Strength of Normal and Inclined Sections of Bent Reinforced Concrete Elements with Zone Reinforcement Made of Steel Fiber

2022 ◽  
Vol 906 ◽  
pp. 7-15
Author(s):  
Dmitry Utkin
Keyword(s):  
Reinforced Concrete ◽  
Dynamic Loading ◽  
Calculation Method ◽  
Steel Fiber ◽  
Experimental Studies ◽  
Concrete Structures ◽  
Dynamic Loads ◽  
Reinforced Concrete Structures ◽  
Short Term ◽  
Concrete Elements

On the basis of theoretical and experimental studies, the prerequisites and the method of calculation of bent and compressed-curved reinforced concrete structures with zone reinforcement made of steel fiber, working under static and short-term dynamic loads, are formulated. In the developed method for calculating the strength of normal and inclined sections, a nonlinear deformation model is implemented, which is based on the actual deformation diagrams of materials. The developed calculation method is brought to the program of calculation of reinforced concrete structures with zone reinforcement of steel fiber under short-term dynamic loading, taking into account the inelastic properties of materials. The numerical studies made it possible to determine the influence of various parameters of steel-fiber reinforcement on the strength of reinforced concrete elements. To confirm the main results of the developed calculation method, experimental studies of reinforced concrete beam structures reinforced with conventional reinforcement and a zone steel-fiber layer are planned and carried out. Experimental studies were carried out under static and short-term dynamic loads. As a result of the conducted experiments, data were obtained that characterize the process of destruction, deformation and cracking of steel-reinforced concrete elements under such types of loading. The dependences of changes in the energy intensity of reinforced concrete structures with zone reinforcement made of steel fiber in the compressed and stretched cross-section zones under dynamic loading are obtained. The effectiveness of the use of fiber reinforcement of normal and inclined sections of bent and compressed-curved elements to improve the strength and deformative.

STRENGTH OF BENT REINFORCED CONCRETE ELEMENTS WITH ZONE REINFORCEMENT MADE OF STEEL FIBER

2021 ◽  
Vol 93 (1) ◽  
pp. 85-95
Author(s):  
D.G. UTKIN ◽  
Keyword(s):  
Reinforced Concrete ◽  
Steel Fiber ◽  
Experimental Studies ◽  
Concrete Structures ◽  
Dynamic Loads ◽  
Deformation Model ◽  
Reinforced Concrete Structures ◽  
Short Term ◽  
Fiber Layer ◽  
Concrete Elements

On the basis of theoretical and experimental studies, the assumptions and calculation method for flexible and compressed-curved reinforced concrete structures with zone reinforcement made of steel fiber operating under static and short-term dynamic loads are formulated. In the developed method for calculating the strength of normal and inclined sections, a nonlinear deformation model is implemented, which is based on the actual deformation diagrams of materials. To confirm the main results of this method, numerical and full-scale experimental studies of reinforced concrete beam structures reinforced with conventional reinforcement and a zone steel-fiber layer were planned and carried out. Experimental studies were carried out under static and short-term dynamic loads. As a result of the conducted experiments, data were obtained that characterize the process of destruction, deformation and crack formation of steel-reinforced concrete elements under such types of loading. The efficiency of fiber reinforcement of normal and inclined sections for increasing the strength and deformation characteristics of reinforced concrete structures is revealed.

scholarly journals Experimental study of beams on yielding supports with thrust

2018 ◽  
Vol 143 ◽  
pp. 01016
Author(s):  
Oleg Kumpyak ◽  
Zaur Galyautdinov ◽  
Daud Galyautdinov
Keyword(s):  
Reinforced Concrete ◽  
Crack Resistance ◽  
Dynamic Loading ◽  
Experimental Studies ◽  
Concrete Structures ◽  
Horizontal Displacement ◽  
Positive Outcome ◽  
Reinforced Concrete Beam ◽  
Reinforced Concrete Structures ◽  
Short Term

The design of reinforced concrete structures which are subjected to static and intensive dynamic loading requires taking into account the occurrence of thrust reaction resulting in significant increase in strength and crack resistance. Application of yielding supports for the purpose of increasing the energy capacity of structures shall also be considered. The present research aims to define feasibility of yielding supports application in thrust structures. The paper presents the outcomes of experimental studies of reinforced concrete beam structures on yielding supports subjected to thrust under static and short-term dynamic loading. The influence of thrust on the strength, deformation property and crack resistance of reinforced concrete structures under static and short-term dynamic loading was investigated. The combined use of yielding supports and the restriction of horizontal displacement of the support contour were also considered in the study. Research results testify on the positive outcome when yielding supports are applied in the structures subjected to thrust.

EXPERIMENTAL STUDIES OF REINFORCED CONCRETE STRUCTURES WITH CROSS-SHAPED SPATIAL CRACK UNDER TORSION WITH BENDING

2020 ◽  
Vol 92 (6) ◽  
pp. 13-25
Author(s):  
Vl.I. KOLCHUNOV ◽  
◽  
A.I. DEMYANOV ◽  
M.M. MIHAILOV ◽  
◽  
...  
Keyword(s):  
Reinforced Concrete ◽  
Experimental Determination ◽  
Calculation Method ◽  
Experimental Studies ◽  
Concrete Structures ◽  
Design Parameters ◽  
Reinforced Concrete Structures ◽  
Experimental Scheme

The article offers a method and program for experimental studies of reinforced concrete structures with cross-shaped spatial crack under torsion with bending, the main purpose of which is to check the design assumptions and experimental determination of the design parameters of the proposed calculation method. The conducted experimental studies provide an opportunity to test the proposed calculation apparatus and clarify the regularities for determining deflections, angles of rotation of extreme sections, and stresses in the compressed zone of concrete. For analysis, the article presents a typical experimental scheme for the formation and development of cracks in the form of a sweep, as well as characteristic graphs of the dependence of the angles of rotation of end sections.

Improvement Of Curvilinear Diagrams Of Concrete Deformation

2019 ◽  
pp. 99-104
Keyword(s):  
Reinforced Concrete ◽  
Peak Load ◽  
Experimental Studies ◽  
Concrete Structures ◽  
Deformation Model ◽  
Reinforced Concrete Structures ◽  
Significant Difference ◽  
Deformation Diagrams

Problems when calculating reinforced concrete structures based on the concrete deformation under compression diagram, which is presented both in Russian and foreign regulatory documents on the design of concrete and reinforced concrete structures are considered. The correctness of their compliance for all classes of concrete remains very approximate, especially a significant difference occurs when using Euronorm due to the different shape and sizes of the samples. At present, there are no methodical recommendations for determining the ultimate relative deformations of concrete under axial compression and the construction of curvilinear deformation diagrams, which leads to limited experimental data and, as a result, does not make it possible to enter more detailed ultimate strain values into domestic standards. The results of experimental studies to determine the ultimate relative deformations of concrete under compression for different classes of concrete, which allowed to make analytical dependences for the evaluation of the ultimate relative deformations and description of curvilinear deformation diagrams, are presented. The article discusses various options for using the deformation model to assess the stress-strain state of the structure, it is concluded that it is necessary to use not only the finite values of the ultimate deformations, but also their intermediate values. This requires reliable diagrams "s–e” for all classes of concrete. The difficulties of measuring deformations in concrete subjected to peak load, corresponding to the prismatic strength, as well as main cracks that appeared under conditions of long-term step loading are highlighted. Variants of more accurate measurements are proposed. Development and implementation of the new standard GOST "Concretes. Methods for determination of complete diagrams" on the basis of the developed method for obtaining complete diagrams of concrete deformation under compression for the evaluation of ultimate deformability of concrete under compression are necessary.

scholarly journals Optimizing of system "column-cfrp lamellas" with the strengthening of civil structures

2021 ◽  
Vol 9 (1) ◽  
pp. 1-5
Author(s):  
Irina Mayackaya ◽  
Batyr Yazyev ◽  
Anastasia Fedchenko ◽  
Denis Demchenko
Keyword(s):  
Reinforced Concrete ◽  
Composite Materials ◽  
Carbon Fiber ◽  
Concrete Structures ◽  
Polymeric Composite ◽  
Concrete Columns ◽  
Reinforced Concrete Structures ◽  
Structural Elements ◽  
Civil Structures ◽  
Concrete Elements

Reinforced concrete elements of structures in the form of columns, beams, ceilings are widely used in the construction of buildings and structures of industrial and civil construction. In most cases, the columns serve as supports for other building elements, for example, crossbars, slabs, girders, beams. One of the cycles of the work of reinforced concrete structures is the state of their repair and reconstruction, including the stages of strengthening the elements. There is a problem of strengthening of reinforced concrete columns. The article deals with the issue of reinforcing columns and other structural elements having a cylindrical surface, with polymeric composite materials in the form of carbon fiber lamellae. The use of composite materials allows to increase the service life and strength of reinforced concrete structures used in construction.

scholarly journals FLEXURAL REINFORCED CONCRETE ELEMENTS NORMAL SECTION BEARING CAPACITY EVALUATION IN FRACTURE STAGE

2017 ◽  
Vol 9 (2) ◽  
pp. 70-78 ◽  
Author(s):  
Justas SLAITAS ◽  
Zbynek HLAVAC ◽  
Arnoldas ŠNEIDERIS
Keyword(s):  
Tensile Strength ◽  
Reinforced Concrete ◽  
Bearing Capacity ◽  
Crack Depth ◽  
Experimental Studies ◽  
Concrete Structures ◽  
Assessment Process ◽  
Reinforced Concrete Structures ◽  
Compression Zone ◽  
Normal Section

This article examines flexural reinforced concrete structures condition assessment process in existing buildings on the stage where the reinforcement stress is between the yield and the tensile strength. The research is made on V. Jokūbaitis proposed methodology directly measuring the compression zone height, allowing us to evaluate the behavior of reinforced concrete beam fracture sufficiently precisely. This paper confirms the hypothesis that, when reinforcement reaches yielding stress, elastic strain dominates in concrete‘s compression zone and it is reasonable to use triangular concrete compression zone diagram, without tensile concrete above crack evaluation. The methodology of reinforced concrete structures bearing capacity assessment according to limit normal section crack depth is proposed. There is established connection between bending moments, when reinforcement achieve yielding stress and tensile strength, which allows us to decide about structures bearing capacity reserve. The results are confirmed with experimental studies and calculated values obtained by methodologies based on different reduced stress diagrams of concrete‘s compressive zone.

scholarly journals Investigation of the relationship between the strength limit and the long time fatigue of steel reinforcements of reinforced concrete structures

2021 ◽  
pp. 28-40
Author(s):  
Denys Chernyshev ◽  
Yulia Makarenko ◽  
Tetiana Khomutetska ◽  
Valeriy Makarenko
Keyword(s):  
Reinforced Concrete ◽  
Crack Resistance ◽  
Hydrogen Content ◽  
Experimental Studies ◽  
Concrete Structures ◽  
Reinforced Concrete Structures ◽  
Reinforcing Steel ◽  
Term Operation ◽  
Strength Limit

The results of experimental studies have shown a strong effect of diffusion hydrogen on the static and cyclic parameters of crack resistance of reinforcing steel. It was found that with increasing flooding, especially when the hydrogen content exceeds 5 cm3/100g, both static strength and long-term strength (fatigue) decrease sharply. Moreover, these areas of hydrogen solution in reinforcing steel are characterized by a viscous nature of fracture, while for heavily flooded reinforcement (from 5 to 12 cm3/100g) is characterized by brittle fracture by the mechanism of microcracking in the hardened (martensite or troostite structure). The analysis of the obtained experimental results allowed to determine the optimal hydrogen content in the reinforcing steel (3…5 cm3/100g), the excess of which can cause a decrease in the crack resistance of the reinforcement during long-term operation, especially in corrosive environments. The mechanism of hydrogen influence on crack resistance of metal at static and alternating loading which consists in diffusion and dislocation movement of hydrogen in structure of a reinforcing core that as a result that causes strong flooding of steel and its embrittlement is offered. It is established that carbon and low-alloy sieves, which are characterized by ferritic-pearlitic and sorbitol structure provide high resistance, especially to long-term fatigue, and the transition to steels with a structure of martensite or tempered (transient structure of bainite) structure of bainite sharply reduces reinforcing steel, which makes it impossible to use in the manufacture of reinforcement involved in reinforced concrete structures designed for long-term operation (more than 50…60 years). Thus, the obtained diagram can be recommended to designers of reinforced concrete structures for hydraulic purposes, as it greatly facilitates the reasonable choice of reinforcement in the development of reinforced concrete structures for responsible and long-term use.

Sign in / Sign up

Export Citation Format

Share Document