In Situ Investigation of Bulk Nucleation by X-Ray Diffraction

2004 ◽  
Vol 467-470 ◽  
pp. 81-86 ◽  
Author(s):  
A.W. Larsen ◽  
C. Gundlach ◽  
Henning Friis Poulsen ◽  
L. Margulies ◽  
Q. Xing ◽  
...  
Keyword(s):  
High Energy ◽  
Triple Junctions ◽  
X Ray Diffraction ◽  
Nucleation Kinetics ◽  
X Ray ◽  
Bulk Nucleation ◽  
In Situ Investigation ◽  
Cold Rolled ◽  
Non Destructive

A new method for in-situ studies of nucleation in bulk metals based on high energy synchrotron radiation is presented. Copper samples cold rolled 20% are investigated. The crystallographic orientations near triple junctions are characterized using non-destructive 3DXRD microscopy before, during, and after annealing for 1 hour at 290°C. This method allows in-situ identification of new nuclei and the deformed material, which spawns the nuclei. Also, since data is acquired during annealing nucleation kinetics can be studied.

In-situ investigation of quenching and partitioning by High Energy X-Ray Diffraction experiments

2017 ◽  
Vol 131 ◽  
pp. 15-18 ◽  
Author(s):  
S.Y.P. Allain ◽  
G. Geandier ◽  
J.C. Hell ◽  
M. Soler ◽  
F. Danoix ◽  
...  
Keyword(s):  
High Energy ◽  
X Ray Diffraction ◽  
Quenching And Partitioning ◽  
X Ray ◽  
In Situ Investigation

The In Situ Study on the Micro-Structural Characters of IF Steel at Early Stage of Recrystallization Using High-Energy X-Ray

2008 ◽  
Vol 575-578 ◽  
pp. 972-977
Author(s):  
He Tong ◽  
Yan Dong Liu ◽  
Q.W. Jiang ◽  
Y. Ren ◽  
G. Wang ◽  
...  
Keyword(s):  
Annealing Temperature ◽  
Early Stage ◽  
High Energy ◽  
Fiber Texture ◽  
Interstitial Free ◽  
If Steel ◽  
X Ray Diffraction ◽  
X Ray ◽  
Cold Rolled

High-energy synchrotron diffraction offers great potential for experimental study of recrystallization kinetics. A fine experimental design to study the recrystallization mechanism of Interstitial Free (IF) steel was implemented in this work. In-situ annealing process of cold-rolled IF steel with 80% reduction was observed using high-energy X-ray diffraction. Results show that, the diffraction intensity of {001}<110> and {112}<110> belong to α-fiber texture component decreased with the annealing temperature increased while {111}<110> did nearly not change and {111}<112> increased; the FMTH decreasing and d-space changing with annealing temperature increasing indicated that the residual stress relaxed completely during recovery.

In-situ Investigation of Bainite Formation with fast X-Ray Diffraction (iXRD)

2017 ◽  
Vol 72 (6) ◽  
pp. 355-364
Author(s):  
A. Kopp ◽  
T. Bernthaler ◽  
D. Schmid ◽  
G. Ketzer-Raichle ◽  
G. Schneider
Keyword(s):  
X Ray Diffraction ◽  
X Ray ◽  
In Situ Investigation

scholarly journals In-Situ High-Energy X-ray Diffraction Study of Austenite Decomposition During Rapid Cooling and Isothermal Holding in Two HSLA Steels

2021 ◽  
Vol 52 (5) ◽  
pp. 1812-1825
Author(s):  
Sen Lin ◽  
Ulrika Borggren ◽  
Andreas Stark ◽  
Annika Borgenstam ◽  
Wangzhong Mu ◽  
...  
Keyword(s):  
Isothermal Holding ◽  
Weight Percent ◽  
High Energy ◽  
Decomposition Kinetics ◽  
Bainitic Transformation ◽  
Austenite Decomposition ◽  
X Ray Diffraction ◽  
Rapid Cooling ◽  
X Ray

AbstractIn-situ high-energy X-ray diffraction experiments with high temporal resolution during rapid cooling (280 °C s−1) and isothermal heat treatments (at 450 °C, 500 °C, and 550 °C for 30 minutes) were performed to study austenite decomposition in two commercial high-strength low-alloy steels. The rapid phase transformations occurring in these types of steels are investigated for the first time in-situ, aiding a detailed analysis of the austenite decomposition kinetics. For the low hardenability steel with main composition Fe-0.08C-1.7Mn-0.403Si-0.303Cr in weight percent, austenite decomposition to polygonal ferrite and bainite occurs already during the initial cooling. However, for the high hardenability steel with main composition Fe-0.08C-1.79Mn-0.182Si-0.757Cr-0.094Mo in weight percent, the austenite decomposition kinetics is retarded, chiefly by the Mo addition, and therefore mainly bainitic transformation occurs during isothermal holding; the bainitic transformation rate at the isothermal holding is clearly enhanced by lowered temperature from 550 °C to 500 °C and 450 °C. During prolonged isothermal holding, carbide formation leads to decreased austenite carbon content and promotes continued bainitic ferrite formation. Moreover, at prolonged isothermal holding at higher temperatures some degenerate pearlite form.

Sign in / Sign up

Export Citation Format

Share Document