The Carbonation Depth of Fine Recycled Aggregate Concrete

2016 ◽  
Vol 722 ◽  
pp. 228-232 ◽  
Author(s):  
Magdaléna Šefflová ◽  
Tereza Pavlů

This paper is focused on carbonation resistance of fine recycled aggregate (FRA) concrete. Durability of FRA concrete is connected with uncertainties and doubts. One of the most unknown aspects of FRA cocnrete is carbonation resistance. This paper presents results of carbonation depth of FRA concrete. The FRA was originated from crushed construction and demolition (C&D) waste. There were prepared a total four concrete mixture. The first mixture was reference, did not include the FRA. In other concrete mixtures, natural sand was replaced by the FRA in various replacement ratios, specifically 10%, 20% and 30%. All prepared concrete mixtures were designated with the same parameters for clear comparison. From the test results it is possible to say that the use of the FRA as partial replacement of natural sand in concrete influences carbonation resistance of concrete. The carbonation depth was higher for concrete samples with the use of FRA. However it is possible to say that according to the carbonation resistance, the FRA concrete is possible to be used in the same applications as conventional concrete but it is necessary to verify this results.

2017 ◽  
Vol 1144 ◽  
pp. 59-64 ◽  
Author(s):  
Magdaléna Šefflová ◽  
Tereza Pavlů

This paper is focused on the durability of recycled aggregate (FRA) concrete. The durability of FRA concrete is connected with many uncertainties and doubts. This paper presents results of long-term of compressive strength, freeze – thaw resistance and carbonation depth of FRA concrete. The FRA was originated from crushed old concrete structures. There were prepared a total four concrete mixture. The first mixture was reference with natural sand. In other concrete mixtures, natural sand was replaced by the FRA in various replacement ratios, specifically 10 %, 20 % and 30 %. All prepared concrete mixtures were designated with the same parameters for clear comparison. It is possible to say that according to the durability, the FRA concrete is possible to used in the same applications as conventional concrete. However it is necessary to verify this results.


2016 ◽  
Vol 677 ◽  
pp. 260-265 ◽  
Author(s):  
Magdaléna Šefflová ◽  
Tereza Pavlů ◽  
Vladimír Hujer

The use of coarse recycled aggregate in concrete is already accepted in the Czech Republic but with specific restrictions. The problem is the use of fine recycled aggregate (FRA) in concrete. This paper is focused on behavior of concrete containing FRA. FRA, which originated from recycling plant in the Czech Republic, was used in an experimental part. FRA was obtained from demolished and crushed concrete structures. Four concrete mixtures were designed and prepared. The first concrete mixture was reference which did not include FRA. Natural sand was replaced by FRA in other concrete mixtures in varying ratio. There were tested physical, mechanical and deformation properties of concrete. According to test results it is possible to say that the use FRA as partial replacement of natural sand in concrete mixtures.


2018 ◽  
Vol 760 ◽  
pp. 204-209 ◽  
Author(s):  
Magdaléna Šefflová

This study deals with determination of the properties of the fine recycled aggregate (FRA) concrete with partial replacement of natural sand in concrete mixtures. The FRA was obtained from concrete waste and crushed on fraction 0 – 4 mm by laboratory jaw crusher. The geometrical and physical properties of natural sand and the FRA were tested. The main goal of this study is evaluation of the basic physical and mechanical properties of the concrete with partial natural sand replacement by the FRA such as workability, water absorption capacity, compressive strength and flexural strength. A total four concrete mixtures were prepared. The first concrete mixture was prepared only with natural sand, did not include the FRA. In other concrete mixtures, natural sand was replaced by the FRA in various replacement ratios (40 %, 50 %, and 60 %). All concrete mixtures were designated with the same parameters for clear comparison. The workability of fresh concrete mixtures and physical and mechanical properties of hardened concrete were tested.


2018 ◽  
Vol 760 ◽  
pp. 193-198 ◽  
Author(s):  
Kristina Fořtová ◽  
Tereza Pavlů

This paper presents research results of recycled fine aggregate concrete testing. The main aim of this contribution is verification of properties of fine aggregate concrete with partial replacement of fine natural aggregate by recycled masonry aggregate originated from construction and demolition waste. The influence of partial replacement of natural sand to mechanical properties and freeze-thaw resistance is described. The compressive strength and flexural strength were tested at the age of 28 and 60 days and after 25, 50, 75 and 100 freeze-thaw cycles. Partial replacement of natural sand was 0, 25 and 50 % for all these tests. Prismatic specimens were examined.


2018 ◽  
Vol 2018 ◽  
pp. 1-11 ◽  
Author(s):  
Flora Faleschini ◽  
Mariano Angelo Zanini ◽  
Lorenzo Hofer

Durability represents a crucial issue for evaluating safety and serviceability of reinforced concrete structures. Many studies have already focused on carbonation-induced corrosion of natural aggregate concrete (NAC) structures, leading to several prediction models to estimate carbonation depth. Less research is devoted instead on recycled aggregate concrete (RAC), about which limited experimental works exist aimed at assessing the carbonation coefficient in accelerated tests. Additionally, deteriorating processes are subject to uncertainty, when defining materials, geometry, and environmental actions during the service life of structures. This work presents a reliability-based analysis of carbonation resistance of RACs, using experimental carbonation coefficients derived from the literature, and applied in the full-probabilistic method prosed in fib Bulletin 34. Results demonstrate how aggregates replacement ratio and w/c ratio influence the reliability of RAC carbonation resistance.


2011 ◽  
Vol 250-253 ◽  
pp. 779-782 ◽  
Author(s):  
Ping Hua Zhu ◽  
Xin Jie Wang ◽  
Jin Cai Feng

A study on carbonation resistance of recycled aggregate concrete (RAC) subjected to different loading level was carried out. Three series of concrete mixtures were prepared with loading level of 0.5, 0.8, and 1.2 of ultimately tensive strength of concrete. The coarse recycled aggregate was used as 30%, 60% and 90% replacements of coarse natural aggregate and fine recycled aggregate as 10%, 20%, and 30% replacements of fine natural aggregate. Moreover, the fly ash and slag were employed as 15%, 25%, and 35% addition of cement. Although the action of the tensile stress had a negative effect on the carbonation resistance of RAC, it was found that the addition of fly ash and slag was able to mitigate this detrimental effect. The carbonation depth would increase with an increasing loading level and reduce when increasing the sand ratio.


2021 ◽  
Vol 11 (6) ◽  
pp. 2643
Author(s):  
Hui Liu ◽  
Minqi Hua ◽  
Pinghua Zhu ◽  
Chunhong Chen ◽  
Xinjie Wang ◽  
...  

Multiple recycling of waste concrete has attracted widespread attention. This study presented the carbonation behavior of repeatedly recycled aggregate concrete (RRAC) used in a micro-frozen region. The effects of freeze–thaw cycles on the carbonation depth of three generations of RRAC with 25%, 75%, and 100% of replacement rate were evaluated. All RRAC specimens after different numbers of freeze–thaw cycles were rapidly carbonated for 28 d indoors to test the carbonation resistance of concrete. The results suggested that the carbonation depth of RRAC subjected to freeze–thaw cycles is higher than that in the non-freeze–thaw condition. This is because the freeze–thaw damages cause the internal structure of RRAC to become porous and and prone to cracking, thus providing convenient channels for CO2 to react with the alkali in the cementitious materials. With the growth of replacement rate or recycling number, RRAC reveals serious freeze–thaw damage and inferior carbonation resistance, which is due to the continuous deterioration repeatedly recycled concrete aggregate (RRCA) quality. However, when the replacement rate was 25%, the carbonation depth for the third generation of RAC was comparable to the second generation of RAC at a 75% replacement rate, and even the first generation of 100% RAC. To ensure better carbonation resistance durability of multiple recycling RAC, the low replacement rate of RRCA should be considered. For the third generation of RAC with the 100% replacement rate, its highest carbonation depth after freeze–thaw cycles was 9.16 mm, which still met the design requirements for structural use in a micro-frozen region. This indicates that it is feasible for three generations of RRAC to be used in the micro-frozen environment and that RRAC has great engineering application potential and promotional value.


2020 ◽  
Vol 7 ◽  

Use of recycled aggregates in concrete has proved to be beneficial in attaining sustainable construction without compromising overall material and structural performance when compared with concrete containing natural aggregates. However, use of the recycled aggregates in concrete have resulted in reduction in compressive and tensile strengths with the recycled aggregates percentage increase in concrete. Furthermore, it is important to note that most of the finite element software used in the construction industry use concrete model derived from the test results of the conventional concrete, therefore, they may not always predict safe solution for recycled aggregates concrete (RAC). Therefore, in this investigation elasto-damage, proposed by Khan and Zahra, for natural aggregate concrete (NAC) was modified to incorporate the influence of recycled aggregates on the behaviour of concrete. Model use four parameters α, β, γ critical energy release rate (Rc) to predict the behaviour of recycled aggregate concrete for multi axial stress states. Parameters α, β and γ are used to predict the different behavior of concrete in tension and compression while Rc controls the damage growth rate. These parameters are defined as a function of concrete compressive strength (fc/) and its initial elastic modulus (Eo). Existing test results for uniaxial compressive state of stress were used to validate this model and it was found that it predicts better post cracking and post peak-behaviour of RAC as compared to the commercially available models for conventional concrete


Author(s):  
Oluwarotimi Michael Olofinnade ◽  
Isaac T. Oyawoye

Utilization of concrete wastes as aggregate in conventional concrete is regarded as a promising way of achieving sustainability within the built-up environment. This study investigated the performance of high strength concrete produced using recycled aggregate (RCA) with the addition of calcined clay in the concrete mixes. The recycled aggregate was sourced from concrete rubbles and treated by soaking in water, while calcined clay was sourced from the pilot pozzolana plant of the Nigerian Building and Road Research Institute (NBRRI). The recycled concrete aggregates were used as a replacement for coarse aggregate at levels of 0, 20, 40, 60, 80 and 100%, using a mix ratio of 1:1:2 at a constant water-binder ratio of 0.25. Superplasticizer was added to ensure the workability of the mixes. The calcined clay was added at 15 and 20% partial replacement for cement in the mixes. Physical and chemical properties of the materials used were determined, while the workability of the concrete mixes was examined using the slump. The compressive strength of the hardened concrete was determined after 7, 28 and 56 days of curing using 100 mm cube samples. Scanning Electron Microscope (SEM) was used to evaluate the morphology of selected concrete. Results showed that soaking of the recycled aggregate in water limit the water absorption rate of the RCA aggregates in the mixes, while the addition of calcined clay was observed to slightly reduce the workability of the concrete mixes. A reduction trend in compressive strength was noticed as the percentage of recycled aggregate increases, however, a significant increase in compressive strength was observed with the addition of calcined clay at 15% cement replacement. An optimum concrete mix containing 20% recycled aggregate and 15% calcined clay showed improve performance compare to the other mixes. The implication of these results suggests that recycled concrete aggregate can be used for the production of sustainable structural concrete.


2009 ◽  
Vol 417-418 ◽  
pp. 697-700
Author(s):  
Jian Zhuang Xiao ◽  
Bin Lei ◽  
Chuan Zeng Zhang

Concrete exposing to atmosphere suffers from changes in its internal structure, for instance loss of alkalinity of the cover concrete and corrosion of steel rebar due to carbonation, which in extreme cases affect the safety, the reliability and the durability or the service life of the structure. Carbonation is one of the key environmental actions that may cause structural failure. This study aims to gain some new information on the carbonation resistance when recycled coarse aggregates are used to mix new concrete. The concrete’s resistance to carbonation is determined by measuring the carbonation depth of 100mm×100mm×300mm concrete prisms in according to GBJ 82-85. Two series of tests including 9 groups of recycled aggregate concrete specimens are carried out, in which the effects of the quality and replacement of recycled coarse aggregates on the carbonation behavior of recycled concrete are evaluated. The essential test results are presented and discussed in this paper. Based on the findings of the present study, in order to reduce the unfavorable effects of recycled coarse aggregates on the recycled concrete, limiting the compressive strength grade of original concrete and the replacement of recycled coarse aggregate is a good option under the condition of using recycled concrete in considered projects.


Sign in / Sign up

Export Citation Format

Share Document