Grain Boundary Induced Lateral Propagation of Intermetallic Phases in Nano-Grained Cu-Sn Thin Film Couples

2009 ◽  
Vol 7 ◽  
pp. 59-68 ◽  
Author(s):  
Yuri S. Kaganovsky ◽  
Lyudmila N. Paritskaya ◽  
V.V. Bogdanov

The kinetics of lateral Cu6Sn5 and Cu3Sn phase propagation induced by grain boundary (GB) interdiffuson in thin-film diffusion couples Cu-Sn were studied in a temperature range 160-180oC by optical microscopy, AFM, SEM, and energy-dispersive X-ray spectroscopy (EDS). Nano-grained Cu and Sn films were sequentially deposited on glass substrates with 5 – 20 µm overlap. To prevent surface diffusion and thus separate GB-diffusion contribution into kinetics of phase propagation, the surfaces of diffusion couples were covered by a thin (20 – 40 nm) carbon layer. It was found that the rates of lateral Cu6Sn5 and Cu3Sn phase spreading in thin-film couples exceed several times the spreading rates of the same phases over the surface of coarse-grained samples and 50 – 70 times exceed the rates in the bulk of massive samples. Kinetics of lateral phase spreading both in thin-film and in massive diffusion couples obeys parabolic law. Similarly to A and B regimes for GB tracer diffusion, A and B regimes of GB reactive diffusion were found in the spreading Cu3Sn phase. The kinetics of the phase propagation turned out independent of the film thickness (in the range 40 – 200 nm) if the films possessed similar grain size, whereas the kinetics was rather sensitive to the grain size and GB structure. Theoretical analysis of the phase propagation kinetics accelerated by GB diffusion has been done and the phase propagation rates have been calculated. By comparison experimentally measured phase propagation rates with the calculated ones we determined the GB diffusion coefficients of Sn in both growing phases.

1998 ◽  
Vol 4 (2) ◽  
pp. 141-145 ◽  
Author(s):  
Matthew T. Johnson ◽  
C. Barry Carter

The kinetics of a thin-film, solid-state reaction were investigated in the spinel-forming oxide system Fe2O3/MgO. In this study, epitactic thin films of Fe2O3 (α, or corundum, structure) were deposited on (001)-oriented MgO using pulsed-laser deposition (PLD). The resulting diffusion couples were then reacted at elevated temperatures in air to induce the reaction between the thin-film and bulk substrate to form the spinel, MgFe2O4. Both the as-deposited and reacted diffusion couples were characterized using low-voltage scanning and transmission electron microscopy. These techniques allow the kinetics of the reaction and the structural properties of the spinel to be investigated.


1985 ◽  
Vol 49 (353) ◽  
pp. 539-546 ◽  
Author(s):  
R. Dearnley

AbstractMeasurements of fine-grained dolerites by optical automatic image analysis are used to illustrate the effects of magnification and resolution on the values obtained for grain ‘size’, grain boundary length, surface area per unit volume, and other parameters. Within the measured range of optical magnifications (× 26 to × 3571) and resolutions (1.20 × 10−3 cm to 8.50 × 10−6 cm), it is found that the values of all grain parameters estimated by chord size analysis vary with magnification. These results are interpreted in terms of the concepts of ‘fractal dimensions’ introduced by Mandelbrot (1967, 1977). For some comparative purposes the fractal relationships may be of little significance as relative changes of size, surface area, and other parameters can be expressed adequately at given magnification(s). But for many studies, for instance in kinetics of grain growth, the actual diameter or surface area per unit volume is an important dimension. The consequences are disconcerting and suggest that it may be difficult in some instances to specify the ‘true’ measurements of various characteristics of fine-grained aggregates.


2007 ◽  
Vol 558-559 ◽  
pp. 1237-1242
Author(s):  
M.C. Kim ◽  
D.A. Kim ◽  
Joong Kuen Park

The effect of carbon addition on the grain growth and ordering kinetics of FePt film has been experimentally studied by sputter-depositing a monolithic FePt-20at.%C film of 24 nm. Carbon addition of 20at.% to FePt thin film in a form of FePt (20 nm)/Cn (4 nm) (n = 1, 4) significantly reduced both the grain growth and ordering kinetics. Reducing the thickness of carbon layer, i.e. from n = 1 to n = 4, led to a much finer grain size distribution as well as to a finer grain size. The Monte Carlo simulation study indicated that the decrease of grain growth and ordering kinetics is primarily due to a continuous decrease of the mobility of order – disorder inter-phase with the progress of ordering reaction. This can eventually lead to a stable 2-phase grain structure inter-locked by low mobility inter-phases and is responsible for the formation of a fine grain size distribution in the FePt/Cn film with n = 4.


2014 ◽  
Vol 2014 ◽  
pp. 1-7
Author(s):  
Licai Fu ◽  
Jun Yang ◽  
Qinling Bi ◽  
Weimin Liu

Wear behaviour of nanocrystalline Fe88Si12alloy has been investigated in water environment compared with the coarse grained counterpart. The friction coefficient of the Fe88Si12alloy changes slightly with the grain size. The wear resistance is enhanced as the grain size decreases first and then reduces when the grain size continues to decrease, although the hardness of the Fe88Si12alloy decreases monotonically with the grain size. It is contrary to the predications of Archard’s formula. The best wear resistance of Fe88Si12alloy with grain size of 40 nm in our present work is attributed to the proper grain boundary volume fraction and composite phase structures of disordered B2 and ordered D03.


2011 ◽  
Vol 172-174 ◽  
pp. 1128-1133 ◽  
Author(s):  
Eric A. Jägle ◽  
Eric J. Mittemeijer

The kinetics of phase transformations for which nucleation occurs on parent-micro-structure grain boundaries, and the resulting microstructures, were investigated by means ofgeometric simulations. The influences of parent microstructure grain-boundary area density,parent grain-size distribution and parent→product kinetics were analysed. Additionally, thesimulated kinetics were compared with predictions from two kinetic models, namely a modelproposed for spatially random nucleation and a model proposed for grain-boundary nucleation.It was found that the simulated transformed fraction as function of time lies in between the twomodel predictions for all investigated parent microstructures and parent→product kinetics.


1995 ◽  
Vol 10 (5) ◽  
pp. 1134-1145 ◽  
Author(s):  
T. Barge ◽  
P. Gas ◽  
F.M. d'Heurle

The solid state reaction between Co and Si has been studied in bulk diffusion couples between 850 and 1100 °C. At the scale of the observations made, the three phases Co2Si, CoSi, and CoSi2 are found to grow simultaneously, according to diffusion controlled kinetics. The results are analyzed in term of the Nernst-Einstein equation that directly relates diffusion fluxes to the free energy changes driving the formation. The growth rates obtained for CoSi2 at high temperatures, in the present bulk samples, are compared with those determined by others in thin films, at much lower temperatures. The comparison requires that attention should be paid to two factors. The first one is that the laws of growth are slightly different for a phase growing simultaneously with two other ones (bulk) and one phase growing alone (thin films). The second factor is the grain size of the various samples, which varies with the temperature of reaction. Once this is done, excellent agreement is obtained between the two sets of measurements. Moreover it is shown that knowing the grain size, it is possible to calculate quite accurately the growth rate from the respective isotope diffusion coefficients both for lattice and grain boundaries of Co and Si in CoSi2.


2014 ◽  
Vol 2 ◽  
pp. 1-72 ◽  
Author(s):  
Helmut Mehrer

800x600 Intermetallics are compounds of two metals or of metal(s) and semimetal(s). Their structures are usually different from those of the constituents. Some intermetallics are interesting functional materials, others have attracted attention as high-temperature structural materials. We remind the reader of some fundamentals of solid-state diffusion and to the major techniques for tracer diffusion measurements, interdiffusion studies and the growth kinetics of layers in solid diffusion couples. Starting from self-diffusion, which is the most basic diffusion phenomenon in any solid, the paper covers the main features of diffusion in binary intermetallics from the systems Cu-Zn, Ni-Al, Fe-Al, Mg-Al, Ni-Ge, Ni-Ga, Fe-Si, Ti-Al, Ni-Mn, Mo-Si, Co-Nb and Ni-Nb.. We illustrate the influence of phase transitions on diffusion and point out some common features of diffusion in intermetallics. We discuss in detail diffusion in silicides of iron, molybdenum and of silicides of refractory metals. We also consider aluminides of iron, nickel, and titanium and in the aluminium-magnesium system. We consider diffusion in intermetallics of the cobalt-niobium and nickel-niobium system and in in the Nb-Sn and V-Ga systems. We finish with some remarks about grain boundary diffusion in intermetallics. Normal 0 21 false false false UK X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Calibri","sans-serif";}


1995 ◽  
Vol 67 (19) ◽  
pp. 2795-2797 ◽  
Author(s):  
K. F. Dreyer ◽  
W. K. Neils ◽  
R. R. Chromik ◽  
D. Grosman ◽  
E. J. Cotts

Sign in / Sign up

Export Citation Format

Share Document