Study on a Magnetic Deburring Method by the Application of the Plane Magnetic Abrasive Machining Process

2009 ◽  
Vol 76-78 ◽  
pp. 276-281 ◽  
Author(s):  
Yan Hua Zou ◽  
Takeo Shinmura ◽  
F. Wang
Keyword(s):  
Magnetic Particles ◽  
Constant Pressure ◽  
Machining Process ◽  
Magnetic Pole ◽  
Shape Accuracy ◽  
Magnetic Abrasive Finishing ◽  
Finishing Process ◽  
Abrasive Finishing ◽  
The Difference ◽  
Pole Surface

This research studies the influence　of constant pressure acting on the magnetic particles brush for the precision machining of planar and curved workpieces. In particular, it examined the effects of constant pressure on improving the formal accuracy of the workpiece. This process method, constant pressure is applied to the magnetic pole of a conventional magnetic brush, the constant pressure acted to the surface of the workpiece through the magnetic particle brush formed at the magnetic pole surface. The authors conducted a plane magnetic abrasive finishing experiment using both the conventional magnetic abrasive finishing process and the newly proposed constant-pressure magnetic abrasive finishing process to compare the deburring characteristics between the processes for removing burrs from holes drilled in brass plate workpieces. In this experiment, a brass disk with a drilled hole was used as a workpiece. As a result, the difference in finishing characteristics was clarified. The results showed that the burr can be removed by use of this new plane magnetic abrasive finishing process and it is more useful than the conventional magnetic brush for improving the shape accuracy of the workpiece.

scholarly journals Investigation on Finishing Characteristics of Magnetic Abrasive Finishing Process Using an Alternating Magnetic Field

Machines ◽  
2020 ◽  
Vol 8 (4) ◽  
pp. 75
Author(s):  
Huijun Xie ◽  
Yanhua Zou
Keyword(s):  
Magnetic Field ◽  
Magnetic Particles ◽  
Alternating Magnetic Field ◽  
Surface Finishing ◽  
Magnetic Cluster ◽  
Magnetic Abrasive Finishing ◽  
Square Wave ◽  
Finishing Process ◽  
Abrasive Finishing ◽  
The Difference

The magnetic abrasive finishing (MAF) process is an ultra-precision surface finishing process. In order to further improve the finishing efficiency and surface quality, the MAF process using an alternating magnetic field was proposed in the previous research, and it was proven that the alternating magnetic field has advantages compared with the static magnetic field. In order to further develop the process, this study investigated the effect on finishing characteristics when the alternating current waveform is a square wave. The difference between the fluctuation behavior of the magnetic cluster in two alternating magnetic fields (sine wave and square wave) is observed and analyzed. Through analysis, it can be concluded that the use of a square wave can make the magnetic cluster fluctuate faster, and as the size of the magnetic particles decreases, the difference between the magnetic cluster fluctuation speed of the two waveforms is greater. The experimental results show that the surface roughness of SUS304 stainless steel plate improves from 328 nm Ra to 14 nm Ra within 40 min.

Research on Tests of Magnetic Abrasive Finishing by Sintering Method

2011 ◽  
Vol 487 ◽  
pp. 273-277 ◽  
Author(s):  
G.B. Liao ◽  
M.M. Zhang ◽  
Y.J. Li ◽  
Z.Q. Liu ◽  
Yan Chen
Keyword(s):  
Magnetic Particles ◽  
Sintering Temperature ◽  
Abrasive Particle ◽  
Temperature Ratio ◽  
Magnetic Abrasive Finishing ◽  
Sintering Time ◽  
Finishing Process ◽  
Abrasive Finishing ◽  
Sintering Characteristics ◽  
Sintering Method

This paper mainly illustrates the magnetic abrasive finishing by sintering method and research on tests of magnetic abrasive finishing, analyses the effect of the sintering temperature, ratio of magnetic and abrasive particle size, sintering time and sintering characteristics of magnetic particles on magnetic abrasive during the finishing process, so as to achieve a better process and principle for magnetic abrasive finishing.

The Research of NC Magnetic Abrasive Finishing for Mould Parting Surface

2008 ◽  
Vol 389-390 ◽  
pp. 199-204
Author(s):  
Wei Qiang Gao ◽  
L. Meng ◽  
Qiu Sheng Yan ◽  
J.H. Song ◽  
T.X. Qiu
Keyword(s):  
Effective Control ◽  
Magnetic Pole ◽  
Workpiece Surface ◽  
Magnetic Abrasive Finishing ◽  
Finishing Process ◽  
Abrasive Finishing ◽  
Feeding Speed ◽  
Polishing Tool ◽  
The Relationship

In this paper, a new kind of NC magnetic abrasive finishing method with meshy polishing track to grind the parting face of mould was presented, and a new simple polishing tool using permanent magnet was also developed. Using the magnetic polishing tool, 3D NC polishing experiments was conducted on 2D parting surfaces. Experimental results reveal the relationship between several main parameters (rotational speed of magnetic pole, working gap, feeding speed and number of polishing times) and surface roughness. This study is expected to be helpful to improve the efficiency of finishing process, reduce worker's labor intensity, realize the effective control of finishing process and obtain fine quality of workpiece surface.

scholarly journals Modelling Of Wind Turbine Magnet for Magnetic Abrasive Finishing and Magnetic Field Assisted Abrasive Flow Machining Process

2021 ◽  
Author(s):  
Anant Bhardwaj ◽  
◽  
Krovvidi Srinivas ◽  
Rajiv Chaudhary ◽  
◽  
...  
Keyword(s):  
Magnetic Field ◽  
Wind Turbine ◽  
Cylindrical Specimen ◽  
Machining Process ◽  
Magnetic Abrasive Finishing ◽  
Abrasive Flow Machining ◽  
Finishing Process ◽  
Abrasive Finishing ◽  
Significant Process ◽  
Micro Level

Magnetic Abrasive Finishing is a significant process for finishing up to the micro-level. However, with the advancement of technology and hybrids like Viscoelastic magnetic abrasive Finishing and Magnetic abrasive Flow machining, it has become a nano finishing process. To improve the finishing process, the researchers have made a Model and tested the feasibility of the wind turbine magnet in Finishing. The Maxwell simulations were done for the cylindrical Specimen of Brass, Steel Aluminum. The simulations results were in accordance with the fact that the proposed wind turbine magnet may be used for the simulations.

Study on an Ultra-Precision Plane Magnetic Abrasive Finishing Process by Use of Alternating Magnetic Field

2013 ◽  
Vol 395-396 ◽  
pp. 985-989 ◽  
Author(s):  
Jin Zhong Wu ◽  
Yan Hua Zou
Keyword(s):  
Magnetic Field ◽  
Magnetic Particles ◽  
Water Soluble ◽  
Alternating Magnetic Field ◽  
Magnetic Flux Density ◽  
Magnetic Abrasive Finishing ◽  
Finishing Process ◽  
Abrasive Finishing ◽  
Ultra Precision ◽  
Surface Precision

In this paper, a new plane magnetic abrasive finishing process by using alternating magnetic field is proposed to improve the efficiency and surface precision. In alternating magnetic field, the forced direction of magnetic particles is changing. Therefore, magnetic particles could produce the up and down movement, which promote the scatter of magnetic particles , improve the roll of abrasive particles and enhance the utilization of abrasive. In order to know well the magnetic intensity distribution in processing area, measured the magnetic flux density. Finishing force is important to understand the mechanism of material removal, investigated to the finishing force and contrasted to the movement changes of magnetic particles in water-soluble finishing fluid and oily finishing fluid. A set of experimental devices have been designed to realize surface polishing on C2801 brass plate, the results proved the feasibility of this method, which can improve the workpiece surface quality.

Composite Tools Design for Electrolytic Magnetic Abrasive Finishing Process with FEM

2011 ◽  
Vol 325 ◽  
pp. 536-541
Author(s):  
G.Y. Liu ◽  
Zhong Ning Guo ◽  
Yuan Bo Li ◽  
J.W. Liu
Keyword(s):  
Field Model ◽  
Hollow Structure ◽  
Magnetic Pole ◽  
Workpiece Surface ◽  
Magnetic Abrasive Finishing ◽  
Composite Tool ◽  
Finishing Process ◽  
Abrasive Finishing ◽  
Magnetic Field Model ◽  
The Magnetic Field

In hybrid process of electrolytic magnetic abrasive finishing (EMAF), there are usually two structures on the tool design, separated or composited. This paper has been focused on the design of the composite tool. How to make electrolyte reach working area is a problem which should be solved for the EMAF process when the composite tool is used, therefore a hollow structure of magnetic pole has been put forward as one possible solution. To understand the effects of the structure parameters of the tool on the abrasive brush of EMAF, Finite Element Method (FEM) has been employed to establish the magnetic field model and analyze the distribution of magnetic induction on the workpiece surface and magnetic pole.

Improve the Micro-hardness of Single Point Incremental Forming Product Using Magnetic Abrasive Finishing

2020 ◽  
Vol 38 (8A) ◽  
pp. 1137-1142
Author(s):  
Baqer A. Ahmed ◽  
Saad K. Shather ◽  
Wisam K. Hamdan
Keyword(s):  
Vickers Hardness ◽  
Feed Rate ◽  
Incremental Forming ◽  
Single Point ◽  
Single Point Incremental Forming ◽  
Step Size ◽  
Coil Current ◽  
Magnetic Abrasive Finishing ◽  
Finishing Process ◽  
Abrasive Finishing

In this paper the Magnetic Abrasive Finishing (MAF) was utilized after Single Point Incremental Forming (SPIF) process as a combined finishing process. Firstly, the Single Point Incremental forming was form the truncated cone made from low carbon steel (1008-AISI) based on Z-level tool path then the magnetic abrasive finishing process was applied on the surface of the formed product. Box-Behnken design of experiment in Minitab 17 software was used in this study. The influences of different parameters (feed rate, machining step size, coil current and spindle speed) on change in Micro-Vickers hardness were studied. The maximum and minimum change in Micro-Vickers hardness that achieved from all the experiments were (40.4 and 1.1) respectively. The contribution percent of (feed rate, machining step size, coil current and spindle speed) were (7.1, 18.068, 17.376 and 37.894) % respectively. After MAF process all the micro surface cracks that generated on the workpiece surface was completely removed from the surface.

Sign in / Sign up

Export Citation Format

Share Document