Design of Deployable Antenna Based on SMPC

2013 ◽  
Vol 753-755 ◽  
pp. 1457-1461 ◽  
Author(s):  
Bao Xian Jia ◽  
Qing Cheng ◽  
Wen Feng Bian
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Cross Section ◽  
Deformation Mechanism ◽  
Shell Structure ◽  
Light Weight ◽  
Central Angle ◽  
Element Analysis ◽  
Laminated Shell ◽  
Large Size

In order to get the deployable antenna with light weight but large size and high stiffness, this study investigated SMPC self-deployable driver mechanism based on the deformation mechanism of SMPC, and designed the SMPC space deployable antenna. The laminated shell structure with two pieces of back-to-back configuration was analyzed. Finite element analysis revealed that the reasonable central angle of the laminated shell cross-section was 90°. The ends fixing structure of the SMPC hinge was given. The function and structure of the hoop truss deployable antenna were designed to meet the functional and accuracy requirements.

Finite Element Analysis for the Collapse Accident of a 110kV Transmission Tower

2014 ◽  
Vol 986-987 ◽  
pp. 927-930
Author(s):  
Yi Zhu ◽  
Bo Li ◽  
Hao Wang ◽  
Kun Li
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Cross Section ◽  
Strong Wind ◽  
Transmission Tower ◽  
Element Analysis ◽  
Straight Line ◽  
The Finite Element Analysis

Put the finite element analysis of line tower coupling modeling to the collapse of a 110 kV line straight-line tower, study the effect of strong wind on transmission tower and wire. The results show that under the action of strong wind, the material specification selected by the part of the rods on the type of tower is lower, cross section is smaller, the principal material of tower will be instable and flexional under the compression, resulting in tower collapsed.

Three Approaches for Managing Stiffness in Origami-Inspired Mechanisms

2018 ◽  
Author(s):  
Alden Yellowhorse ◽  
Larry L. Howell
Keyword(s):  
Experimental Data ◽  
Finite Element Analysis ◽  
Finite Element ◽  
Engineering Applications ◽  
Element Analysis ◽  
Advantages And Disadvantages ◽  
Large Size ◽  
Selection For

Ensuring that deployable mechanisms are sufficiently rigid is a major challenge due to their large size relative to their mass. This paper examines three basic types of stiffener that can be applied to light, origami-inspired structures to manage their stiffness. These stiffeners are modeled analytically to enable prediction and optimization of their behavior. The results obtained from this analysis are compared to results from a finite-element analysis and experimental data. After verifying these models, the advantages and disadvantages of each stiffener type are considered. This comparison will facilitate stiffener selection for future engineering applications.

scholarly journals Investigation of the Prediction Accuracy of a Finite Element Analysis Model for the Coating Thickness in Cross-Wedge Rolled Coaxial Hybrid Parts

Materials ◽  
2019 ◽  
Vol 12 (18) ◽  
pp. 2969 ◽  
Author(s):  
Jagodzinski ◽  
Kruse ◽  
Barroi ◽  
Mildebrath ◽  
Langner ◽  
...  
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Cross Section ◽  
Coating Thickness ◽  
Wedge Angle ◽  
Research Centre ◽  
Cross Wedge Rolling ◽  
Element Analysis ◽  
Hybrid Parts ◽  
Experimental Trials

The Collaborative Research Centre 1153 (CRC 1153) “Process chain for the production of hybrid high-performance components through tailored forming” aims to develop new process chains for the production of hybrid bulk components using joined semi-finished workpieces. The subproject B1 investigates the formability of hybrid parts using cross-wedge rolling. This study investigates the reduction of the coating thickness of coaxially arranged semi-finished hybrid parts through cross-wedge rolling. The investigated parts are made of two steels (1.0460 and 1.4718) via laser cladding with hot-wire. The rolling process is designed by finite element (FE)-simulations and later experimentally investigated. Research priorities include investigations of the difference in the coating thickness of the laser cladded 1.4718 before and after cross-wedge rolling depending on the wedge angle β, cross-section reduction ∆A, and the forming speed ν. Also, the simulations and the experimental trials are compared to verify the possibility of predicting the thickness via finite element analysis (FEA). The main finding was the ability to describe the forming behavior of coaxially arranged hybrid parts at a cross-section reduction of 20% using FEA. For a cross-section reduction of 70% the results showed a larger deviation between simulation and experimental trials. The deviations were between 0.8% and 26.2%.

Fatigue Evaluation of Flat Steel Box Girders with Closed Stiffeners of Large-Span Suspension Bridges under Different Heavy Trucks

2011 ◽  
Vol 147 ◽  
pp. 157-160 ◽  
Author(s):  
Yong Zeng ◽  
Hong Mei Tan
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Cross Section ◽  
Suspension Bridges ◽  
Box Girders ◽  
Element Analysis ◽  
Box Girder ◽  
Fatigue Assessment ◽  
Steel Box Girder ◽  
Flat Steel

Due to its outstanding aerodynamic shape and light weight, the trapezoidal cross-section flat steel box girder with orthotropic decks and thin-walled longitudinal stiffeners of trapezoidal cross section are widely used in long-span suspension bridges in the world. However, because of the geometrical characteristics and the relative flexibility of their components, these structures may be quite susceptible to traffic loadings that fatigue cracks tend to appear in these structures. In this paper, Jiangyin Bridge is used as a case study to investigate the fatigue performance of the steel girders of suspension bridge Jiangyin Bridge is the second longest bridge in China, which has the main span of 1385m. The stress analysis of steel box girders is firstly carried out based on the analysis of fatigue life. Fatigue assessment method is proposed on the basis of in-situ measurement data combined with finite element analysis. A complete fatigue assessment is made in this paper. Key words: flat steel box girder; orthotropic decks; finite element analysis; fatigue assessment

scholarly journals The Generalized Untwist Problem of Rotating Blades: A Coupled Aeroelastic Formulation

1994 ◽  
Author(s):  
Gao-Lian Liu
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Cross Section ◽  
Theoretical Basis ◽  
Variational Principles ◽  
Element Analysis ◽  
Rotating Blades ◽  
Section Shape ◽  
The Finite Element Analysis ◽  
Elastic Distortion

The untwist of rotating blades in turbomachines treated so far in the literatare simply as a pure elasticity problem is generalized and formulated rigorously as a problem of aeroelasticity by variational principles (VPs) and generalized VP (GVP). It takes into account not only the centrifugal force, but also the aeroelastic interaction between blades and the flow as well as the elastic distortion of the cross section shape of blades, assuming the material to be linearly elastic but nonisotropic. Thus, a new rigorous theoretical basis for the finite element analysis of blade untwist in turbomachine design is provided.

An Experimental and Numerical Investigation of the Effect of Axial Thermal Gradients in Flexible Pipes

2017 ◽  
Author(s):  
Dag Fergestad ◽  
Frank Klæbo ◽  
Jan Muren ◽  
Pål Hylland ◽  
Tom Are Grøv ◽  
...  
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Cross Section ◽  
Measurement Techniques ◽  
Full Scale ◽  
Model Complexity ◽  
Flexible Pipe ◽  
Element Analysis ◽  
Flexible Pipes ◽  
Full Scale Testing

This paper discusses the structural challenges associated with high axial temperature gradients and the corresponding internal cross section forces. A representative flexible pipe section designed for high operational temperature has been subject to full scale testing with temperature profiles obtained by external heating and cooling. The test is providing detailed insight in onset and magnitude of relative layer movements and layer forces. As part of the full-scale testing, novel methods for temperature gradient testing of unbonded flexible pipes have been developed, along with layer force- and deflection-measurement techniques. The full-scale test set-up has been subject to numerous temperature cycles of various magnitudes, gradients, absolute temperatures, as well as tension cycling to investigate possible couplings to dynamics. Extensive use of finite element analysis has efficiently supported test planning, instrumentation and execution, as well as enabling increased understanding of the structural interaction within the unbonded flexible pipe cross section. When exploiting the problem by finite element analysis, key inputs will be correct material models for the polymeric layers, and as-built dimensions/thicknesses. Finding the balance between reasonable simplification and model complexity is also a challenge, where access to high quality full-scale tests and dissected pipes coming back from operation provides good support for these decisions. Considering the extensive full scale testing, supported by advanced finite element analysis, it is evident that increased attention will be needed to document reliable operation in the most demanding high temperature flexible pipe applications.

Sign in / Sign up

Export Citation Format

Share Document