Comparison between an Advanced Numerical Simulation of Sheet Incremental Forming Using Adaptive Remeshing and Experimental Results

2013 ◽  
Vol 554-557 ◽  
pp. 1375-1381 ◽  
Author(s):  
Laurence Giraud-Moreau ◽  
Abel Cherouat ◽  
Jie Zhang ◽  
Houman Borouchaki
Keyword(s):  
Numerical Simulation ◽  
Numerical Model ◽  
Sheet Metal ◽  
Metal Forming ◽  
Tool Path ◽  
Incremental Forming ◽  
Computation Time ◽  
Experimental Results ◽  
Forming Process ◽  
Adaptive Remeshing

Recently, new sheet metal forming technique, incremental forming has been introduced. It is based on using a single spherical tool, which is moved along CNC controlled tool path. During the incremental forming process, the sheet blank is fixed in sheet holder. The tool follows a certain tool path and progressively deforms the sheet. Nowadays, numerical simulations of metal forming are widely used by industry to predict the geometry of the part, stresses and strain during the forming process. Because incremental forming is a dieless process, it is perfectly suited for prototyping and small volume production [1, 2]. On the other hand, this process is very slow and therefore it can only be used when a slow series production is required. As the sheet incremental forming process is an emerging process which has a high industrial interest, scientific efforts are required in order to optimize the process and to increase the knowledge of this process through experimental studies and the development of accurate simulation models. In this paper, a comparison between numerical simulation and experimental results is realized in order to assess the suitability of the numerical model. The experimental investigation is realized using a three-axis CNC milling machine. The forming tool consists in a cylindrical rotating punch with a hemispherical head. A subroutine has been developed to describe the tool path from CAM procedure. A numerical model has been developed to simulate the sheet incremental forming process. The finite element code Abaqus explicit has been used. The simulation of the incremental forming process stays a complex task and the computation time is often prohibitive for many reasons. During this simulation, the blank is deformed by a sequence of small increments that requires many numerical increments to be performed. Moreover, the size of the tool diameter is generally very small compared to the size of the metal sheet and thus the contact zone between the tool and the sheet is limited. As the tool deforms almost every part of the sheet, small elements are required everywhere in the sheet resulting in a very high computation time. In this paper, an adaptive remeshing method has been used to simulate the incremental forming process. This strategy, based on adaptive refinement and coarsening procedures avoids having an initially fine mesh, resulting in an enormous computing time. Experiments have been carried out using aluminum alloy sheets. The final geometrical shape and the thickness profile have been measured and compared with the numerical results. These measurements have allowed validating the proposed numerical model. References [1] M. Yamashita, M. Grotoh, S.-Y. Atsumi, Numerical simulation of incremental forming of sheet metal, J. Processing Technology, No. 199 (2008), p. 163 172. [2] C. Henrard, A.M. Hbraken, A. Szekeres, J.R. Duflou, S. He, P. Van Houtte, Comparison of FEM Simulations for the Incremental Forming Process, Advanced Materials Research, 6-8 (2005), p. 533-542.

New Method for Blank Expansion of Rectangular Box

2011 ◽  
Vol 308-310 ◽  
pp. 1004-1007
Author(s):  
Liu Ru Zhou ◽  
Hai Ming Wan
Keyword(s):  
Sheet Metal ◽  
Sheet Metal Forming ◽  
Metal Forming ◽  
Tool Path ◽  
Incremental Forming ◽  
Apex Angle ◽  
Forming Limit ◽  
Forming Process ◽  
Incremental Sheet Metal Forming ◽  
Planning Experiment

The principle of NC incremental sheet metal forming as well as the process planning, experiment of the square conical box forming are presented. Because the deformation of sheet metal only occurs around the tool head and the deformed region is subjected to stretch deformation and thins, and surface area increases. Sheet metal forming stepwise is to lead to the whole sheet metal deformation. The sine law indicates that the thickness of the square conical box wall is close to zero when the half-apex angle of the square conical box wall is close to zero. Therefore, we must know the forming limit half-apex angle to ensure that the forming can be carried out successfully, i.e., to ensure that the deformed region with a certain thickness will not fracture. It will succeed in square conical box incremental forming in a single tool-path if the forming is carried out with an angle which is larger than the forming limit half-apex angle. The fracture in the forming component can be avoided by these methods. A square conical box of uniform wall-thickness can be formed by NC incremental forming process. The thickness of deformation area is increased by increasing half-apex angle. The wrinkle in the forming component can be avoided by these methods.

Compensations for Tool Path to Enhance Accuracy During Double Sided Incremental Forming

2015 ◽  
Author(s):  
Rakesh Lingam ◽  
Anirban Bhattacharya ◽  
Javed Asghar ◽  
N. Venkata Reddy
Keyword(s):  
Sheet Metal ◽  
Sheet Metal Forming ◽  
Metal Forming ◽  
Tool Path ◽  
Incremental Forming ◽  
Single Point ◽  
Three Dimensional ◽  
Geometric Accuracy ◽  
Forming Process ◽  
Incremental Sheet Metal Forming

Incremental Sheet Metal Forming (ISMF) is a flexible sheet metal forming process that enables forming of complex three dimensional components by successive local deformations without using component specific tooling. ISMF is also regarded as die-less manufacturing process and in the absence of part-specific dies, geometric accuracy of formed components is inferior to that of their conventional counterparts. In Single Point Incremental Forming (SPIF), the simplest variant of ISMF, bending near component opening region is unavoidable due to lack of support. The bending in the component opening region can be reduced to a larger extent by another variant of ISMF namely Double Sided Incremental Forming (DSIF) in which a moving tool is used to support the sheet locally at the deformation zone. However the overall geometry of formed components still has unacceptable deviation from the desired geometry. Experimental observation and literature indicates that the supporting tool loses contact with the sheet after forming certain depth. Present work demonstrates a methodology to enhance geometric accuracy of formed components by compensating for tool and sheet deflection due to forming forces. Forming forces necessary to predict compensations are obtained using force equilibrium method along with thickness calculation methodology developed using overlap that occurs during forming (instead of using sine law). Results indicate that there is significant improvement in accuracy of the components produced using compensated tool paths.

Study of Sphere NC Sheet Metal Incremental Forming

2011 ◽  
Vol 239-242 ◽  
pp. 1036-1039
Author(s):  
Liu Ru Zhou
Keyword(s):  
Sheet Metal ◽  
Sheet Metal Forming ◽  
Metal Forming ◽  
Tool Path ◽  
Incremental Forming ◽  
Forming Process ◽  
Sheet Metal Incremental Forming ◽  
Incremental Sheet Metal Forming ◽  
Metal Forming Process ◽  
Planning Experiment

The principle of NC incremental sheet metal forming as well as the process planning, experiment of sphere forming are presented. Because the deformation of sheet metal only occurs around the tool head and the deformed region is subjected to shear deformation and thins, and surface area increases. Sheet metal forming stepwise is to lead to the whole sheet metal deformation. According to sine law, a sphere can’t be formed by NC incremental sheet metal forming process in a single process, rather, it must be formed in multi processes. Thus, the two time path process method is presented to form the sphere, and the experiment is made to verify it. A sphere can be formed from a sheet metal in NC incremental forming process by choosing appropriate tool-path planning. The fracture in the forming component can be avoided by these methods. A sphere of uniform wall-thickness can be formed from the truncated cone by NC incremental forming process.

Study on Square Conical Box NC Sheet Meta Incremental Forming

2011 ◽  
Vol 308-310 ◽  
pp. 1012-1015
Author(s):  
Liu Ru Zhou
Keyword(s):  
Sheet Metal ◽  
Sheet Metal Forming ◽  
Metal Forming ◽  
Tool Path ◽  
Incremental Forming ◽  
Apex Angle ◽  
Forming Limit ◽  
Forming Process ◽  
Incremental Sheet Metal Forming ◽  
Planning Experiment

The principle of NC incremental sheet metal forming as well as the process planning, experiment of the square conical box forming are presented. Because the deformation of sheet metal only occurs around the tool head and the deformed region is subjected to stretch deformation and thins, and surface area increases. Sheet metal forming stepwise is to lead to the whole sheet metal deformation. The sine law indicates that the thickness of the square conical box wall is close to zero when the half-apex angle of the square conical box wall is close to zero. Therefore, we must know the forming limit half-apex angle to ensure that the forming can be carried out successfully, i.e., to ensure that the deformed region with a certain thickness will not fracture. It will succeed in square conical box incremental forming in a single tool-path if the forming is carried out with an angle which is larger than the forming limit half-apex angle. The fracture in the forming component can be avoided by these methods. A square conical box of uniform wall-thickness can be formed by NC incremental forming process. The thickness of deformation area is increased by increasing half-apex angle. The wrinkle in the forming component can be avoided by these methods.

Finite Element Analysis of Incremental Sheet Forming for Metal Sheet

2018 ◽  
Vol 783 ◽  
pp. 148-153
Author(s):  
Muhammad Sajjad ◽  
Jithin Ambarayil Joy ◽  
Dong Won Jung
Keyword(s):  
Mechanical Properties ◽  
Sheet Metal ◽  
Tool Path ◽  
Incremental Forming ◽  
Single Point ◽  
Machining Process ◽  
Machining Parameters ◽  
Forming Process ◽  
Element Analysis ◽  
Tool Diameter

Incremental sheet metal forming, is a non-conventional machining process which offers higher formability, flexibility and low cost of production than the traditional conventional forming process. Punch or tool used in this forming process consecutively forces the sheet to deform locally and ultimately gives the target profile. Various machining parameters, such as type of tool, tool path, tool size, feed rate and mechanical properties of sheet metal, like strength co-efficient, strain hardening index and ultimate tensile strength, effects the forming process and the formability of final product. In this research paper, Single Point Incremental Forming was simulated using Dassault system’s Abaqus 6.12-1 and results are obtained. Results of sheet profile and there change in thickness is investigated. For this paper, we simulated the process in abaqus. The tool diameter and rotational speed is find out for the production of parts through incremental forming. The simulation is done for two type of material with different mechanical properties. Various research papers were used to understand the process of incremental forming and its simulation.

scholarly journals Common defects of parts manufactured through single point incremental forming

2021 ◽  
Vol 343 ◽  
pp. 04007
Author(s):  
Mihai Popp ◽  
Gabriela Rusu ◽  
Sever-Gabriel Racz ◽  
Valentin Oleksik
Keyword(s):  
Sheet Metal ◽  
Metal Forming ◽  
Incremental Forming ◽  
Single Point ◽  
Single Point Incremental Forming ◽  
Forming Process ◽  
Metal Forming Process ◽  
Serial Robot ◽  
The Many ◽  
Cold Metal

Single point incremental forming is one of the most intensely researched die-less manufacturing process. This process implies the usage of a CNC equipment or a serial robot which deforms a sheet metal with the help of a relatively simple tool that follows an imposed toolpath. As every cold metal forming process, besides the many given advantages it has also some drawbacks. One big drawback in comparison with other cold metal forming processes is the low accuracy of the deformed parts. The aim of this research is to investigate the sheet metal bending mechanism through finite element method analysis. The results shows that the shape of the retaining rings has a big influence over the final geometrical accuracy of the parts manufactured through single point incremental forming.

scholarly journals Modelling and Simulation of Sheet Metal Forming Processes

Metals ◽  
2019 ◽  
Vol 9 (12) ◽  
pp. 1356 ◽  
Author(s):  
Marta C. Oliveira ◽  
José V. Fernandes
Keyword(s):  
Numerical Simulation ◽  
Sheet Metal ◽  
Sheet Metal Forming ◽  
Metal Forming ◽  
Modelling And Simulation ◽  
Forming Process ◽  
Household Appliances ◽  
Indispensable Tool

Numerical simulation of sheet metal forming processes has become an indispensable tool for the design of components and their forming process, in industries ranging from the automotive, to the aeronautics, packing and household appliances [...]

Experimental Study on Residual Formability of Single Point Incrementally Formed Part

2019 ◽  
Author(s):  
Chetan P. Nikhare
Keyword(s):  
Sheet Metal ◽  
Sheet Metal Forming ◽  
Metal Forming ◽  
Incremental Forming ◽  
Thickness Distribution ◽  
Single Point ◽  
Forming Limit ◽  
Single Point Incremental Forming ◽  
Forming Process ◽  
Conventional Process

Abstract A substantial increase in demand on the sheet metal part usage in aerospace and automotive industries is due to the increase in the sale of these products to ease the transportation. However, due to the increase in fuel prices and further environmental regulation had left no choice but to manufacture more fuel efficient and inexpensive vehicles. These heavy demands force researchers to think outside the box. Many innovative research projects came to replace the conventional sheet metal forming of which single point incremental forming is one of them. SPIF is the emerging die-less sheet metal forming process in which the single point tool incrementally forces any single point of sheet metal at any processing time to undergo plastic deformation. It has several advantages over the conventional process like high process flexibility, elimination of die, complex shape and better formability. Previous literature provides enormous research on formability of metal during this process, process with various metals and hybrid metals, the influence of various process parameter, but residual formability after this process is untouched. Thus, the aim of this paper is to investigate the residual formability of the formed parts using single point incremental forming and then restrike with a conventional tool. The common process parameters of single point incremental forming were varied, and residual formability was studied through the conventional process. The strain and thickness distribution were measured and analyzed. In addition, the forming limit of the part was plotted and compared.

Effect of Toolpath on the Springback of 2024-T3 Aluminum During Single Point Incremental Forming

2015 ◽  
Author(s):  
Zachary C. Reese ◽  
Brandt J. Ruszkiewicz ◽  
Chetan P. Nikhare ◽  
John T. Roth
Keyword(s):  
Residual Stresses ◽  
Sheet Metal ◽  
Tool Path ◽  
Incremental Forming ◽  
Single Point ◽  
Final Part ◽  
Cnc Milling ◽  
Forming Process ◽  
Step Size ◽  
Part Geometry

Incremental forming is a nontraditional forming method in which a spherical tool is used to asymmetrically deform sheet metal without the need for expensive allocated dies. Incremental forming employs a tool path similar to that used when CNC milling. Hence, when forming a part, the forming tool makes a series of passes circumferentially around the workpiece, gradually spirally stepping down in the z-axis on each sequential pass. This tool path deforms the sheet metal stock into the final, desired shape. These passes can start from the outer radius of the part and work in (Out to In, OI forming) or they can start from the center of the shape and work outward (In to Out, IO forming). As with many sheet metal operations, springback is a big concern during the incremental forming process. During the deformation process, residual stresses are created within the workpiece causing the final formed shape to springback when it is unclamped, sometimes very significantly. The more complex the geometry of the final part and the more total deformation that occurs when forming the geometry, the greater the residual stresses that are generated within the part. The residual stresses that have built up in the piece cause more significant distortion to the part when it is released from the retaining fixturing. This paper examines how the step size (in the z direction), OI vs. IO forming, and final part geometry affect the total springback in a finished piece. For all of these tests 0.5 mm thick sheets of 2024-T3 aluminum were used to form both the truncated pyramid and truncated cone shape. From this investigation it was found that smaller step sizes result in greater springback, IO is significantly less effective in forming the part (due to workpiece tearing), and final part geometry plays an important role due to the creation of residual stresses that exist in corners.

Sign in / Sign up

Export Citation Format

Share Document