FEM Analysis on Thermoelectric Properties of Metal/TiO2–x Composites with Random Distribution of Metal Powder

2013 ◽  
Vol 750 ◽  
pp. 130-133
Author(s):  
Katsuhiro Sagara ◽  
Yun Lu ◽  
Dao Cheng Luan
Keyword(s):  
Thermal Conductivity ◽  
Electrical Resistivity ◽  
Seebeck Coefficient ◽  
Thermoelectric Properties ◽  
Power Factor ◽  
Figure Of Merit ◽  
Random Distribution ◽  
The Other ◽  
Dimensionless Figure Of Merit ◽  
Wide Range

Analysis model of finite element method with a random distribution for thermoelectric composites was built. Thermoelectric properties including electrical resistivity, Seebeck coefficient and thermal conductivity of M/TiO2–x (M = Cu, Ni, 304 stainless steel (304SS)) thermoelectric composites were investigated by the proposed model. Cu/TiO2–x composite showed a large decrease in electrical resistivity while 304SS/TiO2–x composite thermal conductivity was slightly increased. Calculated dimensionless figure-of-merit, ZT of Ni/TiO2–x composite was higher than those of TiO2–x and the other composites in a wide range of metal volume fractions because Ni has large absolute values of Seebeck coefficient, power factor and dimensionless figure-of-merit compared to the other two metals. It was found that power factor and dimensionless figure-of-merit of thermoelectric composites depended on the balance among electrical resistivity, thermal conductivity and Seebeck coefficient. The results revealed that it is important for M/TiO2–x composites to choose suitable addition metal with high power factor and dimensionless figure-of-merit.

The thermoelectric properties of CoSb3 compound doped with Te and Sn synthesized at different pressure

2017 ◽  
Vol 31 (28) ◽  
pp. 1750261 ◽  
Author(s):  
Yiping Jiang ◽  
Xiaopeng Jia ◽  
Hongan Ma
Keyword(s):  
Thermal Conductivity ◽  
High Pressure ◽  
Electrical Resistivity ◽  
High Temperature ◽  
Seebeck Coefficient ◽  
Thermoelectric Properties ◽  
Figure Of Merit ◽  
Raw Materials ◽  
Absolute Value ◽  
Dimensionless Figure Of Merit

The skutterudite CoSb[Formula: see text]Te[Formula: see text]Sn[Formula: see text] compound was synthesized successfully by high pressure and high temperature (HPHT) method using Co, Sb, Te and Sn powder as raw materials. The effects of pressure on its structure and the thermoelectric properties are investigated systematically from 300 K to 800 K. The electrical resistivity and the absolute value of the Seebeck coefficient for the sample increases with rising synthetic pressure. The thermal conductivity of the sample decreases with synthetic pressure and temperature rising in the range of 300–800 K. In this study, the maximum dimensionless figure of merit (ZT) value of 1.17 has been achieved at 793 K, 3 GPa for this thermoelectric material.

Thermoelectric Properties of Tl-X-Te (X=Pb, Sn, Ge) Systems

2005 ◽  
Vol 886 ◽  
Author(s):  
Atsuko Kosuga ◽  
Ken Kurosaki ◽  
Hiroaki Muta ◽  
Shinsuke Yamanaka
Keyword(s):  
Thermal Conductivity ◽  
Electrical Resistivity ◽  
Solid State ◽  
Electrical Properties ◽  
Seebeck Coefficient ◽  
Thermoelectric Properties ◽  
Figure Of Merit ◽  
Room Temperature ◽  
Lattice Thermal Conductivity ◽  
Dimensionless Figure Of Merit

ABSTRACTPolycrystalline-sintered samples of Tl2GeTe3, Tl4SnTe3, and Tl4PbTe3 were prepared by a solid-state reaction. Their thermoelectric properties were evaluated at temperatures ranging from room temperature to ca. 700 K by using the measured electrical resistivity (ρ), Seebeck coefficient (S), and thermal conductivity (κ). Despite their poor electrical properties, the dimensionless figure of merit ZT of all the compounds was relatively high, i.e., 0.74 at 673 K for Tl4SnTe3, 0.71 at 673 K for Tl4PbTe3, 0.29 at 473 K for Tl2GeTe3, due to the very low lattice thermal conductivity of the compounds.

Effects of alloying elements on thermoelectric properties of ReSi1.75

2003 ◽  
Vol 793 ◽  
Author(s):  
Min Wook Oh ◽  
Jia-Jun Gu ◽  
Kosuke Kuwabara ◽  
Haruyuki Inui
Keyword(s):  
Electrical Resistivity ◽  
Temperature Dependence ◽  
Thermoelectric Property ◽  
Thermoelectric Properties ◽  
Binary Alloy ◽  
Figure Of Merit ◽  
The Other ◽  
Alloying Elements ◽  
Dimensionless Figure Of Merit ◽  
Other Hand

ABSTRACTS:The thermoelectric properties as well as microstructure of binary and some ternary ReSi1.75 have been investigated. Binary ReSi1.75 exhibits a nice thermoelectric property as exemplified by the high value of dimensionless figure of merit (ZT) of 0.70 at 800 °C when measured along [001], although the ZT value along [100] is just moderately high. Mo substitution for Re in ReSi1.75 considerably increases the ZT value along [001] because of the decreased electrical resistivity, while the property improvement is not significant along [100]. On the other hand, Al and Ge substitutions for Si in ReSi1.75 considerably increase the ZT value along [100]. This is also because of the decreased electrical resistivity. When Al is added to ReSi1.75, the value of electrical resistivity is significantly reduced when compared to the binary counterpart and the temperature dependence of electrical resistivity changes from of semiconductor for the binary alloy to of metal for the Al-added alloys.

Preparation and Thermoelectric Properties of Bi-Doped Mg2Si Nanocomposites

2009 ◽  
Vol 66 ◽  
pp. 17-20 ◽  
Author(s):  
Mei Jun Yang ◽  
Wei Jun Luo ◽  
Qiang Shen ◽  
Hong Yi Jiang ◽  
Lian Meng Zhang
Keyword(s):  
Thermal Conductivity ◽  
Electrical Conductivity ◽  
Seebeck Coefficient ◽  
Thermoelectric Properties ◽  
Figure Of Merit ◽  
Dimensionless Figure Of Merit ◽  
Plasma Sintering ◽  
Spark Plasma ◽  
Heavy Doping ◽  
Nanocomposite Structures

Nanocomposites and heavy doping both are regarded as effective way to improve materials’ thermoelectric properties. 0.7at% Bi-doped Mg2Si nanocomposites were prepared by spark plasma sintering. Results of thermoelectric properties tests show that the doping of Bi atom effectively improves the electrical conductivity of Mg2Si，and the nanocomposite structures are helpful to reduce thermal conductivity and increase Seebeck coefficient, hence improving the thermoelectric performance. A maximum dimensionless figure of merit of 0.8 is obtained for the Bi-doped Mg2Si nanocomposite with 50 wt % nanopowder inclusions at 823K, about 63% higher than that of Bi-doped Mg2Si sample without nanopowder inclusions and 119% higher than that of microsized Mg2Si sample without Bi-doped, respectively.

Optimization of Thermoelectric Properties of Ni-Cu based Alloy through Combinatorial Approach

2007 ◽  
Vol 1044 ◽  
Author(s):  
Atsushi Yamamoto ◽  
Haruhiko Obara ◽  
Kazuo Ueno
Keyword(s):  
Seebeck Coefficient ◽  
Thermoelectric Properties ◽  
Power Factor ◽  
Figure Of Merit ◽  
Combinatorial Library ◽  
Parallel Synthesis ◽  
The Other ◽  
Material System ◽  
Combinatorial Approach ◽  
Large Power

AbstractThe thermoelectric properties of Ni1-xCux (0<x<1) alloy are measured from 323K to 950K. The sample with optimized composition, Ni70Cu30 is found to possess large power factor value of 0.012 Wm−1K−2 at around 950K. Estimated figure of merit value ZT is 0.21 for Ni50Cu50 and 0.18 for Ni70Cu30 at the same temperature. A novel attempt of high-throughput parallel synthesis using multiple-wells is carried out to test the feasibility of combinatorial approach in this material system. The Seebeck coefficient is visualized over the multiple-wells combinatorial library and the other Ni-Cu composition-spread, and it is proved that further enhancement of throughput could be possible by conducting systematic experiments based on the combinatorial approaches performed in this study.

Thermoelectric Properties of La-doped BaSi2 and (Ba,Sr)Si2 Solid Solutions

2007 ◽  
Vol 1044 ◽  
Author(s):  
Kohsuke Hashimoto ◽  
Ken Kurosaki ◽  
Hiroaki Muta ◽  
Shinsuke Yamanaka
Keyword(s):  
Thermal Conductivity ◽  
Solid Solution ◽  
Electrical Resistivity ◽  
Thermoelectric Properties ◽  
Figure Of Merit ◽  
Room Temperature ◽  
Dimensionless Figure Of Merit ◽  
Plasma Sintering ◽  
Spark Plasma ◽  
La Doped

AbstractWe studied the thermoelectric properties of BaSi2 and SrSi2. The polycrystalline samples were prepared by spark plasma sintering (SPS). The electrical resistivity (ρ), Seebeck coefficient (S), and thermal conductivity (κ) were measured above room temperature. The maximum values of the dimensionless figure of merit (ZT) were 0.01 at 954 K for BaSi2 and 0.09 at 417 K for SrSi2. We tried to enhance the ZT values of BaSi2 and SrSi2 by prepareing and characterizing La-doped BaSi2 and (Ba,Sr)Si2 solid solution.

Thermoelectric properties of the Al-TM-Si (TM = Mn, Re) 1/1-cubic approximant

2003 ◽  
Vol 805 ◽  
Author(s):  
Tsunehiro Takeuchi ◽  
Toshio Otagiri ◽  
Hiroki Sakagami ◽  
Uichiro Mizutani
Keyword(s):  
Thermal Conductivity ◽  
Electrical Resistivity ◽  
Thermoelectric Power ◽  
Thermoelectric Properties ◽  
Figure Of Merit ◽  
Room Temperature ◽  
Low Thermal Conductivity ◽  
Dimensionless Figure Of Merit

ABSTRACTThe electrical resistivity, thermoelectric power, and thermal conductivity were investigated for the Al71.6-xMn 17.4Six and Al71.6-xRe 17.4Six (7 ≤ x ≤ 12) 1/1-cubic approximants. A large thermoelectric power ranging from -40 to 90 μV/K and a low thermal conductivity less than 3 W/K·cm were observed at room temperatures. The electrical resistivity at room temperature for these approximants was kept below 4,000 μΩcm, that is much smaller than that in the corresponding quasicrystals. As a result of the large thermoelectric power, the low thermal conductivity, and the low electrical resistivity, large dimensionless figure of merit ZT = 0.10 (n-type) and 0.07 (p-type) were achieved for the Al71.6Re17.4Si11 and Al71.6Mn17.4Si11 at room temperature, respectively.

Effects of Oxygen-Reduction on Thermoelectric Properties of Sr0.61Ba0.39Nb2O6 Ceramics

2014 ◽  
Vol 787 ◽  
pp. 210-214 ◽  
Author(s):  
Yi Li ◽  
Jian Liu ◽  
Chun Lei Wang ◽  
Wen Bin Su ◽  
Yuan Hu Zhu ◽  
...  
Keyword(s):  
Thermal Conductivity ◽  
Electrical Resistivity ◽  
Oxygen Reduction ◽  
Thermoelectric Power ◽  
Thermoelectric Properties ◽  
Power Factor ◽  
Figure Of Merit ◽  
Thermoelectric Figure Of Merit ◽  
Thermoelectric Figure ◽  
Thermoelectric Power Factor

The thermoelectric properties of Sr0.61Ba0.39Nb2O6 ceramics, reduced in various conditions, were investigated in the temperature range from 323K to 1073K. Both the electrical resistivity and the absolute Seebeck coefficient decreased with the deepening degree of oxygen-reduction. However, the decrease of the electrical resistivity had a major influence on the thermoelectric power factor. Therefore, the more heavily reduced sample can gain the higher value of thermoelectric power factor. It has been observed that the thermal conductivity increased with the deepening degree of oxygen-reduction, which indicates that the scattering of the oxygen vacancies produced by reduction does not play a dominant role in the thermal conduction. In spite of the increase of the thermal conductivity, the oxygen-reduction still promoted the thermoelectric figure of merit via the increase of the thermoelectric power factor. And the most heavily reduced Sr0.61Ba0.39Nb2O6 ceramic has the highest thermoelectric figure of merit (~0.18 at 1073 K) among all the samples.

Enhanced Thermoelectric Properties of FeSbx Nanocomposites Through Stoichiometric Adjustment

2012 ◽  
Vol 1456 ◽  
Author(s):  
Mani Pokharel ◽  
Huaizhou Zhao ◽  
Kevin Lukas ◽  
Zhifeng Ren ◽  
Cyril Opeil
Keyword(s):  
Thermal Conductivity ◽  
Electrical Resistivity ◽  
Seebeck Coefficient ◽  
Carrier Concentration ◽  
Thermoelectric Properties ◽  
Power Factor ◽  
Hall Coefficient

ABSTRACTThe Seebeck coefficient, electrical resistivity, thermal conductivity and Hall coefficient of FeSbx (x = 2.04, 2.00, and 1.96) nanocomposites hot pressed at 300 °C were measured. The power factor of FeSb1.96 was increased by 105% compared to FeSb2. Hall coefficient measurements revealed a decreased carrier concentration and increased mobility in FeSb1.96 with an overall enhancement in ZTof 45% in FeSb1.96 .

scholarly journals Bipolar doping and thermoelectric properties of Zintl arsenide Eu5In2As6

2021 ◽  
Author(s):  
Naoki Tomitaka ◽  
Yosuke Goto ◽  
Kota Morino ◽  
Kazuhisa Hoshi ◽  
Yuki Nakahira ◽  
...  
Keyword(s):  
Thermal Conductivity ◽  
Electrical Resistivity ◽  
Thermoelectric Properties ◽  
High Performance ◽  
Figure Of Merit ◽  
Lattice Thermal Conductivity ◽  
High Resistivity ◽  
Dimensionless Figure Of Merit ◽  
Recent Developments ◽  
P Type

Zintl compounds exhibit promising thermoelectric properties because of the feasibility of the chemical tuning of their electrical and thermal transport. While most Zintl pnictides are known to show p-type polarity, recent developments in high-performance n-type Mg3Sb2-based thermoelectric materials have encouraged further identification of n-type Zintl pnictides. In this study, we demonstrate the bipolar dopability of the Zintl arsenide Eu5In2As6. The electrical resistivity at 300 K with n-type polarity was decreased to 7.6 x 10^-1 ohmcm using La as an electron dopant. In contrast to the relatively high resistivity of n-type Eu5In2As6, the p-type resistivity at 300 K was decreased to 5.9 x 10^-3 ohmcm with a carrier concentration of 2.8 x 10^20 /cm3 using Zn as a hole dopant. This doping asymmetry is discussed in terms of the weighted mobility of electrons and holes. Furthermore, a very low lattice thermal conductivity of 0.7 W/mK was observed at 773 K, which is comparable to that of the Sb-containing analogue Eu5In2Sb6. The dimensionless figure of merit ZT = 0.29 at 773 K for Zn-doped p-type Eu5In2As6. This study shows that bipolar dopable Eu5In2As6 can be a platform to facilitate a better understanding of the doping asymmetry in Zintl pnictides.

Sign in / Sign up

Export Citation Format

Share Document