Research of the Efficiency of the Fire Fighting Roof Composition for Cane

2019 ◽  
Vol 968 ◽  
pp. 61-67 ◽  
Author(s):  
Yuriy Tsapko ◽  
Olga P. Bondarenko ◽  
Aleksii Tsapko

Results of experimental researches about affectivity of firebiopotection products made from cane. Due to the unique properties of the cane, such as small volume weight, low thermal conductivity, rather high atmospheric resistance, high chemical resistance, the possibility of manufacturing parts at the site, efficiency, etc., cane products, despite the high pace of new technologies, are widely used in construction. Using cane in construction has a significant number of advantages, but needs protection from fire, from it produce a variety of products, equip the buildings. The unresolved issue of fire protection of products from such materials reduces the possibility of their use in construction. The experimental research on the determination of the fire-safety properties of the cane set the ignition of the raw sample, while for fire-proof - the process of ignition and propagation of the flame did not occur. Especially inhibition of the process of ignition and propagation of cane fire treated with a covering impregnation solution, which consist of fire retardants under the influence of temperature with the absorption of heat and the release of non-combustible gases (nitrogen, carbon dioxide), change in the direction of the expansion in the direction of formation of non-combustible gases and heavy-duty coke residue, reducing the combustion of the material and, accordingly, the index of flammability. This indicates the possibility of directed control of the processes of transfer of high temperature to organic material by using special covering compositions for cane products.

2021 ◽  
Vol 1167 ◽  
pp. 23-33
Author(s):  
Alaa A. Mohammed

Polyetheretherketone (PEEK) is a semicrystalline thermoplastic polymer with high chemical resistance, thermal stability and excellent mechanical properties. In the present work, neat PEEK and 3% bioactive glass/PEEK composites were annealed at various temperatures (100 °C, 200 °C and 300 °C) for (30 and 60) min and characterized with mechanical and density tests, differential scanning calorimetery and Fourier transform infrared spectroscopy. Results manifested bioactive glass powder enhanced the properties of the PEEK matrix. Thermal annealing at (200 and 300 °C) had a positive influence on the mechanical properties and density owing to increase in the level of crystallinity, whereas annealing at (100 °C) had not effect on the properties.


Author(s):  
Federico Fabriani ◽  
Giulia Lanzara

Abstract The excellent piezoelectric properties of Polyvinyl Fluoride (PVDF), its low cost, ease of workability and high chemical resistance, make it very useful to develop sensing devices for structural health monitoring applications (SHM). However, challenges occur when the devices need to be embedded into a hosting material or structure which could instead be damaged. In this study, the PVDF device is transformed into an ultralight and porous piezoelectric mat formed by ultra-long and randomly distributed micro fibers. The piezoelectric mat is embedded into a glass fiber (GF) composite by intercalating it with the GF layers during the lay-up process. This approach allows the realization of an intelligent composite that is capable to self-monitor its strain or vibrations during inservice life.


Nanoscale ◽  
2019 ◽  
Vol 11 (27) ◽  
pp. 12755-12773 ◽  
Author(s):  
Vikrant Yadav ◽  
Vaibhav Kulshrestha

Boron nitride (BN) is an exciting material and has drawn the attention of researchers for the last decade due to its surprising properties, including large surface area, thermomechanical stability, and high chemical resistance.


2018 ◽  
Vol 144 ◽  
pp. 02025 ◽  
Author(s):  
Suhas Yeshwant Nayak ◽  
Srinivas Shenoy Heckadka ◽  
Linto George Thomas ◽  
Anil Baby

Glass fibres have the principal advantages such as high tensile strength, high chemical resistance, low cost, and excellent insulating properties which makes them an important constituent in fibre reinforced plastic and composite industry. In this study, E-glass fibre in the form of Chopped Strand Mat (CSM) with different weight fractions such as 15%, 30%, and 45% were used as reinforcement in CNSL-epoxy resin composites. Fabrication of the composites was done by hand layup technique. Micro-hardness, tensile and flexural properties were investigated for all the composite panels of different compositions. The results clearly indicated an improvement in micro hardness, tensile and flexural properties with the increase in fibre content.


Author(s):  
Yuto Hashimoto ◽  
Shigetaka Otagiri ◽  
Hiroto Ogata ◽  
Satoshi Kamibayashi ◽  
Takafumi Endo ◽  
...  

2018 ◽  
Vol 31 (4) ◽  
pp. 547-553
Author(s):  
Yuto Hashimoto ◽  
Shigetaka Otagiri ◽  
Hiroto Ogata ◽  
Satoshi Kamibayashi ◽  
Ryuta Mizuochi ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document