Texture Evolution during Recrystallization and Grain Growth in Non-Oriented Electrical Steel Produced by Compact Strip Production Process

Evolution of texture and α*-fiber texture formation mechanism of Fe-0.65%Si non-oriented electrical steel produced by Compact Strip Production (CSP) process during all the thermo-mechanical processing steps were investigated using electron backscatter diffraction (EBSD) and X-ray diffraction (XRD) techniques. Columnar crystal structure of cast slab is fine and well-developed. Textures of the hot-rolled band are quite different in the thickness direction. During annealing of cold-rolled sheet, γ-fiber texture grains would nucleate and grow preferentially, and α*-fiber texture grains mainly nucleate and grow in the shear zone of α-fiber texture of cold-rolled sheet. During the recrystallization process, γ-fiber texture gradually concentrated to {111}<112>, and γ and α*-fiber texture increased significantly. {111}<112> texture priority nucleation at the initial stage of recrystallization. Due to the advantages of nucleation position and quantity, the content of α*-fiber texture is greater than {111}<112> texture in the mid-recrystallization. During grain growth process, {111}<112> oriented grains would grow selectively by virtue of higher mobility, sizes and quantity advantages than that of {411}<148 > and {100}<120>, resulting in the gradual increase of γ-fiber texture and the decline of α *-fiber texture.

indexGIXS – software for visualizing and interactive indexing of grazing-incidence scattering data

Grazing incidence small- and wide-angle scattering (GISAXS, GIWAXS) are widely applied for the study of organic thin films, be it for the characterization of nanostructured morphologies in block copolymers, nanocomposites, or nanoparticle assemblies, or the packing and orientation of small aromatic molecules and conjugated polymers. Organic thin films typically are uniaxial powders, with specific crystallographic planes oriented parallel to the substrate surface. The associated fiber texture scattering patterns are complicated by refraction corrections and multiple scattering. We present an interactive graphics tool to index such patterns.

A novel mechanism to generate metallic single crystals

Generally, the evolution of metallic single crystals is based on crystal growth. The single crystal is either produced by growing a seed single crystal or by sophisticated grain selection processes followed by crystal growth. Here, we describe for the first time a fully new mechanism to generate single crystals based on thermo-mechanically induced texture formation during additive manufacturing. The single crystal develops due to two different mechanisms. The first step is a standard grain selection process due to directional solidification, leading to a pronounced fiber texture. The second and new mechanism bases on successive thermo-mechanically induced plastic deformations and texture formation in FCC crystals under compression. During this second step, the columnar grain structure transforms into a single crystal by rotation of individual grains. Thus, the single crystal forms step by step by merging the originally columnar grain structure. This novel, stress induced mechanism opens up completely new perspectives to fabricate single crystalline components and to accurately adjust the orientation according to the load.

Microstructural Features in Multicore Cu–Nb Composites

The study is devoted to heavily drawn multicore Cu–18Nb composites of cylindrical and rectangular shapes. The composites were fabricated by the melt-and-deform method, namely, 600 in situ rods of Cu–18%Nb alloy were assembled in a copper shell and cold-drawn to a diameter of 15.4 mm (e = 10.2) and then rolled into a rectangular shape the size of 3 × 5.8 mm (e = 12.5). The specimens were analyzed from the viewpoints of their microstructure, microhardness, and thermal stability. The methods of SEM, TEM, X-ray analysis, and microhardness measurements were applied. It is demonstrated that, at higher strain, the fiber texture <110>Nb <111>Cu DD (drawing direction), characteristic of this material, becomes sharper. The distortions of niobium lattice can be observed, namely, the {110} Nb interplanar distance is broadened in longitudinal direction of specimens and compacted in transverse sections. The copper matrix lattice is distorted as well, though its distortions are much less pronounced due to its recrystallization. Evolution of microstructure under annealing consists mainly in the coagulation of ribbon-like Nb filaments and in the vanishing of lattice distortions. The structural changes in Nb filaments start at 300–400 °С, then develop actively at 600 °С and cause considerable decrease of strength at 700–800 °С.

Electrospinning of Liquefied Banana Stem Residue in Conjugation with Hydroxyapatite Nanocrystals: Towards New Scaffolds for Bone Tissue Engineering

Electrospun fibers have high structural similarity to the extracellular matrix (ECM) of natural bone. Some researchers have tried to fabricate cellulose nanofibers using electrospinning method, although the fabricated fibers usually exhibited a non-uniform texture. Moreover, the fabricated mats always suffer from low biological, mechanical and structural properties. Thus, the objective of this study was first to produce a naturally occurring cellulose from banana pseudo-stem through the combination of liquefaction and bleaching processes. The native cellulose was then tried to electrospun in order to determine how a systematic approach based on a Taguchi L9 orthogonal array can be used to fabricate a defect-free fibrous mat. Finally, the electrospun cellulose mats incorporated with hydroxyapatite (HA) nanoparticles were fabricated to generate a new fibrous nanocomposite with enhanced biological and mechanical characteristics. The results revealed that among the electrospinning parameters, cellulose concentration of solution and applied voltage had the greatest effect on the morphology of the fibers. The morphological characterization of the fibrous nanocomposites showed that fibrous cellulose/HA mats had a uniform fiber texture without any significant bead, splashing or particle agglomeration. According to the mechanical tests, the samples containing the higher concentration of HA had a significantly higher elastic modulus and tensile strength. The results obtained from bioactivity analysis indicated an interesting morphological transformation into a flake-like structure which confirmed the high bioactivity of the scaffolds. Accordingly, encapsulation of HA nanoparticles inside the cellulose in the fibrous form can be promising for bone regeneration applications.

Automatic Unsupervised Fabric Defect Detection Based on Self-Feature Comparison

Due to the huge demand for textile production in China, fabric defect detection is particularly attractive. At present, an increasing number of supervised deep-learning methods are being applied in surface defect detection. However, the annotation of datasets in industrial settings often depends on professional inspectors. Moreover, the methods based on supervised learning require a lot of annotation, which consumes a great deal of time and costs. In this paper, an approach based on self-feature comparison (SFC) was employed that accurately located and segmented fabric texture images to find anomalies with unsupervised learning. The SFC architecture contained the self-feature reconstruction module and the self-feature distillation. Accurate fiber anomaly location and segmentation were generated based on these two modules. Compared with the traditional methods that operate in image space, the comparison of feature space can better locate the anomalies of fiber texture surfaces. Evaluations were performed on the three publicly available databases. The results indicated that our method performed well compared with other methods, and had excellent defect detection ability in the collected textile images. In addition, the visual results showed that our results can be used as a pixel-level candidate label.

Hot tensile deformation behavior and microstructure evolution of Mg-1Al-6Y alloy

In this study, the hot tensile test was carried out using the extruded and annealed Mg-1Al-6Y alloy. The effect of temperature and strain rate on the hot tensile deformation behavior of the alloy was systematically studied at different temperatures (200 ℃ ~ 350 ℃) and different strain rates (8×10-5 s-1 ~ 1.6×10-3 s-1). In addition, the effect of temperature on the evolution of microstructure when the strain rate is 1.6×10-3 s-1 was investigated. The results showed that as the temperature increased or the strain rate decreased, the peak stress decreased and the elongation increased. Hot tensile at different temperatures all increased the texture intensity, and the microstructure after deformation showed obvious characteristics of basal fiber texture ([0001]⊥ED). Correspondingly, the weaker [-15-40]//ED texture before deformation transformed into a stronger [01-10]//ED fiber texture. After deformation, the average Schmid factor (SF) of each non-basal slip was significantly increased compared with the average SF before deformation, indicating that abundant non-basal slip was activated during the deformation. When the deformation temperature was 300 °C, dynamic recrystallization (DRX) occurred significantly, and the DRXed grains accounted for 15.9%. DRX was a combination of continuous dynamic recrystallization (CDRX) and discontinuous dynamic recrystallization (DDRX). Furthermore, the calculated activation energy of the alloy was about 98.8 kJ/mol. Comprehensive research showed that the hot tensile deformation mechanism mainly included intragranular slip, grain boundary slip (GBS) and DRX.

The Effect of Extrusion Temperatures on Microstructure and Mechanical Properties of Mg-1.3Zn-0.5Ca (wt.%) Alloys

The present work mainly investigated the effect of extrusion temperatures on the microstructure and mechanical properties of Mg-1.3Zn-0.5Ca (wt.%) alloys. The alloys were subjected to extrusion at 300 °C, 350 °C, and 400 °C with an extrusion ratio of 9.37. The results demonstrated that both the average size and volume fraction of dynamic recrystallized (DRXed) grains increased with increasing extrusion temperature (DRXed fractions of 0.43, 0.61, and 0.97 for 300 °C, 350 °C, and 400 °C, respectively). Moreover, the as-extruded alloys exhibited a typical basal fiber texture. The alloy extruded at 300 °C had a microstructure composed of fine DRXed grains of ~1.54 µm and strongly textured elongated unDRXed grains. It also had an ultimate tensile strength (UTS) of 355 MPa, tensile yield strength (TYS) of 284 MPa, and an elongation (EL) of 5.7%. In contrast, after extrusion at 400 °C, the microstructure was almost completely DRXed with a greatly weakened texture, resulting in an improved EL of 15.1% and UTS of 274 MPa, TYS of 220 MPa. At the intermediate temperature of 350 °C, the alloy had a UTS of 298 MPa, TYS of 234 MPa, and EL of 12.8%.

Hetero-Epitaxial Growth of AlN Deposited by DC Magnetron Sputtering on Si(111) Using a AlN Buffer Layer

This paper reports the effect of Silicon substrate orientation and Aluminum nitride buffer layer deposited by molecular beam epitaxy on the growth of aluminum nitride thin films deposited by a DC magnetron sputtering technique at low temperatures. The structural analysis has revealed a strong (0001) fiber texture for both Si(100) and (111) substrates, and a hetero-epitaxial growth on a AlN buffer layer, which is only a few nanometers in size, grown by MBE onthe Si(111) substrate. SEM images and XRD characterization have shown an enhancement in AlN crystallinity. Raman spectroscopy indicated that the AlN film was relaxed when it deposited on Si(111), in compression on Si(100) and under tension on a AlN buffer layer grown by MBE/Si(111) substrates, respectively. The interface between Si(111) and AlN grown by MBE is abrupt and well defined, contrary to the interface between AlN deposited using PVD and AlN grown by MBE. Nevertheless, AlN hetero-epitaxial growth was obtained at a low temperature (<250 °C).