylinder. The results of analysis are shown that the designing stresses are not beyond the allow able ones. So the designing parameters can possess sufficient reliability, and the design scheme can completely satisfy the strength requirement. Certainty of the stress could offered the valuable instruction for the application of the equipment on industrial scale-up.

The Comparison of the Variety of Finite Element Method (FEM) Based on the Arm of Mining Excavator

2014 ◽  
Vol 697 ◽  
pp. 173-176
Author(s):  
Hao Zou ◽  
Ming Zhang ◽  
Jia Jun Ren
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Material Properties ◽  
Element Model ◽  
Analysis Method ◽  
Ansys Software ◽  
Element Analysis ◽  
Ansys Analysis ◽  
The Finite Element Analysis ◽  
The Finite Element Model

In this paper, authors made contrast with the three finite element methods in analysis accuracy and usability .Those are all based on the structural analysis of mining excavator arm. The first fem is using UG solid modeling capabilities to create model .The finite element model is generated by UG_ANSYS, including setting the loads of material properties and boundary conditions ,also loading work. The process is called preprocessing completely .Then export a“. inp” file,after that, imported that file directly into ANSYS software for solving. The second one is to import solid mode created in UG into ANSYS software directly ,then take pretreatment and solution accordingly.The last one is using UG modeling and UG NX NASTRAN (the finite element analysis function) for structure analysis. It is concluded that using UG completely pretreatment of ANSYS analysis method and UG NX NASTRAN method feel more convenient to operate it with the high analyze accuracy,with the two methods , designers can modify mining mechanical arm weak positions more easily.In turns,they can improve the designing level of physical prototyping.

Finite Element Analysis of Anchor Assembly in Cable Hydraulic Lift

2012 ◽  
Vol 251 ◽  
pp. 180-184
Author(s):  
Jian Qin ◽  
Yu Ying Zou ◽  
Qian Miao
Keyword(s):  
Finite Element Method ◽  
Finite Element Analysis ◽  
Finite Element ◽  
Safety Assessment ◽  
Numerical Results ◽  
Hydraulic Lift ◽  
Element Analysis ◽  
Design Scheme ◽  
Mechanical Models ◽  
Element Method

The anchor assembly is the important part of the hydraulic lift, the stresses of which under load are analyzed using finite element method. The 3D mechanical models of anchor assembly are created with different sizes. Several important positions are investigated around the holes of upper anchor and these stresses are compared between different cases. Based upon the numerical results, the safety assessment of the anchor assembly is conducted and a reasonable design scheme is proposed.

Towards Predicting Relative Belt Edge Endurance With the Finite Element Method

1990 ◽  
Vol 18 (4) ◽  
pp. 216-235 ◽  
Author(s):  
J. De Eskinazi ◽  
K. Ishihara ◽  
H. Volk ◽  
T. C. Warholic
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Three Dimensional ◽  
The Finite Element Method ◽  
Shear Deformations ◽  
Element Analysis ◽  
Vertical Loading ◽  
Predicted Values ◽  
Element Method

Abstract The paper describes the intention of the authors to determine whether it is possible to predict relative belt edge endurance for radial passenger car tires using the finite element method. Three groups of tires with different belt edge configurations were tested on a fleet test in an attempt to validate predictions from the finite element results. A two-dimensional, axisymmetric finite element analysis was first used to determine if the results from such an analysis, with emphasis on the shear deformations between the belts, could be used to predict a relative ranking for belt edge endurance. It is shown that such an analysis can lead to erroneous conclusions. A three-dimensional analysis in which tires are modeled under free rotation and static vertical loading was performed next. This approach resulted in an improvement in the quality of the correlations. The differences in the predicted values of various stress analysis parameters for the three belt edge configurations are studied and their implication on predicting belt edge endurance is discussed.

Tire Cornering Simulation Using an Explicit Finite Element Analysis Code

1998 ◽  
Vol 26 (2) ◽  
pp. 109-119 ◽  
Author(s):  
M. Koishi ◽  
K. Kabe ◽  
M. Shiratori
Keyword(s):  
Finite Element Method ◽  
Finite Element Analysis ◽  
Finite Element ◽  
Test System ◽  
Experimental Results ◽  
The Finite Element Method ◽  
Element Analysis ◽  
Explicit Finite Element ◽  
Explicit Finite Element Analysis ◽  
Element Method

Abstract The finite element method has been used widely in tire engineering. Most tire simulations using the finite element method are static analyses, because tires are very complex nonlinear structures. Recently, transient phenomena have been studied with explicit finite element analysis codes. In this paper, the authors demonstrate the feasibility of tire cornering simulation using an explicit finite element code, PAM-SHOCK. First, we propose the cornering simulation using the explicit finite element analysis code. To demonstrate the efficiency of the proposed simulation, computed cornering forces for a 175SR14 tire are compared with experimental results from an MTS Flat-Trac Tire Test System. The computed cornering forces agree well with experimental results. After that, parametric studies are conducted by using the proposed simulation.

scholarly journals Shape Sensing of a Complex Aeronautical Structure with Inverse Finite Element Method

Sensors ◽  
2021 ◽  
Vol 21 (4) ◽  
pp. 1388
Author(s):  
Daniele Oboe ◽  
Luca Colombo ◽  
Claudio Sbarufatti ◽  
Marco Giglio
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Boundary Conditions ◽  
Strain Field ◽  
Element Analysis ◽  
Inverse Finite Element Method ◽  
Shape Sensing ◽  
Definition Of ◽  
High Level ◽  
Element Method

The inverse Finite Element Method (iFEM) is receiving more attention for shape sensing due to its independence from the material properties and the external load. However, a proper definition of the model geometry with its boundary conditions is required, together with the acquisition of the structure’s strain field with optimized sensor networks. The iFEM model definition is not trivial in the case of complex structures, in particular, if sensors are not applied on the whole structure allowing just a partial definition of the input strain field. To overcome this issue, this research proposes a simplified iFEM model in which the geometrical complexity is reduced and boundary conditions are tuned with the superimposition of the effects to behave as the real structure. The procedure is assessed for a complex aeronautical structure, where the reference displacement field is first computed in a numerical framework with input strains coming from a direct finite element analysis, confirming the effectiveness of the iFEM based on a simplified geometry. Finally, the model is fed with experimentally acquired strain measurements and the performance of the method is assessed in presence of a high level of uncertainty.

Analysis of Hydroelectric Unit’s Upper Bracket Based on Test and FEM

2014 ◽  
Vol 721 ◽  
pp. 131-134
Author(s):  
Mi Mi Xia ◽  
Yong Gang Li
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Element Model ◽  
The Finite Element Method ◽  
Ansys Software ◽  
Element Analysis ◽  
Hydroelectric Unit ◽  
The Finite Element Analysis ◽  
Strain Rosette ◽  
The Finite Element Model

To research the load upper bracket of Francis hydroelectric unit, then established the finite-element model, and analyzed the structure stress of 7 operating condition points with the ANSYS software. By the strain rosette test, acquired the data of stress-strain in the area of stress concentration of the upper bracket. The inaccuracy was considered below 5% by analyzing the contradistinction between the finite-element analysis and the test, and match the engineering precision and the test was reliable. The finite-element method could be used to judge the stress of the upper bracket, and it could provide reference for the Structural optimization and improvement too.

Elastic Shakedown in Pressure Vessel Components Under Non-Proportional Loading

2002 ◽  
Author(s):  
Martin Muscat ◽  
Robert Hamilton
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Pressure Vessel ◽  
Proportional Loading ◽  
Linear Superposition ◽  
Element Analysis ◽  
Mechanical Loads ◽  
Bound Theorem ◽  
Square Plate ◽  
Elastic Shakedown

Bounding techniques for calculating shakedown loads are of great importance in design since this eliminates the need for performing full elasto-plastic cyclic loading analyses. The classical Melan’s lower bound theorem is widely used for calculating shakedown loads of pressure vessel components under proportional loading. Polizzotto extended the Melan’s theorem to the case of non-proportional loading acting on a structure. This paper presents a finite element method, based on Polizzotto’s theorem, to estimate the elastic shakedown load for a structure subjected to a combination of steady and cyclic mechanical loads. This method, called non-linear superposition, is then applied to investigate the shakedown behaviour of a pressure vessel component — a nozzle/cylinder intersection and that of a biaxially loaded square plate with a central hole. Results obtained for both problems are compared with those available in the literature and are verified by means of cyclic elasto-plastic finite element analysis.

Sign in / Sign up

Export Citation Format

Share Document