Switch Architecture with Wavelength Conversion in Optical Networks

2011 ◽  
Vol 474-476 ◽  
pp. 1479-1482
Author(s):  
Ning Zhang

In this paper, we analyze the optical network with wavelength conversion, and discuss the architecture of network with wavelength converter in its node. The optical cross connects technology for wavelength division multiplexing (WDM) is rapidly developing. Wavelength conversion is one of the key techniques for switch WDM optical networks. The wavelength conversion technology can achieve wavelength reuse, decrease wavelength competition, enhance network flexibility and scalability, and simplify network structure and management. The results show that If these cross-connectors feature integrated with wavelength conversion, network will be better able to play the full potential of WDM optical networks.

2021 ◽  
Author(s):  
Ebrahim E. Elsayed

Abstract Optical nonlinearities give rise to many ubiquitous effects in optical fibres ’. These effects are interesting in themselves and can be detrimental in optical communication. In the Dense Wave length division multiplexing system (DWDM) the nonlinear effects plays important role .DWDM system offers component reliability, system availability and system margin. DWDM system carries different channels. Hence power level carried by fiber increases which generates nonlinear effect such as SPM, XPM, SRS, SBS and FWM. Four wave mixing (FWM) is one of the most troubling issues. The FWM gives crosstalk in DWDM system whose channel spacing is narrow. Wavelength exchanging enables data swapping between two different wavelengths simultaneously. These phenomena have been used in many applications in Wavelength Division Multiplexing (WDM) optical networks such as, wavelength conversion, wavelength sampling, optical 3R, optical interconnects and optical add-drop multiplexing.


2021 ◽  
Author(s):  
Ebrahim E. Elsayed

Abstract Optical nonlinearities give rise to many ubiquitous effects in optical fibres ’. These effects are interesting in themselves and can be detrimental in optical communication. In the Dense Wave length division multiplexing system (DWDM) the nonlinear effects plays important role .DWDM system offers component reliability, system availability and system margin. DWDM system carries different channels. Hence power level carried by fiber increases which generates nonlinear effect such as SPM, XPM, SRS, SBS and FWM. Four wave mixing (FWM) is one of the most troubling issues. The FWM gives crosstalk in DWDM system whose channel spacing is narrow. Wavelength exchanging enables data swapping between two different wavelengths simultaneously. These phenomena have been used in many applications in Wavelength Division Multiplexing (WDM) optical networks such as, wavelength conversion, wavelength sampling, optical 3R, optical interconnects and optical add-drop multiplexing.


2021 ◽  
Author(s):  
Ebrahim E. Elsayed

Abstract Optical nonlinearities give rise to many ubiquitous effects in optical fibres. These effects are interesting in them and can be detrimental in optical communication. In the Dense Wave length division multiplexing system (DWDM) the nonlinear effects plays important role .DWDM system offers component reliability, system availability and system margin. DWDM system carries different channels. Hence power level carried by fiber increases which generates nonlinear effect such as SPM ,XPM, SRS, SBS and FWM. Four waves mixing (FWM) is one of the most troubling issues. The FWM gives crosstalk in DWDM system whose channel spacing is narrow. Wavelength exchanging enables data swapping between two different wavelengths simultaneously. These phenomena have been used in many applications in Wavelength Division Multiplexing (WDM) optical networks such as, wavelength conversion, wavelength sampling, optical 3R, optical interconnects and optical add-drop multiplexing.


Author(s):  
MD. ISHTIAQUE AZIZ ZAHED ◽  
MD. SHAH AFRAN

The impact of inband crosstalk on an optical signal passing through optical cross-connect nodes (OXC’s) in wavelength division multiplexing (WDM) optical network, is studied from the equation of electric field with crosstalk and the corresponding current. The analysis has been done for two SSM (space switching matrix) OXC architecture namely WSXC & WIXC where later one has full wavelength conversion capability. Although WIXC attenuates more crosstalk though it is found that depending on the values of optical propagation delay differences, coherent time of lasers and time duration of one bit of the signal, the required power penalty in WIXC may be greater than that of WSXC in some cases. The analysis has been performed on the measures of Bit Error Rate (BER) and Power Penalty.


2018 ◽  
Vol 29 (06) ◽  
pp. 1003-1021 ◽  
Author(s):  
Yu-Liang Liu ◽  
Jou-Ming Chang

The exchanged crossed cube, denoted by [Formula: see text], is a novel interconnection network with fewer edges and smaller diameter compared to other variations of the corresponding hypercube. The linear array, denoted by [Formula: see text], is one of the most popular topologies in optical networks. This paper addresses the routing and wavelength assignment for realizing [Formula: see text] communication pattern on wavelength division multiplexing (WDM) optical network [Formula: see text], where [Formula: see text]. We prove that the congestion for [Formula: see text] on [Formula: see text] is equal to [Formula: see text], which is the lower bound of the minimum number of required wavelengths. In addition, an embedding scheme and an optimal wavelength assignment algorithm that achieve this bound are also proposed.


2019 ◽  
Vol 0 (0) ◽  
Author(s):  
Harpreet Kaur ◽  
Munish Rattan

AbstractWith the overwhelming use of the Internet, the wavelength division multiplexing (WDM) optical networks have become the major mode of communication for wide applications. Hence, the routing and wavelength assignment (RWA) for a given traffic in WDM networks is the chief challenge in optical networks. This paper presents the RWA problem in WDM networks using the hybrid algorithm of flower pollination (FP) and simulated annealing (SA) algorithm (FA+SA) with and without wavelength conversion capability at the nodes of the network. Comparative analysis with techniques presented in literature is also carried out, i. e. differential evolution algorithm (DEA), firefly algorithm (FA), particle swarm optimization with less number of informers (Psolbest), SA and genetic algorithm (GA). The results prove that hybrid algorithm of FP and SA is potentially more efficient than algorithms present in literature for the light path establishment in an optical network.


Author(s):  
Swati Bhalaik ◽  
Ashutosh Sharma ◽  
Rajiv Kumar ◽  
Neeru Sharma

Objective: Optical networks exploit the Wavelength Division Multiplexing (WDM) to meet the ever-growing bandwidth demands of upcoming communication applications. This is achieved by dividing the enormous transmission bandwidth of fiber into smaller communication channels. The major problem with WDM network design is to find an optimal path between two end users and allocate an available wavelength to the chosen path for the successful data transmission. Methods: This communication over a WDM network is carried out through lightpaths. The merging of all these lightpaths in an optical network generates a virtual topology which is suitable for the optimal network design to meet the increasing traffic demands. But, this virtual topology design is an NP-hard problem. This paper aims to explore Mixed Integer Linear Programming (MILP) framework to solve this design issue. Results: The comparative results of the proposed and existing mathematical models show that the proposed algorithm outperforms with the various performance parameters. Conclusion: Finally, it is concluded that network congestion is reduced marginally in the overall performance of the network.


Author(s):  
Bin Wang

WDM optical networks are widely viewed as the most appropriate choice for the future Internet backbone with the potential to fulfill the ever-growing demands for bandwidth. A failure in a network such as a cable cut may result in a tremendous loss of data. Therefore, network survivability, the ability for a network to continue to provide services in the event of failures, is a very important issue in WDM optical networks. This chapter introduces the principles and state-of-the-art of survivability provisioning in optical networks, in particular, in optical networks that employ wavelength division multiplexing (WDM). Concepts of survivability provisioning in optical networks such as protection and restoration, dedicated versus shared survivability, path-based, link-based, segment-based, cycle-based survivability, and so on, are covered to provide multiple classes of quality of protection against single failure, dual-failure, multiple simultaneous failures, or shared risk link group failures, in WDM mesh networks. Recent developments in survivable service provisioning are summarized, such as survivability provisioning that takes into account the connection holding-time, survivability in WDM light-trail networks and optical burst switched networks. Finally, the chapter briefly examines future research directions.


Sign in / Sign up

Export Citation Format

Share Document