The Control Method with Energy Saving of the Inflow Turbulence for Router Cooling Fan

2014 ◽  
Vol 886 ◽  
pp. 394-397 ◽  
Author(s):  
Ying Bo Xu ◽  
Xiao Dong Li
Keyword(s):  
Flow Field ◽  
Energy Saving ◽  
Turbulence Intensity ◽  
Control Method ◽  
Hot Wire ◽  
Mean Flow ◽  
Cooling Fan ◽  
Inflow Turbulence ◽  
The Mean

In this paper, the characteristics of the inflow turbulence intensity of a router cooling fan are studied experimentally. Screens with different parameters are designed to control the inflow turbulence intensity. The flow field is measured by hot-wire anemometer. The results show that the inflow turbulence intensity is closely connected with the parameters of the control screens. The inflow turbulence intensity can be significantly reduced when the screen with small meshes is used, while the mean flow is barely affected by the screen.

LDV Measurements of the Flow Field in the Nozzle Region of a Confined Double Annular Burner

2001 ◽  
Vol 123 (2) ◽  
pp. 228-236 ◽  
Author(s):  
Francois Schmitt ◽  
Birinchi K. Hazarika ◽  
Charles Hirsch
Keyword(s):  
Flow Field ◽  
Turbulent Flow ◽  
Turbulence Intensity ◽  
Meridional Plane ◽  
Reynolds Stresses ◽  
Mean Flow ◽  
Fine Grid ◽  
Contour Plots ◽  
The Mean ◽  
Grid Points

A database for the complex turbulent flow of a confined double annular burner in cold conditions is presented here. In the region close to the exit of the annular nozzles LDV measurements at 5515 grid points in the meridional plane were conducted. At each measurement position, validated data for 3000–16,000 particles were recorded, and the mean axial and radial velocities, axial and radial turbulence intensity and Reynolds stresses were computed. The resulting mean flow field is axisymmetric within an uncertainty of 2 percent. The contour plots of turbulent quantities on the fine grid, as well as the streamlines based on the mean flow field, are presented for the flow.

Experimental Investigation of a Tandem Cylinder System With a Yawed Upstream Cylinder

2013 ◽  
Vol 136 (1) ◽  
Author(s):  
Stephen J. Wilkins ◽  
Joseph W. Hall
Keyword(s):  
Experimental Investigation ◽  
Flow Field ◽  
Surface Pressure ◽  
Vortex Shedding ◽  
Flow Direction ◽  
Pressure Fluctuations ◽  
Hot Wire ◽  
Mean Flow ◽  
The Mean ◽  
Velocity Spectra

The unsteady flow field produced by a tandem cylinder system with the upstream cylinder yawed to the mean flow direction is investigated for upstream cylinder yaw angles from α=60 deg to α=90 deg. Multipoint fluctuating surface pressure and hot-wire measurements were conducted at various spanwise positions on both the upstream and downstream cylinders. The results indicate that yawing the front cylinder to the mean flow direction causes the pressure and velocity spectra on the upstream and downstream cylinders to become more broadband than for a regular tandem cylinder system, and reduces the magnitude of the peak associated with the vortex-shedding. However, spanwise correlation and coherence measurements indicate that the vortex-shedding is still present and was being obscured by the enhanced three-dimensionality that the upstream yawed cylinder caused. When the cylinder was yawed to α=60 deg, the pressure fluctuations became extremely broadband and exhibited shorter spanwise correlation.

scholarly journals Instability wave models for the near-field fluctuations of turbulent jets

2011 ◽  
Vol 689 ◽  
pp. 97-128 ◽  
Author(s):  
K. Gudmundsson ◽  
Tim Colonius
Keyword(s):  
Flow Field ◽  
Large Scale ◽  
Microphone Array ◽  
Near Field ◽  
Turbulent Jets ◽  
Instability Wave ◽  
Mean Flow ◽  
Velocity Fluctuations ◽  
The Mean ◽  
Scale Structures

AbstractPrevious work has shown that aspects of the evolution of large-scale structures, particularly in forced and transitional mixing layers and jets, can be described by linear and nonlinear stability theories. However, questions persist as to the choice of the basic (steady) flow field to perturb, and the extent to which disturbances in natural (unforced), initially turbulent jets may be modelled with the theory. For unforced jets, identification is made difficult by the lack of a phase reference that would permit a portion of the signal associated with the instability wave to be isolated from other, uncorrelated fluctuations. In this paper, we investigate the extent to which pressure and velocity fluctuations in subsonic, turbulent round jets can be described aslinearperturbations to the mean flow field. The disturbances are expanded about the experimentally measured jet mean flow field, and evolved using linear parabolized stability equations (PSE) that account, in an approximate way, for the weakly non-parallel jet mean flow field. We utilize data from an extensive microphone array that measures pressure fluctuations just outside the jet shear layer to show that, up to an unknown initial disturbance spectrum, the phase, wavelength, and amplitude envelope of convecting wavepackets agree well with PSE solutions at frequencies and azimuthal wavenumbers that can be accurately measured with the array. We next apply the proper orthogonal decomposition to near-field velocity fluctuations measured with particle image velocimetry, and show that the structure of the most energetic modes is also similar to eigenfunctions from the linear theory. Importantly, the amplitudes of the modes inferred from the velocity fluctuations are in reasonable agreement with those identified from the microphone array. The results therefore suggest that, to predict, with reasonable accuracy, the evolution of the largest-scale structures that comprise the most energetic portion of the turbulent spectrum of natural jets, nonlinear effects need only be indirectly accounted for by considering perturbations to the mean turbulent flow field, while neglecting any non-zero frequency disturbance interactions.

An Investigation of Flow Fields Over Multi-Element Aerofoils

2001 ◽  
Vol 124 (1) ◽  
pp. 154-165 ◽  
Author(s):  
S. R. Maddah ◽  
H. H. Bruun
Keyword(s):  
Flow Field ◽  
Computational Study ◽  
Separated Flow ◽  
Mean Flow ◽  
Model Configuration ◽  
Attached Flow ◽  
The Mean ◽  
Flap Deflection ◽  
Comparative Results ◽  
Lift And Drag

This paper presents results obtained from a combined experimental and computational study of the flow field over a multi-element aerofoil with and without an advanced slat. Detailed measurements of the mean flow and turbulent quantities over a multi-element aerofoil model in a wind tunnel have been carried out using stationary and flying hot-wire (FHW) probes. The model configuration which spans the test section 600mm×600mm, is made of three parts: 1) an advanced (heel-less) slat, 2) a NACA 4412 main aerofoil and 3) a NACA 4415 flap. The chord lengths of the elements were 38, 250 and 83 mm, respectively. The results were obtained at a chord Reynolds number of 3×105 and a free Mach number of less than 0.1. The variations in the flow field are explained with reference to three distinct flow field regimes: attached flow, intermittent separated flow, and separated flow. Initial comparative results are presented for the single main aerofoil and the main aerofoil with a nondeflected flap at angles of attacks of 5, 10, and 15 deg. This is followed by the results for the three-element aerofoil with emphasis on the slat performance at angles of attack α=10, 15, 20, and 25 deg. Results are discussed both for a nondeflected flap δf=0deg and a deflected flap δf=25deg. The measurements presented are combined with other related aerofoil measurements to explain the main interaction of the slat/main aerofoil and main aerofoil/flap both for nondeflected and deflected flap conditions. These results are linked to numerically calculated variations in lift and drag coefficients with angle of attack and flap deflection angle.

Measurement of the Mean Flow Field in a Smooth Rotating Channel With Coriolis and Buoyancy Effects

2017 ◽  
Author(s):  
Ruquan You ◽  
Haiwang Li ◽  
Zhi Tao ◽  
Kuan Wei
Keyword(s):  
Flow Field ◽  
Coriolis Force ◽  
Indium Tin Oxide ◽  
Buoyancy Force ◽  
Flow Direction ◽  
Density Ratio ◽  
Mean Flow ◽  
The Mean ◽  
Static Conditions ◽  
Rotating Channel

The mean flow field in a smooth rotating channel was measured by particle image velocimetry under the effect of buoyancy force. In the experiments, the Reynolds number, based on the channel hydraulic diameter (D) and the bulk mean velocity (Um), is 10000, and the rotation numbers are 0, 0.13, 0.26, 0.39, 0.52, respectively. The four channel walls are heated with Indium Tin Oxide (ITO) heater glass, making the density ratio (d.r.) about 0.1 and the maximum value of buoyancy number up to 0.27. The mean flow field was simulated on a 3D reconstruction at the position of 3.5<X/D<6.5, where X is along the mean flow direction. The effect of Coriolis force and buoyancy force on the mean flow was taken into consideration in the current work. The results show that the Coriolis force pushes the mean flow to the trailing side, making the asymmetry of the mean flow with that in the static conditions. On the leading surface, due to the effect of buoyancy force, the mean flow field changes considerably. Comparing with the case without buoyancy force, separated flow was captured by PIV on the leading side in the case with buoyancy force. More details of the flow field will be presented in this work.

Influences of Turbulence Boundary Conditions on RANS and URANS Simulations for an Inter-Turbine Duct

2020 ◽  
Author(s):  
Alessio Firrito ◽  
Yannick Bousquet ◽  
Nicolas Binder ◽  
Ludovic Pintat
Keyword(s):  
Flow Field ◽  
Boundary Conditions ◽  
Mean Flow ◽  
Time Resolved ◽  
Flow Solution ◽  
Low Pressure Turbine ◽  
Outlet Flow ◽  
Architecture Evolution ◽  
The Mean ◽  
Turbulence Length

Abstract In recent years, lot of turbine research is focused on the study and optimization of inter-turbine ducts, an aero-engine component for which the design is becoming more challenging due to the turbofan architecture evolution. Starting from the early design phase, the knowledge of the component performance and outlet flow pattern is crucial in the design of the low pressure turbine. To improve prediction, multi-row unsteady simulations are deployed. Unfortunately, some questions arise in the use of these simulations, among others the knowledge of the turbulent boundary conditions and the contribution of the unsteady simulations to the flow solution. In this paper steady and time resolved RANS simulations of a turning inter-turbine duct are investigated. Particularly, two questions are addressed. The first one is the influence of the turbulent quantities boundary conditions in the case of a k–ω Wilcox turbulence model in the flow field solution. The second one is the contribution of the unsteadiness to the mean flow prediction. It will be shown that the mean flow depends on inlet turbulence only if the turbulence length scale is relatively high; otherwise the flow field is almost turbulence-invariant. For the unsteady simulations, unsteadiness modifies the mean flow solution only with low inlet turbulence.

Field measurement of near-surface typhoon characteristics using a smart monitoring system on a long-span arch bridge site

2019 ◽  
Vol 22 (8) ◽  
pp. 1977-1987
Author(s):  
Xu Wang ◽  
Huaqiang Li ◽  
Zengshun Chen ◽  
Yuanhao Qian ◽  
Yanru Wang ◽  
...  
Keyword(s):  
Monitoring System ◽  
Wind Velocity ◽  
Turbulence Intensity ◽  
Eastern China ◽  
Mean Flow ◽  
Time Duration ◽  
Lateral Direction ◽  
Near Surface ◽  
Gust Factor ◽  
The Mean

During landfall of Typhoon Haikui in Eastern China in 2012, ground level wind data were recorded using a smart monitoring system installed on JiuBao Bridge in Hangzhou, China. This article documents the mean flow and turbulence characteristics from data recorded during the storm. The results show that both turbulence intensity and gust factor decrease with the increase in the mean wind velocity. However, as the mean wind velocity increases, this trend gradually attenuates. The peak factor distribution with gust averaging time duration derived with the Typhoon Haikui data agrees well with the Durst curve. However, the longitudinal gust factor derived from the typhoon wind-speed record in this study is higher compared with the curves proposed by Durst and Krayer-Marshall. Analyses of the gust factor distribution with the turbulence intensity during the passage of the storm reveal a similarity to the empirical curves of Ishizaki and Choi. Results show that the relationship between lateral turbulence and gust factors can be well represented by a quadratic polynomial. Turbulence scale increased with mean wind velocity. The values of autocorrelation coefficients in longitudinal direction are larger than those in lateral direction. There has no obvious dependency of cross-correlation coefficients with mean wind velocity. In general, the wind characteristics in this study are shown to be very similar to those of winds under normal circumstance.

Experimental Investigation of a Tandem Cylinder System With a Yawed Upstream Cylinder

2011 ◽  
Author(s):  
Stephen J. Wilkins ◽  
Joseph W. Hall
Keyword(s):  
Experimental Investigation ◽  
Flow Field ◽  
Unsteady Flow ◽  
Surface Pressure ◽  
Vortex Shedding ◽  
Flow Direction ◽  
Pressure Fluctuations ◽  
Mean Flow ◽  
The Mean ◽  
Velocity Spectra

The unsteady flow field produced by a tandem cylinder system with the upstream cylinder yawed to the mean flow direction is investigated for upstream cylinder yaw angles from α = 60° to α = 90°. Multi-point fluctuating surface pressure and hotwire measurements were conducted at various spanwise positions on both the upstream and downstream cylinders. The results indicate that yawing the front cylinder to the mean flow direction causes the pressure and velocity spectra on the upstream and downstream cylinders to become more broadband than for a regular tandem cylinder system, and reduces the magnitude of the peak associated with the vortex-shedding. However, span-wise correlation and coherence measurements indicate that the vortex-shedding is still present and was being obscured by the enhanced three-dimensionality that the upstream yawed cylinder caused and was still present and correlated from front to back, at least for the larger yaw angles investigated. When the cylinder was yawed to α = 60°, the pressure fluctuations became extremely broadband and exhibited shorter spanwise correlation.

Measurements with a pulsed-wire and a hot-wire anemometer in the highly turbulent wake of a normal flat plate

1976 ◽  
Vol 77 (3) ◽  
pp. 473-497 ◽  
Author(s):  
L. J. S. Bradbury
Keyword(s):  
Turbulent Flow ◽  
Flat Plate ◽  
Flow Direction ◽  
Operating Conditions ◽  
Turbulent Intensity ◽  
Hot Wire ◽  
Mean Flow ◽  
Mean Velocity ◽  
The Mean ◽  
Better Than

This paper describes an investigation into the response of both the pulsed-wire anemometer and the hot-wire anemometer in a highly turbulent flow. The first part of the paper is concerned with a theoretical study of some aspects of the response of these instruments in a highly turbulent flow. It is shown that, under normal operating conditions, the pulsed-wire anemometer should give mean velocity and longitudinal turbulent intensity estimates to an accuracy of better than 10% without any restriction on turbulence level. However, to attain this accuracy in measurements of turbulent intensities normal to the mean flow direction, there is a lower limit on the turbulent intensity of about 50%. An analysis is then carried out of the behaviour of the hot-wire anemometer in a highly turbulent flow. It is found that the large errors that are known to develop are very sensitive to the precise structure of the turbulence, so that even qualitative use of hot-wire data in such flows is not feasible. Some brief comments on the possibility of improving the accuracy of the hot-wire anemometer are then given.The second half of the paper describes some comparative measurements in the highly turbulent flow immediately downstream of a normal flat plate. It is shown that, although it is not possible to interpret the hot-wire results on their own, it is possible to calculate the hot-wire response with a surprising degree of accuracy using the results from the pulsed-wire anemometer. This provides a rather indirect but none the less welcome check on the accuracy of the pulsed-wire results, which, in this very highly turbulent flow, have a certain interest in their own right.

Sign in / Sign up

Export Citation Format

Share Document