Composition and Microstructure of Koryo Celadon in Korea

2014 ◽  
Vol 804 ◽  
pp. 139-142
Author(s):  
Kyung Nam Kim ◽  
Sung Jin Kim
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Calcium Oxide ◽  
Weight Ratio ◽  
Porcelain Body ◽  
Chemical Compositions ◽  
X Ray ◽  
Naked Eye ◽  
Scanning Electron

In this study, the characteristics of porcelain body, glaze and inlay were analyzed, using Koryo celadon shard of 10th-14thcentury. The characterization of celadon shard were investigated by Scanning electron microscopy, X-ray fluriscence, X-ray diffractometer, and Dilatometer. The characteristics of celadon shard is similar in color to gray-green with the naked eye, and the thickness of glaze layer and body is about 149.5-200μm and 4.2-8.8mm. The chemical compositions of body is SiO270.9-74.8wt%, Al2O319.4-20.5wt%, RO▪RO2(R=Ca, Mg, K) 4.0-7.0wt% and Fe2O31.3-2.7wt% in weight ratio. The high contents (12.5-24.6wt%) of calcium oxide in the glaze is considered lime type. In the chemical compositions of the white and black inlay Al2O3is 33.2-37.1wt% and 19.7wt%, and Fe2O3is 1.1wt% and 5.6wt% in weight ratio, respectively. The density of black inlay is higher than that of white inlay, and firing temperature for celadon may be about 1250°C.

Characterization of Diatomite, Leonardite and Pumice

2016 ◽  
Vol 872 ◽  
pp. 211-215 ◽  
Author(s):  
Pusit Pookmanee ◽  
Atit Wannawek ◽  
Sakchai Satienperakul ◽  
Ratchadapon Putharod ◽  
Nattapol Laorodphan ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Functional Group ◽  
Chemical Compositions ◽  
Carbonyl Groups ◽  
X Ray Diffraction ◽  
X Ray ◽  
Properties Of Materials ◽  
Scanning Electron

This research studies compositions of diatomite, leonardite and pumice for utilization appropriate to the properties of materials. Chemical compositions of these materials were characterized by X–ray fluorescence spectrometry (XRF) and energy dispersive X–ray spectrometry (EDXS). The silica was major component of these materials. The morphology was investigated by scanning electron microscopy (SEM). Diatomite was cylindrical in shape, leonardite was sheet or flake in shape and pumicewas prismatic in shape. The structure was studied by X–ray diffraction (XRD). It was found that the mineral composition of diatomite, leonardite and pumice showed cristobalite low, quartz and anorthite, respectively. The functional groups were identified by Fourier transform infraredspectrometry (FTIR). The functional group of siloxane was obtained and dominated vibration in these materials. And the vibration of carboxylic, alcoholic and carbonyl groups were obtained in leonardite.

scholarly journals Characterization of a Mahamayuri Vidyarajni Sutra excavated in Lu’an, China

2019 ◽  
Vol 7 (1) ◽  
Author(s):  
Liu Liu ◽  
Decai Gong ◽  
Zhengquan Yao ◽  
Liangjie Xu ◽  
Zhanyun Zhu ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Tang Dynasty ◽  
Optical Microscope ◽  
Lead White ◽  
Scientific Methods ◽  
X Ray ◽  
Micro Raman Spectroscopy ◽  
Scanning Electron

Abstract Historically, sutras played an important role in spreading Buddhist faith and doctrine, and today these remain important records of Buddhist thought and culture. A Mahamayuri Vidyarajni Sutra with polychrome paintings was found inside the cavity on top of the Nanmen Buddhist pagoda, built in the early Tang dynasty (618–627 CE) and located in Anhui Province, China. Textile was found on the preface which is strongly degraded and fragile. Unfortunately, the whole sutra is under severe degradation and is incomplete. Technical analysis based on scientific methods will benefits the conservation of the sutra. Optical microscopy (OM), micro-Raman spectroscopy combined with optical microscope (Raman), scanning electron microscopy in combination with energy dispersive X-ray analysis (SEM–EDS) and Fourier Transform Infrared Spectroscopy (FTIR) were used to characterize the pigment and gilded material, as well as the paper fiber and textile. Pigments such as cinnabar, minium, paratacamite, azurite, lead white were found. Gilded material was identified as gold. A five-heddle warp satin, made of silk, was found as the textile on the preface of the sutra. The sutra’s preface and inner pages were made of paper comprised of bamboo and bark. As a magnificent yet recondite treasure of Buddhism, the sutra was analyzed for a better understanding of the material. A conservation project of the sutra will be scheduled accordingly.

Preliminary Preparation and Characterization Studies of Cellulose from Merbau (Intsia bijuga)

2012 ◽  
Vol 620 ◽  
pp. 314-319
Author(s):  
Nur Amira Mamat Razali ◽  
Fauziah Abdul Aziz ◽  
Saadah Abdul Rahman
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Alkaline Treatment ◽  
Raw Material ◽  
X Ray Diffraction ◽  
X Ray ◽  
Preliminary Preparation ◽  
Characterization Studies ◽  
Scanning Electron

Hardwood is wood from angiosperm trees. The characteristic of hardwood include flowers, endosperm within seeds and the production of fruits that contain the seeds. This paper aims to discuss the preparation and characterization of cellulose obtained from hardwood. The hardwood Merbau (Intsia bijuga) was chosen as raw material in this study. Alkaline treatment and delignification methods were used for the preparation of cellulose. Acid hydrolysis was employed to produce cellulose nanocrystal (CNC). The treated and untreated samples were characterized using x-ray diffraction (XRD) and field emission scanning electron microscopy (FE-SEM). The final product, from both trated and untreated samples were then compared.

Hydrothermal Synthesis and Characterization of BiFeO3 Polyhedral Crystallites

2012 ◽  
Vol 174-177 ◽  
pp. 508-511
Author(s):  
Lin Lin Yang ◽  
Yong Gang Wang ◽  
Yu Jiang Wang ◽  
Xiao Feng Wang
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Synthesis And Characterization ◽  
X Ray Diffraction ◽  
Xrd Pattern ◽  
X Ray ◽  
Transmission Electron ◽  
Scanning Electron

BiFeO3 polyhedrons had been successfully synthesized via a hydrothermal method. The as-prepared products were characterized by power X-ray diffraction (XRD) pattern, scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The possible mechanisms for the formation of BiFeO3 polyhedrons were discussed. Though comparison experiments, it was found that the kind of precursor played a key role on the morphology control of BiFeO3 crystals.

Characterization of Al65.0Cu32.9Co2.1 Alloy Containing Nanofibres

2012 ◽  
Vol 186 ◽  
pp. 212-215
Author(s):  
Jacek Krawczyk ◽  
Włodzimierz Bogdanowicz ◽  
Grzegorz Dercz ◽  
Wojciech Gurdziel
Keyword(s):  
Electron Microscopy ◽  
Average Diameter ◽  
Chemical Compositions ◽  
X Ray ◽  
Transmission Electron ◽  
Orthogonal Set ◽  
T Phase ◽  
Terminal Area ◽  
Scanning Electron

Microstructure of terminal area of Al65Cu32.9Co2.1ingots (numbers indicate at.%), obtained via directional solidification was studied. Scanning Electron Microscopy, Transmission Electron Microscopy and X-ray powder diffraction were applied. Point microanalysis by Scanning Electron Microscope was used for examination of chemical compositions of alloy phases. It was found that tetragonal θ phase of Al2Cu stoichiometric formula was the dominate phase (matrix). Additionally the alloy contained orthogonal set of nanofibres of Al7Cu2Co T phase with the average diameter of 50-500 nm and oval areas of hexagonal Al3(Cu,Co)2H-phase, surrounded by monoclinic AlCu η1phase rim. Inside some areas of H-phase cores of decagonal quasicrystalline D phase were observed.

Characterization of a coating for radioprotection, by X-ray diffraction, scanning electron microscopy, and dispersive energy spectroscopy

2022 ◽  
Vol 321 ◽  
pp. 126326
Author(s):  
Gladis Aparecida Galindo Reisemberger de Souza ◽  
Ramón Sigifredo Cortés Paredes ◽  
Frieda Saicla Barros ◽  
Gustavo Bavaresco Sucharski ◽  
Sebastião Ribeiro Junior ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
X Ray Diffraction ◽  
X Ray ◽  
Scanning Electron

scholarly journals Mineralogical characterization of clay mineral assemblages from Rio de Janeiro pegmatites to identify kaolinite and/or halloysite deposits

Cerâmica ◽  
2020 ◽  
Vol 66 (380) ◽  
pp. 483-495
Author(s):  
V. M. J. Salgado-Campos ◽  
L. C. Bertolino ◽  
F. J. da Silva ◽  
J. C. Mendes
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Chemical Analysis ◽  
Rio De Janeiro ◽  
Mineralogical Characterization ◽  
X Ray ◽  
Mineral Assemblages ◽  
Saprolite Zone ◽  
Scanning Electron

Abstract This study reports the mineralogical characterization of kaolin occurrences in the State of Rio de Janeiro, Brazil, to identify new kaolinite and halloysite deposits. Samples were collected in 10 pegmatites with varying sizes for X-ray diffractometry, chemical analysis by X-ray fluorescence, and scanning electron microscopy studies. The results indicated that the kaolin occurrences were of weathered origin, wherein some places there were occurrences of tubular halloysite. Concerning the regolith stratigraphy, samples located in the saprock zone were found to contain kaolinite and/or halloysite contents from 0 to 10.1%, while those located in the saprolite zone contained kaolinite and/or halloysite contents from 16.3% to 34.9%. Kaolinite and/or halloysite-7Å were formed from plagioclase weathering instead of K-feldspar or mica, and the halloysite-7Å occurrence was related to samples in regions with a higher degree of weathering.

Sign in / Sign up

Export Citation Format

Share Document