A Water Heater with Spraying and Heating Function Based on PLC

2014 ◽  
Vol 912-914 ◽  
pp. 570-572
Author(s):  
Kai Jun Chen
Keyword(s):  
Energy Saving ◽  
Environmental Protection ◽  
Heating Process ◽  
Solar Water Heater ◽  
The Novel ◽  
Water Heater ◽  
Water Heaters ◽  
Environment Temperature ◽  
New Type ◽  
Type Water

When bathing in winter, people often feel cold and wet. In order to solve this problem, a new type water heaters combining with the characteristics of atomizer and traditional water heater will be designed, so as to improve the environment temperature of bathroom. In this paper, design of the programmable controller which is applied to this new type of water heater is introduced, and the control principles of the atomizing heating process and the whole system are presented in detail. The novel solar water heater based on PLC not only has the effect of energy saving and environmental protection, but also works in a reliable way.

Research of Water Heater Automatic System

2011 ◽  
Vol 301-303 ◽  
pp. 373-376
Author(s):  
Ting Jun Li ◽  
Qin Xu ◽  
Jian Cun Ren ◽  
Bing Zhi Huang ◽  
Ming Bo Zhu
Keyword(s):  
Solar Energy ◽  
Energy Saving ◽  
Environmental Protection ◽  
Automatic System ◽  
Solar Water Heater ◽  
Water Heater ◽  
Solar Water ◽  
Software And Hardware

With environmental protection, energy saving awareness has enhanced, the use of solar energy has become a trend. Designing a large solar water heater automatic system, which adapts for heating and bathing. It introduces the system’s form, and the study of software and hardware. The system achieves a complementarily to the light, heat and electricity, and achieves the measurement, display of temperature and water.

Case Analysis of the Solar Heating System Assisted by Condensing Wall-Mounted Gas Heater

2014 ◽  
Vol 672-674 ◽  
pp. 7-12
Author(s):  
Guang Xiao Kou ◽  
Ling Ling Cai ◽  
Yong Jun Ye ◽  
Rong Rong Lu ◽  
Pei Na Shang
Keyword(s):  
Energy Saving ◽  
Environmental Protection ◽  
Case Analysis ◽  
Electric Heating ◽  
Heating System ◽  
Solar Heating ◽  
Solar Water Heater ◽  
Contrastive Analysis ◽  
Water Heater ◽  
Solar Water

Taking household heating for an example, this paper has introduced the composition and characteristics of combined heating system with condensing wall-mounted boiler and solar water heater; and through the simple contrastive analysis of the economy and environmental protection with the solar heating system assisted by electric heating and wall-mounted gas heater, it is believed that the heating system combined with condensing gas heater and solar heating is the better choice of household heating considering its energy saving, economy and environmental protection.

Modernization of Water Treatment System at Agricultural Enterprises Due to Introduction of Solar Energy

2020 ◽  
Vol 67 (1) ◽  
pp. 142-147
Author(s):  
Alina A. Aleksandrova ◽  
Maksim S. Zhuzhin ◽  
Yuliya M. Dulepova
Keyword(s):  
Mathematical Model ◽  
Water Treatment ◽  
Solar Energy ◽  
Energy Saving ◽  
Electric Energy ◽  
Solar Water Heater ◽  
Water Heater ◽  
Agricultural Enterprises ◽  
Solar Water ◽  
The Cost

Energy saving today is an integral part of the development strategy of agricultural organizations. Considerable attention is paid to the modernization and automation of technological processes in agricultural enterprises, which can improve the quality of work and reduce the cost of production. The direction of modernization is to reduce the consumption of electric energy by improving the water treatment system in livestock complexes. (Research purpose) The research purpose is to determine the potential of solar energy used in the Nizhny Novgorod region and to determine the possibility of its use for water heating in livestock complexes and to consider the cost-effectiveness of using a device to heat water through solar energy. (Materials and methods) Authors used an improved algorithm of Pixer and Laszlo, applied in the NASA project «Surface meteorology and Energy», which allows to calculate the optimal angle of inclination of the device for heating water. (Results and discussion) Designed a mock-up of a livestock complex with a solar water heater installed on the roof, protected by patent for invention No. 2672656. A mathematical model was designed experimentally to predict the results of the plant operation in non-described modes. (Conclusions) The article reveales the optimal capacity of the circulation pump. Authors have created a mathematical model of the device that allows to predict the water heating in a certain period of time. The article presents the calculations on the energy and economic efficiency of using a solar water heater. An electric energy saving of about 30 percent, in the economic equivalent of 35 percent.

Thermal Properties Study of a Solar Water Heater Tank with a Mantle Exchanger

2014 ◽  
Vol 3 (1) ◽  
pp. 92-100 ◽  
Author(s):  
Mourad Chikhi ◽  
Rabah Sellami ◽  
Nachida Kasbadji Merzouk
Keyword(s):  
Heat Exchanger ◽  
Renewable Energy Sources ◽  
Supply And Demand ◽  
Research Work ◽  
Solar Water Heater ◽  
Water Heater ◽  
Solar Water ◽  
Incentive Programs ◽  
Water Heaters ◽  
Solar Water Heaters

The development and use of renewable energy sources and technologies are becoming vital for the management of energy supply and demand. For development solar water heaters, the incentive programs are supported by the Algerian government to generalize the using of this kind of energy especially in Sahara. This study is a part of program to develop a new solar water heater in UDES (Algeria). In this research work, the thermal performance of a solar water heater with a mantle heat exchanger is investigated numerically using Comsol Multyphysics software. The objective is to investigate the influence of the mantle heat exchanger thickness on the performance of solar water heaters. The results show, for 160 liters capacity of the solar water heaters tank, the 13mm of the heat exchanger thickness leads to improve the efficiency of the solar water heater.

scholarly journals Thermal efficiency and cost analysis of solar water heater made in Rwanda

2018 ◽  
Vol 37 (3) ◽  
pp. 1147-1161 ◽  
Author(s):  
Esdras Nshimyumuremyi ◽  
Wang Junqi
Keyword(s):  
Cost Analysis ◽  
Thermal Efficiency ◽  
Solar Water Heater ◽  
Water Heating ◽  
Water Heater ◽  
Solar Water Heating ◽  
Solar Water ◽  
Water Heaters ◽  
Solar Water Heaters ◽  
Made In

Solar water heating is a technology of capturing the energy from the sun's radiation for the purpose of raising the temperature of water from water supply temperature to the desired higher temperature depending on the use. There are many views and discussions on the questions of thermal efficiency of solar water heaters and their associated cost, especially different customers/users want to replace their existing conventional water heating energy by solar water heating systems. In this present paper, a deep investigation has been accomplished to determine thermal efficiency and cost analysis of solar water heater made in Rwanda. During manufacturing of solar water heater, the collector was the main part to emphasize on. The high efficiency of the system was achieved by replacing galvanized iron sheet by aluminum sheet slotted and black painted as an absorber plate. The ambient temperature and average solar radiation of the three sites where solar water heaters are installed were investigated. The used materials, specifications and sizing were discussed in this paper.

Characteristic Heat Removal Efficiency for Thermosyphon Solar Water Heaters During the System Application Phase

2004 ◽  
Vol 126 (3) ◽  
pp. 950-956 ◽  
Author(s):  
J. M. Chang
Keyword(s):  
Removal Efficiency ◽  
Empirical Model ◽  
System Application ◽  
Heat Removal ◽  
Solar Water Heater ◽  
Water Heater ◽  
Solar Water ◽  
Water Heaters ◽  
Heat Removal Efficiency ◽  
Solar Water Heaters

The overall performance rating of a thermosyphon solar water heater should take into consideration its heat removal efficiency during the system application phase. This study employs a precise on-line operation to first identify physical heat removal patterns of a thermosyphon solar water heater, and then develops an empirical model for deriving its characteristic heat removal efficiency. This empirical model is in the form of a logarithmic curve, and has a high data correlation coefficient of 0.889 to 0.967. Based upon the empirical model, this study defines a characteristic heat removal efficiency parameter for thermosyphon solar water heaters. Finally, this study establishes a storage tank design method which enables the characteristic heat removal efficiency of the complete system to be optimized.

Study of Different Types of Water Heating Systems - Under Living Lab Conditions

2019 ◽  
Author(s):  
Swapnil Dubey
Keyword(s):  
Energy Saving ◽  
Heat Pump ◽  
Heating System ◽  
Heat Pumps ◽  
Electrical Heating ◽  
Water Heating ◽  
Water Heater ◽  
Water Heaters ◽  
Living Lab ◽  
Almost All

Abstract In Singapore, roughly 20% of the energy consumed by households is used for water heating and almost all the energy consumed by conventional electric water heaters. One of the significant potential energy saving opportunities lies in using energy-efficient water heating appliances. Recently, there has been a move towards energy-saving design and the use of natural refrigerants over fluorocarbons. Unlike conventional electric storage water heaters, which use electricity to heat water directly, heat pump storage water heaters use electricity only to operate a pump that circulates refrigerants around the system. This refrigerant collects heat from the surrounding atmosphere and transfers it to the water. CO2 heat pumps have low global warming potential when compared to other refrigerants based heat pumps, has zero ozone depletion potential, inexpensive, non-flammable, generate high temperature. In this project, a comparative analysis of three different water heater types has been presented based on real-time usage and living-lab conditions under the tropical climate of Singapore. These three types are: 1. Electrical heater storage type 2. Hybrid heat pump with auxiliary electrical heating water heater 3. CO2 heat pump water heater without auxiliary heating Study found significant energy saving using CO2 heat pump compared to other water heating system and also better for environment.

Evacuated Tube Solar Collectors Integrated With Phase Change Materials and Silicone Oil

2017 ◽  
Author(s):  
Alexios Papadimitratos ◽  
Sarvenaz Sobhansarbandi ◽  
Vladimir Pozdin ◽  
Anvar Zakhidov ◽  
Fatemeh Hassanipour
Keyword(s):  
Phase Change ◽  
Solar Collector ◽  
Phase Change Materials ◽  
Silicone Oil ◽  
Solar Water Heater ◽  
Water Heater ◽  
Solar Water ◽  
Water Heaters ◽  
Evacuated Tubes ◽  
Solar Water Heaters

This paper presents a novel method of integrating Phase Change Materials (PCMs) and Silicone oil within the Evacuated solar Tube Collectors (ETCs) for application in Solar Water Heaters (SWHs). In this method, heat pipe is immersed inside the phase change material, where heat is effectively accumulated and stored for an extended period of time due to thermal insulation of evacuated tubes. The proposed solar collector utilizes two distinct phase change materials (dual-PCM), namely Tritriacontane paraffin and Erythritol, with melting temperature 72°C and 118°C respectively. The integration of Silicone oil for uniform melting of the PCMs, utilizes the convective heat transfer inside the evacuated tubes, as this liquid polymerized material is well known for its temperature-stability and an excellent heat transfer medium. The operation of solar water heater with the proposed solar collector is investigated during both normal and stagnation (on-demand) operation. The feasibility of this technology is tested via small scale and large scale commercial solar water heaters. Beyond the improved functionality for solar water heater systems, the results from this study show show efficiency improvement of 26% for the normal operation and 66% for the stagnation mode compared with standard solar water heaters that lack phase change materials and silicone oil. The benefit of this method includes improved functionality by delayed release of heat, thus providing hot water during the hours of high demand or when solar intensity is insufficient such in a cloudy day and during night time.

Sign in / Sign up

Export Citation Format

Share Document