Numerical Analysis of RC Shear Walls under Cyclic Loading by PERFORM-3D

2011 ◽  
Vol 250-253 ◽  
pp. 2253-2257 ◽  
Author(s):  
Huan Jun Jiang ◽  
Lao Er Liu
Keyword(s):  
Reinforced Concrete ◽  
Numerical Analysis ◽  
Cyclic Loading ◽  
Constitutive Models ◽  
Nonlinear Behavior ◽  
Shear Walls ◽  
Shear Wall ◽  
Engineering Practice ◽  
Macroscopic Models ◽  
Wall Element

For engineering practice purpose, the macroscopic model capable of simulating the main characteristics of nonlinear behavior is desirable to reduce computational efforts in nonlinear structural analysis. Several different types of macroscopic models for shear walls have been developed. The shear wall element used in the commercial program PERFORM-3D is one types of macroscopic models for reinforced concrete shear walls. The application of PERFORM-3D in the nonlinear static analysis of reinforced concrete shear walls is introduced in this study. The selection of constitutive models and the determination of related parameters of the constituent material are presented in detail. The applicability of the shear wall element is verified by numerical simulation on three reinforced concrete shear wall specimens under cyclic loading. The comparison between the numerical analysis and test results leads to the conclusion that the shear wall element with appropriate constitutive models can capture the nonlinear behavior of reinforced concrete shear wall well and be conveniently applied in engineering practice.

scholarly journals Numerical Simulation of Reinforced Concrete Shear Walls Using Force-Based Fiber Element Method

2021 ◽  
Author(s):  
MUHAMMET KARATON ◽  
Ömer Faruk Osmanlı ◽  
Mehmet Eren GÜLŞAN
Keyword(s):  
Reinforced Concrete ◽  
Numerical Analysis ◽  
Shear Walls ◽  
Shear Wall ◽  
Roof Displacement ◽  
Experimental Results ◽  
Wall Structures ◽  
Longitudinal Length ◽  
Fiber Element ◽  
Element Method

Abstract Reinforced concrete shear walls are the structural elements that considerably increase the seismic performance of buildings. Fiber elements and fiber-spring elements are used for the modeling of the inelastic behavior of these elements. The Fiber Element Method provides a certain amount of accuracy for the modeling of reinforced concrete shear walls. However, the studies related to this method are still in progress. In this study, the efficiency of the force-based Fiber Element Method is investigated for different damping ratios and different damping types that used in the structural damping for reinforced concrete shear wall structures. Two shear wall structures that subjected to seismic loads are used for the comparison of numerical analysis and experimental results. The comparisons are achieved according to the absolute maximum values of the overturning moment, the base shear force, and the roof displacement. Rayleigh damping and stiffness-proportional damping types for the damping ratios that vary between 2-3% provide better results than mass-proportional damping. Additionally, the optimum number of fiber element for Rayleigh and stiffness-proportional damping types is determined for the optimum damping ratio that provides minimum differences between numerical analysis and experimental results. For these damping types, when the length of a fiber is smaller than 3% of the longitudinal length of the shear wall at the optimum damping ratios, the roof displacement differences between numerical analysis and experimental results are less than 2.5%.

Study on Seismic Behavior of the L-Shape Steel Reinforced Concrete Short-Pier Shear Wall with Different Concrete Strength

2013 ◽  
Vol 353-356 ◽  
pp. 1990-1999
Author(s):  
Yi Sheng Su ◽  
Er Cong Meng ◽  
Zu Lin Xiao ◽  
Yun Dong Pi ◽  
Yi Bin Yang
Keyword(s):  
Numerical Simulation ◽  
Reinforced Concrete ◽  
Seismic Performance ◽  
Seismic Behavior ◽  
Concrete Strength ◽  
Shear Walls ◽  
Shear Wall ◽  
Simulation Software ◽  
Steel Reinforced Concrete ◽  
Shrinkage Effect

In order to discuss the effect of different concrete strength on the seismic behavior of the L-shape steel reinforced concrete (SRC) short-pier shear wall , this article analyze three L-shape steel reinforced concrete short-pier shear walls of different concrete strength with the numerical simulation software ABAQUS, revealing the effects of concrete strength on the walls seismic behavior. The results of the study show that the concrete strength obviously influence the seismic performance. With the concrete strength grade rise, the bearing capacity of the shear wall becomes large, the ductility becomes low, the pinch shrinkage effect of the hysteresis loop becomes more obvious.

scholarly journals The shear strength of shear walls

1970 ◽  
Vol 3 (4) ◽  
pp. 148-162
Author(s):  
T. Paulay
Keyword(s):  
Shear Strength ◽  
Reinforced Concrete ◽  
Concrete Beams ◽  
Shear Walls ◽  
Shear Wall ◽  
Reinforced Concrete Beams ◽  
Research Projects ◽  
Deep Beams ◽  
Current Recommendation ◽  
The University

To enable a comparison between the shear strength of shear walls and that of reinforced concrete beams to be made, the behaviour of the latter is briefly reviewed. The findings of research projects, related to deep beams and the effects of repeated cyclic loading, are summarised. More detailed information on the shear strength of deep beams, tested at the University of Canterbury, is presented, Particular problems associated with four classes of typical shear walls of multi-storey structures are briefly highlighted. The current recommendation of the
 SEAOC code, as applied to shear walls, are critically examined and certain
anomalies, which may ensue from their interpretation, are illustrated. Areas of research, related to the full evaluation of reinforced concrete shear wall
 behaviour, are suggested. The paper concludes with a number of design recommendations which suggest themselves from this review.

Experimental Study on Shear Resistance of Precast RC Shear Walls with Novel Bundled Connections

2019 ◽  
Vol 13 (03n04) ◽  
pp. 1940002 ◽  
Author(s):  
Yao Chen ◽  
Qian Zhang ◽  
Jian Feng ◽  
Zhe Zhang
Keyword(s):  
Experimental Study ◽  
Reinforced Concrete ◽  
Shear Walls ◽  
Shear Wall ◽  
Shear Resistance ◽  
Lower Wall ◽  
Yield Load ◽  
Steel Bars ◽  
Wall Panels ◽  
Peak Value

This study presents shear resistance of precast reinforced concrete (RC) shear walls. A novel assembling method for upper and lower wall panels is proposed, whereas vertical steel bars are grouped into bundles and effectively connected in preformed holes. To evaluate the feasibility and shear resistance of such a connection method, three specimens of precast shear walls with different horizontal steel bars have been constructed and tested under monotonic loading while subjected to a constant vertical compression. The results show that cracks mainly appear under the line that connects the midpoint of tension side and the corner of the compression side. The weak section of these shear walls is at the top of the preformed holes, and through cracks do not appear at the bottom of walls. These innovative precast shear walls are reliable, and no rebar is pulled out or seriously slipped. The yield load of the shear wall is great, and the stage between yield and failure is satisfactory. The bearing capacity declines slowly after the peak value.

Theoretical Study on Steel Reinforced Concrete Hybrid Walls with Centered and Staggered Openings

2018 ◽  
Vol 763 ◽  
pp. 812-817
Author(s):  
Daniel Dan ◽  
Sorin Codrut Florut ◽  
Viorel Todea ◽  
Valeriu Stoian
Keyword(s):  
Reinforced Concrete ◽  
Lateral Displacement ◽  
Experimental Studies ◽  
Nonlinear Behavior ◽  
Shear Walls ◽  
Maximum Load ◽  
Experimental Program ◽  
Steel Reinforced Concrete ◽  
Lack Of Information ◽  
Hybrid Walls

Buildings placed in seismic areas are designed to simultaneously ensure strength, ductility and stiffness during earthquakes. In most cases the lateral resisting system is composed by shear walls. Lately for mid and high rise buildings the solution to use steel reinforced concrete shear walls, called hybrid walls, has been used. In most cases, the shear walls provided to limit the lateral displacement of the buildings, need to have openings due to architectural requirements. The existing theoretical and experimental studies presented in the literature refer to the behavior of solid/plain walls and a lack of information was identified for hybrid walls with openings. A theoretical and experimental program was developed at Politehnica University Timisoara, Romania with the aim to study the behavior of hybrid walls with centered and staggered openings. The current paper presents the results of nonlinear finite element analyses using ATENA package performed in order to assess the structural capabilities of the proposed experimental specimens with openings. Using the results obtained in one previous experimental program, consisting in tests on 1:3 scale steel-concrete composite elements, the paper presents a comparative study regarding the behavior of hybrid walls with openings versus solid walls. The study is focused on nonlinear behavior of elements with key parameters being evaluated, i.e. maximum load, deformation capacity and stiffens degradation.

scholarly journals Connection of infill panels in steel plate shear walls

1999 ◽  
Vol 26 (5) ◽  
pp. 549-563 ◽  
Author(s):  
A Schumacher ◽  
G Y Grondin ◽  
G L Kulak
Keyword(s):  
Finite Element ◽  
Cyclic Loading ◽  
Steel Plate ◽  
Shear Walls ◽  
Element Model ◽  
Shear Wall ◽  
Experimental Program ◽  
Steel Plate Shear Wall ◽  
Infill Panels ◽  
Welded Connection

The behaviour under cyclic loading of unstiffened steel plate shear wall panels at their connection to the bounding beams and columns was investigated on full-size panel corner details. Four different infill panel connection details were tested to examine and compare their response to quasi-static cyclic loading. The load versus displacement response of the details showed gradual and stable deterioration at higher loads. The formation of tears in the connection details did not result in a loss of load-carrying capacity. In addition to the experimental program, a finite element model was developed to model the behaviour of one of the infill plate corner connection specimens. Results from the analysis showed that the finite element method can be used to obtain the load versus displacement behaviour of an infill panel-to-boundary member arrangement.Key words: cyclic loading, hysteresis, shear wall, steel, welded connection.

Sign in / Sign up

Export Citation Format

Share Document