Effect of Surface Emissivity on Conjugate Turbulent Natural Convection in an Air-Filled Cavity with a Heat Source

2016 ◽  
Vol 685 ◽  
pp. 315-319 ◽  
Author(s):  
Igor V. Miroshnichenko ◽  
Mikhail A. Sheremet
Keyword(s):  
Heat Transfer ◽  
Natural Convection ◽  
Heat Source ◽  
Surface Radiation ◽  
Turbulent Heat Transfer ◽  
Turbulent Heat ◽  
Heat Conducting ◽  
Surface Emissivity ◽  
Turbulent Natural Convection ◽  
Effect Of Surface

The interaction of conjugate turbulent natural convection and surface thermal radiation in an air-filled square enclosure having heat-conducting solid walls of finite thickness and a heat source has been numerically studied. The primary focus was on the influence of surface emissivity on complex heat transfer. The mathematical model has been formulated in dimensionless variables such as stream function, vorticity and temperature using k-ε turbulent model. The effect of surface emissivity on the average total Nusselt number has been defined. The distributions of streamlines and temperature fields, describing characteristics of the analyzed fluid flow and heat transfer have been obtained. The results clearly show an essential effect of surface radiation on unsteady turbulent heat transfer.

Turbulent Heat Transfer in an Enclosure With a Horizontal Permeable Plate in the Middle

2006 ◽  
Vol 128 (11) ◽  
pp. 1122-1129 ◽  
Author(s):  
Edimilson J. Braga ◽  
Marcelo J. S. de Lemos
Keyword(s):  
Heat Transfer ◽  
Porous Plate ◽  
Porous Matrix ◽  
Turbulent Heat Transfer ◽  
Turbulent Heat ◽  
Turbulent Natural Convection ◽  
Nusselt Numbers ◽  
Model Solutions ◽  
Volume Method ◽  
Rayleigh Numbers

Turbulent natural convection in a vertical two-dimensional square cavity, isothermally heated from below and cooled at the upper surface, is numerically analyzed using the finite volume method. The enclosure has a thin horizontal porous obstruction, made of a highly porous material and extremely permeable, located at the cavity midheight. Governing equations are written in terms of primitive variables and are recast into a general form. For empty cavities, no discrepancies result for the Nusselt number when laminar and turbulent model solutions are compared for Rayleigh numbers up to 107. Also, in general the porous obstruction decreases the heat transfer across the heated walls showing overall lower Nusselt numbers when compared with those without the porous obstruction. However, the presence of a porous plate in the cavity seems to force an earlier separation from laminar to turbulence model solutions due to higher generation rates of turbulent kinetic energy into the porous matrix.

Numerical study of surface radiation and combined natural convection heat transfer in a solar cavity receiver

2017 ◽  
Vol 27 (10) ◽  
pp. 2385-2399 ◽  
Author(s):  
Kamel Milani Shirvan ◽  
Mojtaba Mamourian ◽  
Soroush Mirzakhanlari ◽  
A.B. Rahimi ◽  
R. Ellahi
Keyword(s):  
Heat Transfer ◽  
Natural Convection ◽  
Rayleigh Number ◽  
Numerical Solutions ◽  
Convection Heat Transfer ◽  
Surface Radiation ◽  
Natural Convection Heat Transfer ◽  
Convection Heat ◽  
Surface Emissivity ◽  
Content Type

Purpose The purpose of this paper is to present the numerical solutions of surface radiation and combined natural convection heat transfer in a solar cavity receiver. The paper aims to discuss sundry issues that take place in the said model. Design/methodology/approach The numerical solutions are developed by means of second-order upwind scheme using the SIMPLE algorithm. Findings The effects of physical factors such as Rayleigh number (104 ≤ Ra ≤ 106), inclination angels of insulated walls (0º ≤ θ ≤ 10º) and the wall surface emissivity (0 ≤ ε ≤ 1) on natural convection-surface radiation heat transfer rate are analyzed. Impact of sundry parameters on flow quantities are discussed and displayed via graphs and tables. Stream lines and isothermal lines have also been drawn in the region of cavity. The numerical results reveal that increasing the Rayleigh number, wall surface emissivity and inclination angels of insulated walls in an open cavity enhances the mean total Nusselt number. The variations of the surface radiation and natural convection heat transfer mean Nusselt numbers are very small to the inclination angle of θ, while a significant change is noted for the case of Rayleigh number and emissivity. Originality/value To the best of authors’ knowledge, this model is reported for the first time.

Effect of Surface Radiation on Conjugate Natural Convection in a Square Enclosure with a Tube at Different Locations

2013 ◽  
Vol 281 ◽  
pp. 190-196 ◽  
Author(s):  
Jian Sheng Wang ◽  
Yong Xu
Keyword(s):  
Heat Transfer ◽  
Natural Convection ◽  
Heat Transfer Performance ◽  
Convection Heat Transfer ◽  
Surface Radiation ◽  
Square Enclosure ◽  
Conjugate Natural Convection ◽  
Different Temperatures ◽  
Vertical Walls ◽  
Effect Of Surface

The conjugate natural convection heat transfer with and without the interaction of the surface radiation in a square enclosure was carried out by numerical simulation. The vertical walls of the square enclosure were heated with different temperatures, and the others were adiabatic. A circular tube was inserted into the square enclosure. It was observed that varied location of the tube center can lead to different motion and heat transfer intensities. In addition, surface radiation reduces the convective heat transfer in the square enclosure compared to the pure natural convection case and enhances the overall heat transfer performance.

Lattice Boltzmann Method for Combined Natural Convection Surface Radiation in Open Cavity

2018 ◽  
Vol 10 (5) ◽  
Author(s):  
Ayoub Msaddak ◽  
Mohieddine Ben Salah ◽  
Ezeddine Sediki
Keyword(s):  
Heat Transfer ◽  
Nusselt Number ◽  
Natural Convection ◽  
Rayleigh Number ◽  
Lattice Boltzmann Method ◽  
Inclination Angle ◽  
Lattice Boltzmann ◽  
Surface Radiation ◽  
Surface Emissivity ◽  
Boltzmann Method

Lattice Boltzmann method (LBM) is performed to study numerically combined natural convection and surface radiation inside an inclined two-dimensional open square cavity. The cavity is heated by a constant temperature at the wall facing the opening. The walls normal to the heated surface are assumed to be adiabatic, diffuse, gray, and opaque while the open boundary is assumed to be black at ambient temperature. A Bathnagar, Gross and Krook (BGK) collision model with double distribution function (D2Q9-D2Q4) is adopted. Effects of surface radiation, inclination angle, and Rayleigh number on the heat transfer are analyzed and discussed. Results are presented in terms of isotherms, streamlines, and Nusselt number. It was found that the presence of surface radiation enhances the heat transfer. The convective Nusselt number decreases with increasing surface emissivity as well as with Rayleigh number, while the total Nusselt number increases with increasing surface emissivity and Rayleigh number. The inclination angle has also a significant effect on flow and heat transfer inside the cavity. However, the magnitude of total heat transfer decreases considerably when open cavity is tilted downward.

Sign in / Sign up

Export Citation Format

Share Document