An Environmental Factors-Based Automatic Control System for Folding Arm Awning

2011 ◽  
Vol 422 ◽  
pp. 91-95
Author(s):  
Qing Yuan Zhu ◽  
Cheng Lu Wen ◽  
Wen Yi Xie ◽  
Xiao Hui Du
Keyword(s):  
Control System ◽  
Environmental Factors ◽  
Automatic Control ◽  
Automatic Control System ◽  
Control Mode ◽  
Single Chip ◽  
Control Logic ◽  
Environment Change ◽  
Sensor Unit ◽  
Prototype Test

This paper developed an automatic control system for folding arm awning based on environmental factors, which can overcome the disadvantages of the traditional awning of unitary control mode and low level of intelligence. The system consists of sensor unit, controller, drive motor and transmission mechanism. The sensor unit is used for testing light intensity, wind speed and rain, then an AT89S52 SCM single-chip microcomputer which is the core of the controller is applied to receive testing signal and send instructions to AC motor to realize the extending and withdrawing state of the awning according to the corresponding control logic. Meanwhile, this system is able to switch from automatic control to manual control so as to deal with power outage and other special situation and maintain operation of awning. The results of the prototype test show that this system is running steadily and can adjust the working condition of the awning in time according to the environment change. Compared with the current electric awning, the intelligent folding arm awning controlled according to environmental factors can achieve more energy conservation and environmental protection.

Design and Implementation of the PTZ Control System Based on MSP430 Single Chip Micyoco (SCM)

2013 ◽  
Vol 443 ◽  
pp. 318-321
Author(s):  
Zhai Hong
Keyword(s):  
Control System ◽  
Environmental Factors ◽  
Automatic Control ◽  
Automatic Control System ◽  
Environmental Control ◽  
Control Factor ◽  
Single Chip ◽  
Single Chip Microcomputer ◽  
Overall Design ◽  
Design And Implementation

This paper elaborates the control of environmental factors in the modern industry and agriculture, and according to the problem that the temperature and the humidity is hard to control automatically, this paper puts forward the design of the greenhouse automatic control system based on MSP430 single chip microcomputer. This design mainly introduces the overall design scheme of the automatic control system, and the use of the properties of various hardware based on MPS430, which mainly include temperature transmission sensor DS18B20 and the humidity transmission sensor CHR01. And then use the environmental control factor algorithm and numerical conversion fuzzy algorithm, so as to realize the temperature and humidity control system.

scholarly journals Automatic Control System of Vacuum Nano Coating Based on AVR Single Chip Microcomputer

2022 ◽  
Vol 16 ◽  
pp. 78-87
Author(s):  
Jinwen Li ◽  
Jie Zhang
Keyword(s):  
Control System ◽  
Response Time ◽  
Automatic Control ◽  
Automatic Control System ◽  
Data Encryption ◽  
Interference Signal ◽  
Single Chip ◽  
Single Chip Microcomputer ◽  
Environment Change ◽  
Nano Coating

Aiming at the problems of long response time and poor anti-interference ability of traditional vacuum nano-coating automatic control system, a design of vacuum nano-coating automatic control system based on AVR single-chip microcomputer is proposed. The use of ATmega128L microcontroller and Harvard architecture improves the parallel processing efficiency of the microcontroller. Select the transient voltage suppression diode to protect the power supply of the single-chip microcomputer, optimize the communication circuit, connect an external encryptor to realize the data encryption function, increase the filtering program and optimize the binary code processing function. Using PID (Packet Identifier) control algorithm, the design of nano-coating vacuum automatic control system based on AVR single-chip microcomputer is realized. Compared with the traditional system, when the simulation model and system parameters of the control system constructed in the environment change, the proposed system can be stabilized within 15 seconds, and can be stabilized for 13 seconds after the interference signal is added. The response time of the system is longer. Shorter, stronger anti-interference ability, more suitable for automatic control of vacuum nano-coating.

scholarly journals Design And Control System of Automatic Control System of Coal Flow on Belt Conveyor Installation

2021 ◽  
Vol 20 (2) ◽  
pp. 86
Author(s):  
Bayu Pranoto ◽  
Chandra Gunawan ◽  
Hilmi Iman Firmansyah ◽  
Hangga Wicaksono ◽  
Andhika Angger Nugraha ◽  
...  
Keyword(s):  
Control System ◽  
Automatic Control ◽  
Automatic Control System ◽  
Human Machine Interface ◽  
Belt Conveyor ◽  
Control Logic ◽  
Straight Blade ◽  
Flow Divider ◽  
Machine Interface ◽  
Coal Flow

In a power plant unit whose main fuel is coal, there is generally use a belt conveyor installation. This conveyor belt serves to supply coal from the crusher unit to the combustion chamber of the power generation unit. In this study, we discuss a case where the installation of a belt conveyor which was initially only one line was then made a new branch that supplies coal to other power generating units. Equitable capacity distribution and continuity of coal distribution are the main focus of this study. Therefore, a design of automatic control system of coal flow divider on belt conveyor installation was designed. The working principle of this coal flow splitting system is to control the movement of the straight blade plough that directs the flow of coal to each unit at the certain time and continuously. Straight blade plough in the form of steel metal plate with a thickness of about 10 millimeters in which one end is connected to the end of the pneumatic cylinder. Automatic control system of coal flow divider in belt conveyor installation designed using CX-Programmer and CX-Designer applications. CX-Programmer serves to create automatic control logic concepts. While the CX-designer functions to create a Human Machine Interface (HMI), making it easier for operators to control the course of the coal supply process. The results of this study are in the form of control logic lines that can be applied to Programmable Logic Control (PLC) device and Human Machine Interface (HMI) equipment.

The Design of Automatic Control System for Large-Scale Aluminum Ring Rolling Mill

2012 ◽  
Vol 443-444 ◽  
pp. 974-979 ◽  
Author(s):  
Zi Hong Zhang ◽  
Hong Quan Zhang
Keyword(s):  
Control System ◽  
Automatic Control ◽  
High Precision ◽  
Automatic Control System ◽  
Rolling Mill ◽  
Large Scale ◽  
Ring Rolling ◽  
Control Logic ◽  
The Core ◽  
Ring Rolling Mill

Large –scale aluminum ring rolling mill is the core of ring rolling ,it is required for automatic control system to realize high precision and fast response.Based on the configuration of the equipment, characteristics of ring rolling and the process flow of production, the paper not only studied the Control principle of the automatic control system but also designed the control scheme of software and hardware. The core of system is PLC. The system can effectively control hydraulic system, measurement system, feeding servo system by the cooperation of PLC and human machine interface (HMI). It realized fully automatic operation under the ring rolling mill close-loop control. The high precision control and safe operation can be realized by using multi network communication technology and advanced full AC drive system .The rolling quality of rings is high. The design accords with the control logic requirements of rolling process control. The control system is smooth and reliable.

scholarly journals Improving thermal control efficiency of solar energy utilization based on at series single-chip microcomputer

2021 ◽  
Vol 25 (4 Part B) ◽  
pp. 2845-2852
Author(s):  
Wenbao Geng ◽  
Min Lei
Keyword(s):  
Control System ◽  
Solar Energy ◽  
Automatic Control ◽  
Automatic Control System ◽  
Thermal Control ◽  
Energy Utilization ◽  
Utilization Efficiency ◽  
Single Chip ◽  
Single Chip Microcomputer ◽  
Air Heating

The thesis researched and designed a solar air heating automatic control system. The system is based on the AT89C52 single-chip microcomputer. The system has automatic tracking function control of the blade heat collector, winter and summer function conversion, and active and passive function conversion functions. The advantage of this system is that it can set the operating parameters of the system as required and can typically work following the set mode under complicated weather changes. Through experimental research, it is found that the solar air heating automatic control system can effectively improve the utilization efficiency of solar energy.

Investigation of the stability of periodic motions in a nonlinear automatic control system based on the fast fourier transform

2003 ◽  
Vol 3 ◽  
pp. 297-307
Author(s):  
V.V. Denisov
Keyword(s):  
Fourier Transform ◽  
Control System ◽  
Automatic Control ◽  
Fast Fourier Transform ◽  
Automatic Control System ◽  
Resonance Phenomenon ◽  
Periodic Motions ◽  
Multiply Connected ◽  
Non Linear ◽  
The Stability

An approach to the study of the stability of non-linear multiply connected systems of automatic control by means of a fast Fourier transform and the resonance phenomenon is considered.

Sign in / Sign up

Export Citation Format

Share Document