Research on Anti-Interference of Measurement-Control Device in Substation Automation System

2013 ◽  
Vol 853 ◽  
pp. 302-305
Author(s):  
Qiang Gao ◽  
Jing Jing Du ◽  
Quan Yang Li
Keyword(s):  
Power System ◽  
Work Environment ◽  
Electromagnetic Interference ◽  
Electromagnetic Compatibility ◽  
Control Device ◽  
Automation System ◽  
Electromagnetic Environment ◽  
Measurement Control ◽  
Control Devices ◽  
Substation Automation

With the wide adoption of relay protection, power grid control and communication equipments in power system based on micro-circuit and micro-processor, the electromagnetic compatibility (EMC) of measurement-control devices has become an urgent and necessary consideration in substation automation system. In this paper, the electromagnetic environment and electromagnetic interference (EMI) problem in substation is presented, and several typical anti-interference methods regarding measurement-control devices are explored based on the analysis of unique characteristics and work environment of this kind of devices. Furthermore, anti-interference application in actual substation site is demonstrated, with the example of CSI-200 series devices.

Research on the Anti-Interference Tactics of Substation Automation Equipment

2013 ◽  
Vol 380-384 ◽  
pp. 739-742
Author(s):  
Xiao Jia Gu ◽  
Yun Liu ◽  
Yi Lin
Keyword(s):  
Electromagnetic Interference ◽  
Electromagnetic Environment ◽  
Automation Equipment ◽  
Substation Automation

The substation automation equipment are mostly in the bad electromagnetic environment, all kinds of interference can be through different pathways to automation equipment, have a lot of garbage information, may cause many serious problems. To solve the problems of interference is directly related to the safe and stable of substation operation. This paper puts forward several effective anti-interference measures from suppressing interference source, cutting off electromagnetic interference transmission and improving the anti-interference ability of the system.

Analysis of Electromagnetic Compatibility about Air-Power-Off of Aircraft Power System

2012 ◽  
Vol 503-504 ◽  
pp. 983-986 ◽  
Author(s):  
Guo Qiang Sun ◽  
Gang Guo ◽  
Yong Bo Yang ◽  
Dong Ping Yang ◽  
Jian Feng Zhang
Keyword(s):  
Power Systems ◽  
Electromagnetic Interference ◽  
Electromagnetic Compatibility ◽  
Electromagnetic Environment ◽  
Digital Controllers ◽  
Air Power ◽  
Input And Output ◽  
Ac Power ◽  
Signal Input ◽  
Airborne Electromagnetic

At present, main AC power systems of advanced fighters all apply digital controllers with microprocessors. The signal input and output circuits are vulnerable to the effects of electromagnetic interference, which may cause air-power-off fault. The paper analyzes the electromagnetic environment on the aircraft, discusses the airborne electromagnetic compatibility by comparing domestic and international contents and limitations of the electromagnetic standard. Furthermore, it proposes measures to resolve the electromagnetic compatibility

scholarly journals A Survey of Electromagnetic Influence on UAVs from an EHV Power Converter Stations and Possible Countermeasures

Electronics ◽  
2021 ◽  
Vol 10 (6) ◽  
pp. 701
Author(s):  
Yanchu Li ◽  
Qingqing Ding ◽  
Keyue Li ◽  
Stanimir Valtchev ◽  
Shufang Li ◽  
...  
Keyword(s):  
Electromagnetic Interference ◽  
Wide Spectrum ◽  
Electromagnetic Emission ◽  
Power Converter ◽  
Electromagnetic Environment ◽  
Communication Circuits ◽  
Electromagnetic Emissions ◽  
Surrounding Space ◽  
Extra High Voltage ◽  
The Impact

It is inevitable that high-intensity, wide-spectrum electromagnetic emissions are generated by the power electronic equipment of the Extra High Voltage (EHV) power converter station. The surveillance flight of Unmanned Aerial Vehicles (UAVs) is thus, situated in a complex electromagnetic environment. The ubiquitous electromagnetic interference demands higher electromagnetic protection requirements from the UAV construction and operation. This article is related to the UAVs patrol inspections of the power line in the vicinity of the EHV converter station. The article analyzes the electromagnetic interference characteristics of the converter station equipment in the surrounding space and the impact of the electromagnetic emission on the communication circuits of the UAV. The anti-electromagnetic interference countermeasures strive to eliminate or reduce the threats of electromagnetic emissions on the UAV’s hardware and its communication network.

scholarly journals Influence of Aircraft Power Electronics Processing on Backup VHF Radio Systems

Electronics ◽  
2021 ◽  
Vol 10 (7) ◽  
pp. 777
Author(s):  
Jan Leuchter ◽  
Radim Bloudicek ◽  
Jan Boril ◽  
Josef Bajer ◽  
Erik Blasch
Keyword(s):  
Power Electronics ◽  
Electromagnetic Interference ◽  
Communication Systems ◽  
Electromagnetic Compatibility ◽  
Intermediate Frequency ◽  
Radio Communication ◽  
Very High Frequency ◽  
Switching Power ◽  
Radio Systems ◽  
The Impact

The paper describes the influence of power electronics, energy processing, and emergency radio systems (ERS) immunity testing on onboard aircraft equipment and ground stations providing air traffic services. The implementation of next-generation power electronics introduces potential hazards for the safety and reliability of aircraft systems, especially the interferences from power electronics with high-power processing. The paper focuses on clearly identifying, experimentally verifying, and quantifiably measuring the effects of power electronics processing using switching modes versus the electromagnetic compatibility (EMC) of emergency radio systems with electromagnetic interference (EMI). EMI can be very critical when switching power radios utilize backup receivers, which are used as aircraft backup systems or airport last-resort systems. The switching power electronics process produces interfering electromagnetic energy to create problems with onboard aircraft radios or instrument landing system (ILS) avionics services. Analyses demonstrate significant threats and risks resulting from interferences between radio and power electronics in airborne systems. Results demonstrate the impact of interferences on intermediate-frequency processing, namely, for very high frequency (VHF) radios. The paper also describes the methodology of testing radio immunity against both weak and strong signals in accordance with recent aviation standards and guidance for military radio communication systems in the VHF band.

scholarly journals Reduction of Electromagnetic Interference Using ZnO-PCL Nanocomposites at Microwave Frequency

2015 ◽  
Vol 2015 ◽  
pp. 1-7 ◽  
Author(s):  
Abubakar Yakubu ◽  
Zulkifly Abbas ◽  
Nor Azowa Ibrahim ◽  
Ahmad Fahad
Keyword(s):  
Electromagnetic Interference ◽  
Electromagnetic Compatibility ◽  
Environmentally Friendly ◽  
Microwave Frequency ◽  
Absorption Properties ◽  
Radio Emissions ◽  
Surface Areas ◽  
Home Appliance ◽  
Coaxial Probe ◽  
Very High

In industrial equipment and home appliance applications, the electromagnetic compatibility compliance directive (ECCD) demands that electromagnetic interference side effects be eliminated or marginally minimized. The equipment must not disturb radio and telecommunication as well as other appliances. Additionally the ECCD also governs the immunity of such equipment to interference and seeks to ensure that this equipment is not disturbed by radio emissions when used as intended. Many types of absorbing materials are commercially available. However, many are expensive and not environmentally friendly. It is in the light of the above that we studied the electromagnetic absorption properties of ZnO-PCL nanocomposites prepared from cheap and abundant resources which are environmentally friendly (zinc and polycaprolactone). The test was carried out using a microstrip, open ended coaxial probe, and vector network analyzer. Amongst other findings, result showed that the ZnO-PCL nanocomposite has the capability of attenuating microwave frequency up to −18.2 dB due to their very high specific surface areas attributed to the nanofillers at 12 GHz.

Active Helmholtz Resonator With Positive Real Impedance

2006 ◽  
Vol 129 (1) ◽  
pp. 94-100 ◽  
Author(s):  
Jing Yuan
Keyword(s):  
Noise Control ◽  
Helmholtz Resonator ◽  
Control Device ◽  
Positive Real ◽  
Noise Field ◽  
Strictly Positive Real ◽  
Control Devices ◽  
Passive Noise ◽  
Active Resonator ◽  
Electronic Resonance

The impedance of a passive noise control device is strictly positive real, if the device is installed in noise fields with weak mean flows. Passive noise control devices are, therefore, more reliable than active ones. Active control may be applied to a Helmholtz resonator to introduce electronic resonance. It will affect the impedance Zact of the resonator. A controller may be designed such that (a) Zact is small and resistive at some tunable frequencies; and (b) Re{Zact}⩾0 in the entire frequency range of interest. If criterion (a) is satisfied, the active resonator can suppress duct noise at tunable frequencies. It is difficult to design a controller to satisfy criterion (b) because parameters of the controller depend on acoustic parameters of the noise field. A new method is proposed here to design an active controller to meet both criteria simultaneously. The satisfaction of criterion (b) implies a positive real Zact and a robust active resonator with respect to parameter variation in the noise field. Experimental results are presented to verify the performance of the active resonator.

ASSESSMENT OF THE ELECTROMAGNETIC ENVIRONMENT AND RADIO MONITORING OF SIGNAL PROPAGATION AND RECEPTION CONDITIONS

2020 ◽  
Author(s):  
С.В. КИЗИМА ◽  
Е.Г. РУДЕНКОВА
Keyword(s):  
Frequency Spectrum ◽  
Electromagnetic Compatibility ◽  
Measurement Data ◽  
Signal Propagation ◽  
Radio Sources ◽  
Electromagnetic Environment ◽  
Radio Monitoring ◽  
Radio Frequency Spectrum ◽  
Radio Signals ◽  
Problematic Situations

Рассматривается технология комплексного радиомониторинга излучений в заданной географической точке. Полученные результаты сопоставляются с разрешенными уровнями излучений. Технология направлена на решение задач оценки условий распространения и приема радиосигналов, планирования использования радиочастотного спектра (РЧС), выявления помех и других проблемных ситуаций, связанных с обеспечением электромагнитной совместимости ( ЭМС) действующих и перспективных радиосредств. The article describes the technology of complex radio monitoring of emissions from multiple radio sources. The measurement data are compared with the permitted emission levels. The application of the technology helps to assess the conditions for the propagation and reception of radio signals, planning the use of the radio frequency spectrum, identifying interference and other problematic situations related to electromagnetic compatibility of existing and promising radio facilities.

Sign in / Sign up

Export Citation Format

Share Document