A Study on Hardened State Properties of SCC Using Fly Ash and Blended Fine Aggregate

2012 ◽  
Vol 587 ◽  
pp. 21-25 ◽  
Author(s):  
Brabha H. Nagaratnam ◽  
M.E. Rahman ◽  
M.A. Mannan
Keyword(s):  
Fly Ash ◽  
Apparent Volume ◽  
Strength Properties ◽  
Fine Aggregate ◽  
Durability Properties ◽  
Medium Strength ◽  
Hardened State ◽  
Powder Content ◽  
Class F Fly Ash ◽  
Strength And Durability

The aim of this research is to investigate hardened state properties of Self Compacting Concrete (SCC) containing low calcium based fly ash. The mixtures were prepared using various proportions of Class F fly ash ranging from 0% to 30% cement replacement. Water to powder ratio is 0.38 – 0.39 and powder content was kept constant at 540 kg/m3. Properties investigated were strength properties (compressive strength and splitting tensile strength), and durability properties (complete immersion water absorption, apparent volume of permeable voids (AVPV), sorptivity, and RCIPT tests. These tests were done at various days. Results showed that fly ash replacement of up to 30% gave acceptable strength and durability properties for medium strength SCC.

scholarly journals Strength Assessment on Geopolymer Concrete using Ceramic Waste Powder and M-Sand

2020 ◽  
Vol 10 (1) ◽  
pp. 95-100
Keyword(s):  
Fly Ash ◽  
Ceramic Powder ◽  
Source Material ◽  
Fine Aggregate ◽  
Geopolymer Concrete ◽  
Polypropylene Fibres ◽  
Strength Assessment ◽  
Ceramic Waste ◽  
Durability Properties ◽  
Strength And Durability

The use of abundantly available wastes such as Fly ash and ceramic powder in construction industry in the form of geopolymer concrete turns out to be the search of a very promising building material for a sustainable future[15].This study has been undertaken to investigate the strength and durability properties of geopolymer concrete by adding ceramic powder in different percentage as source material in addition with flyash[16]. All investigations are mainly focused towards geopolymer concrete mainly with flyash as source material. In this study, ceramic waste powder is added since it is also one of the major waste material as flyash. Nowadays, almost all the construction are carried out with ceramic products which results with more ceramic waste powder. Thus this work focused to utilize this waste powder into geopolymer concrete. Characteristic strength and primary durability properties are carried out by adding ceramic powder with 50%,40% and30% with fly ash. Thus this paper focuses on varying the proportions of fly ash and ceramic waste powder (50:50, 60:40, 70:30) in geopolymer concrete incorporating with polypropylene fibres in percentage of 0.5%,0.75% and 1% in volume of concrete to evaluate its strength and durability characteristics. The alkaline activator solution used is a mixture of 10 molar Sodium hydroxide and Sodium silicate in the ratio 1:3. Ambient curing condition is applied for the specimens. M-Sand is used instead of fine aggregate, since many literature reveals addition of M-Sand gains more strength in geopolymer Concrete.

scholarly journals Strength and Durability Characteristics of Cement-lime Mortars with Fly Ash and Slag as Aggregate Substitutes

2021 ◽  
Author(s):  
Jacek Katzer ◽  
Paweł Kończalski
Keyword(s):  
Fly Ash ◽  
Strength Properties ◽  
Waste Materials ◽  
Future Research ◽  
Fine Aggregate ◽  
Natural Sand ◽  
Cement Mortars ◽  
Lime Mortars ◽  
The World ◽  
Strength And Durability

The global consumption of sand by the concrete industry has increased significantly over the years. Natural sand has become a desired commodity in numerous regions of the world. To protect both the existing resources of natural sand and utilize waste materials, drastic actions are urgently needed. The production of cement mortars, which are solely based on fine aggregate, is responsible for the large consumption of natural sand. In the described research program, we proposed to substitute 50 % of the natural sand in mortars with fly ash and slag. The strength properties and durability characteristics of the new mortars were tested. It was proved that mortars with fly ash and slag can be used for specific applications in civil engineering. Areas for future research associated with the mortars in question were also pointed out.  

Performance of Mortar Grouts Incorporating Rice Husk Ash and Fly Ash

2019 ◽  
pp. 31-48
Keyword(s):  
Mechanical Properties ◽  
Compressive Strength ◽  
Fly Ash ◽  
Rice Husk ◽  
Rice Husk Ash ◽  
Apparent Volume ◽  
Partial Replacement ◽  
Hardened State ◽  
Strength And Durability ◽  
Penetration Tests

Chapter 3 is based on performance of mortar grouts incorporating rice husk ash (RHA) and fly ash (FA). Detailed experimental work was conducted to investigate the mechanical properties of mortar grout using RHA and FA as partial replacement of cement. This study investigated the compressive strength and durability of mortar grouts in their hardened state. Durability tests such as water absorption, apparent volume of permeable voids, sorptivity, and rapid chloride penetration tests are researched. Detailed results and discussion which focused on mechanical properties as well as durability of hardened state mortar grout are presented. It was confirmed that the inclusion of blended RHA and FA significantly improved the compressive strength of mortar grouts. The durability of mortar grout increased along with a longer curing time. Hence, RHA and FA can partially replace cement in the production of mortar grouts.

scholarly journals Strength and Durability Properties of Concrete with Partially Replaced Cement with Egg Shell Powder and Fine Aggregate with Quarry Dust

2019 ◽  
Vol 8 (10) ◽  
pp. 4585-4590
Keyword(s):  
Strength Properties ◽  
Partial Replacement ◽  
Fine Aggregate ◽  
Cement Ratio ◽  
Durability Properties ◽  
Egg Shell ◽  
Strength And Durability ◽  
Day By Day ◽  
Shell Powder ◽  
Quarry Dust

In present scenario concrete is highly consumed material in construction field due to its advantages, because of this the natural resources are depleting day by day at an alarming rate and there is an immediate need for finding alternate materials to the natural materials in concrete. In this paper an effort is made to find alternate partial replacement materials for cement and fine aggregate (FA). M40 grade concrete is adopted and the cement was replaced with egg shell powder with different percentages of 5%, 10% and 15%. The optimum percentage egg shell powder (ESP) is obtained at 10%. At optimum ESP the FA is replaced with Quarry Dust (QD) with percentages of 25%, 50%and75%. The maximum strength properties are obtained at 10% ESP and 50% QD and the concrete is also durable at 10% ESP and 50% QD with Water Cement Ratio is 0.38.

scholarly journals Performance of Recycled Concrete Aggregate in Self Compacting Concrete

2018 ◽  
Vol 7 (3.35) ◽  
pp. 1
Author(s):  
T. V. Arul Prakash ◽  
Dr. M. Natarajan ◽  
Dr. T. Senthil Vadivel ◽  
K. Vivek
Keyword(s):  
Fly Ash ◽  
Coarse Aggregate ◽  
Recycled Concrete ◽  
Concrete Aggregate ◽  
Recycled Concrete Aggregate ◽  
Self Compacting Concrete ◽  
Fly Ash Concrete ◽  
Local Construction ◽  
Class F Fly Ash ◽  
Strength And Durability

This article presents the influence of the Recycled Concrete Aggregate (RCA) on the mechanical properties of self-compacting fly ash concrete (M30 Grade). The RCA from local construction demolition site were employed as a replacement for natural coarse aggregate (0% - 30%) in self-compacting concrete (SCC). The Viscosity modifying material used in this study was Class F fly ash. The results indicate that recycled concrete aggregate can be replaced by an optimal 25% replacement percentage in the manufacture of SCC without significantly affecting strength and durability.  

Effects of Geopolymer Concrete Fly Ash Based on Alkali Silica Reaction (ASR)

2014 ◽  
Vol 567 ◽  
pp. 405-410 ◽  
Author(s):  
Muhd Fadhil Nuruddin ◽  
Siti Nooriza Abd. Razak
Keyword(s):  
Fly Ash ◽  
Chemical Reaction ◽  
Length Change ◽  
Alkali Silica Reaction ◽  
Geopolymer Concrete ◽  
Alkali Silica Reactivity ◽  
Mortar Bar ◽  
Class F Fly Ash ◽  
Strength And Durability ◽  
Standard Limit

Alkali Silica Reaction (ASR) is a chemical reaction which affects both strength and durability of concrete. ASR occurs due to a chemical reaction between alkali oxides presents in the cement paste and reactive silica in aggregate. This reaction could lead to the volume expansion, cracking, loss of strength and potential failure of the concrete. This research aimed to investigate the potential alkali silica reactivity on geopolymer concrete. Specimens were prepared using Class F fly ash as binder while sodium hydroxide and sodium silicate as alkaline activators. ASTM C1260 was adopted to determine potential alkali silica reactivity by measuring the length change of mortar bar as well as the decrease in compressive strength test. Results show that fly ash based geopolymer concrete is less vulnerable to ASR as the expansion of mortar bar is below the threshold of ASTM standard limit which is 0.10% of expansion. In term of strength, the geopolymer concrete did not reduced instead it increased. From the results, it has indicated that both tests ensure that the durability of geopolymer concrete is excellent and can withstand a long life span.

scholarly journals Mechanical and Durability Properties of Concrete Made with Used Foundry Sand as Fine Aggregate

2015 ◽  
Vol 2015 ◽  
pp. 1-11 ◽  
Author(s):  
G. Ganesh Prabhu ◽  
Jin Wook Bang ◽  
Byung Jae Lee ◽  
Jung Hwan Hyun ◽  
Yun Yong Kim
Keyword(s):  
Substitution Rate ◽  
International Standards ◽  
Fine Aggregate ◽  
Test Results ◽  
Natural Sand ◽  
Foundry Sand ◽  
Durability Properties ◽  
Concrete Mixtures ◽  
Concrete Production ◽  
Strength And Durability

In recent years, the construction industry has been faced with a decline in the availability of natural sand due to the growth of the industry. On the other hand, the metal casting industries are being forced to find ways to safely dispose of waste foundry sand (FS). With the aim of resolving both of these issues, an investigation was carried out on the reuse of waste FS as an alternative material to natural sand in concrete production, satisfied with relevant international standards. The physical and chemical properties of the FS were addressed. The influence of FS on the behaviour of concrete was evaluated through strength and durability properties. The test results revealed that compared to the concrete mixtures with a substitution rate of 30%, the control mixture had a strength value that was only 6.3% higher, and this enhancement is not particularly high. In a similar manner, the durability properties of the concrete mixtures containing FS up to 30% were relatively close to those of control mixture. From the test results, it is suggested that FS with a substitution rate of up to 30% can be effectively used in concrete production without affecting the strength and durability properties of the concrete.

Sign in / Sign up

Export Citation Format

Share Document