The Study of CaO-SiO2-B2O3-Al2O3-La2O3 Glass Ceramics as Sealant for Planar Intermediate Temperature Solid Oxide Fuel Cells

2013 ◽  
Vol 750-752 ◽  
pp. 558-561
Author(s):  
Jie Yu ◽  
Jian Jun Yang ◽  
Wen Hui Ma ◽  
Bo Yu ◽  
Rui Li ◽  
...  
Keyword(s):  
Glass Transition ◽  
Solid Oxide Fuel Cells ◽  
Glass Ceramics ◽  
Softening Temperature ◽  
Solid Oxide ◽  
Intermediate Temperature ◽  
Oxide Fuel ◽  
Melting Method ◽  
Calculation Results ◽  
Temperature Melting

CaO-SiO2-B2O3-Al2O3-La2O3 system sealants with different B/Si ratios of 0.38~0.82 were prepared by high-temperature melting method for intermediate temperature solid oxide fuel cell (ITSOFC). The glass transition temperature (Tg) and softening temperature (Ts) of the sealant were analyzed by TG-DSC. The complex phases of the sealants detected by XRD were consistent with the calculation results generally. The resistivity of the sealants tested by electrochemical workstation was above 65 kΩ·cm2, and the wetting angle was also calculated. The prepared sealants basically meet the sealing requirement for ITSOFC.

Research and Characterization of CaO-SiO2-B2O3-Al2O3-La2O3 Sealant with Different Alumina for ITSOFC

2013 ◽  
Vol 750-752 ◽  
pp. 562-565
Author(s):  
Biao Qian ◽  
Jian Jun Yang ◽  
Jie Yu ◽  
Wen Hui Ma ◽  
Bo Yu ◽  
...  
Keyword(s):  
Glass Transition ◽  
Transition Temperature ◽  
Anode Materials ◽  
Solid Oxide ◽  
Oxide Fuel ◽  
Crystal Temperature ◽  
Alumina Tube ◽  
Melting Method ◽  
Temperature Melting

The CaO-SiO2-B2O3-Al2O3-La2O3 sealants with different alumina contents were fabricated by high-temperature melting method for intermediate temperature solid oxide fuel cell (ITSOFC). The glass transition temperature (Tg) and crystal temperature (Ts) of the sealant with different alumina content was characterized by TG-DSC. And the composition phase of the sealant was detected by XRD. The resistivity of sealant tested by electrochemical workstation was higher than 22 kΩ·cm2, which met the requirement for ITSOFC. Through the detecting of the wetting angle, the adhesion of sealant and anode materials was very good, and the single cell sealed with alumina tube successfully.

The performance of intermediate temperature solid oxide fuel cells with sputter deposited La1-xSrxCoO3 interlayer

2021 ◽  
Author(s):  
A. A. Solovyev ◽  
A. V. Shipilova ◽  
I. V. Ionov ◽  
E. A. Smolyanskiy ◽  
A. V. Nikonov ◽  
...  
Keyword(s):  
Fuel Cells ◽  
Solid Oxide Fuel Cells ◽  
Solid Oxide ◽  
Intermediate Temperature ◽  
Oxide Fuel ◽  
Sputter Deposited

Gadolinium doped ceria nanostructured oxide for intermediate temperature solid oxide fuel cells

2021 ◽  
pp. 160444
Author(s):  
S.U. Costilla-Aguilar ◽  
M.I. Pech-Canul ◽  
M.J. Escudero ◽  
R.F. Cienfuegos-Pelaes ◽  
J.A. Aguilar-Martínez
Keyword(s):  
Fuel Cells ◽  
Solid Oxide Fuel Cells ◽  
Solid Oxide ◽  
Intermediate Temperature ◽  
Doped Ceria ◽  
Oxide Fuel ◽  
Nanostructured Oxide ◽  
Gadolinium Doped Ceria

Highly active and CO2-tolerant Sr2Fe1.3Ga0.2Mo0.5O6-δ cathode for intermediate-temperature solid oxide fuel cells

2020 ◽  
Vol 450 ◽  
pp. 227722 ◽  
Author(s):  
Chunming Xu ◽  
Kening Sun ◽  
Xiaoxia Yang ◽  
Minjian Ma ◽  
Rongzheng Ren ◽  
...  
Keyword(s):  
Fuel Cells ◽  
Solid Oxide Fuel Cells ◽  
Solid Oxide ◽  
Intermediate Temperature ◽  
Oxide Fuel ◽  
Highly Active
Sign in / Sign up

Export Citation Format

Share Document