Optimization of Welding Process Parameters in Novel Friction Stir Welding of Polyamide 66 Joints

2019 ◽  
Vol 969 ◽  
pp. 828-833 ◽  
Author(s):  
R. Nandhini ◽  
R. Dinesh Kumar ◽  
S. Muthukumaran ◽  
S. Kumaran
Keyword(s):  
Tensile Strength ◽  
Friction Stir Welding ◽  
Process Parameters ◽  
Welding Process ◽  
Polyamide 66 ◽  
Friction Stir ◽  
Response Characteristics ◽  
Tool Shoulder ◽  
Stereo Microscope ◽  
Friction Plate

The friction stir welding of polyamide 66 with a specially modified tool is studied. A variation of the conventional friction stir welding is investigated by incorporating a friction plate for the purpose of heating the polymer in the course of welding process through the tool shoulder. This in turn, improves the efficiency of the weld. The association of the welding process parameters and the weld performance has been investigated by the grey relational analysis with multi response characteristics like weld tensile strength, percent elongation and hardness. Macrostructure of the weld joint cross section has been explored by Stereo microscope. The maximum weld tensile strength of 63 MPa and a Shore hardness of 60 D at the weld nugget are obtained. The hardness profiles of the welded samples have been analyzed in this investigation.

Prediction and optimization of the mechanical properties of dissimilar friction stir welding of aluminum alloys using design of experiments

2016 ◽  
Vol 232 (8) ◽  
pp. 1384-1394 ◽  
Author(s):  
R Palanivel ◽  
RF Laubscher ◽  
S Vigneshwaran ◽  
I Dinaharan
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Friction Stir Welding ◽  
Aluminum Alloys ◽  
Ultimate Tensile Strength ◽  
Design Of Experiments ◽  
Process Parameters ◽  
Welding Process ◽  
Friction Stir ◽  
Friction Stir Welding Process

Friction stir welding is a solid-state welding technique for joining metals such as aluminum alloys quickly and reliably. This article presents a design of experiments approach (central composite face–centered factorial design) for predicting and optimizing the process parameters of dissimilar friction stir welded AA6351–AA5083. Three weld parameters that influence weld quality were considered, namely, tool shoulder profile (flat grooved, partial impeller and full impeller), rotational speed and welding speed. Experimental results detailing the variation of the ultimate tensile strength as a function of the friction stir welding process parameters are presented and analyzed. An empirical model that relates the friction stir welding process parameters and the ultimate tensile strength was obtained by utilizing a design of experiments technique. The models developed were validated by an analysis of variance. In general, the full impeller shoulder profile displayed the best mechanical properties when compared to the other profiles. Electron backscatter diffraction maps were used to correlate the metallurgical properties of the dissimilar joints with the joint mechanical properties as obtained experimentally and subsequently modeled. The optimal friction stir welding process parameters, to maximize ultimate tensile strength, are identified and reported.

Analysis of process parameters effects on underwater friction stir welding of aluminum alloy 6082-T6

2018 ◽  
Vol 233 (6) ◽  
pp. 1700-1710 ◽  
Author(s):  
Mohd Atif Wahid ◽  
Zahid A Khan ◽  
Arshad Noor Siddiquee ◽  
Rohit Shandley ◽  
Nidhi Sharma
Keyword(s):  
Tensile Strength ◽  
Aluminum Alloy ◽  
Friction Stir Welding ◽  
Process Parameters ◽  
Rotational Speed ◽  
Tool Rotational Speed ◽  
Friction Stir ◽  
Tool Shoulder ◽  
Underwater Friction Stir Welding ◽  
Optimal Setting

In friction stir welding of heat treatable aluminum alloys, the thermal cycles developed during the joining process result in softening of the joints which adversely affect their mechanical properties. Underwater friction stir welding can be a process of choice to overcome this problem due to low peak temperature and short dwell time involved during the process. Consequently, this article presents a study pertaining to the underwater friction stir welding of aluminum alloy 6082-T6 with an aim to develop a mathematical model to optimize the underwater friction stir welding process parameters for obtaining maximum tensile strength. The results of the study reveal that the tool shoulder diameter (d), tool rotational speed (ω), welding speed (v), and second-order term of rotational speed, that is, ω2, significantly affect the tensile strength of the joint. The maximum tensile strength of 241 MPa which is indeed 79% of the base metal strength and 10.7% higher than that of conventional (air) friction stir welding joint was achieved at an optimal setting of the underwater friction stir welding parameters, that is, tool rotational speed of 900 r/min, the welding speed of 80 mm/min, and a tool shoulder of 17 mm. The article also presents the results of temperature variation, the macrostructural and microstructural investigations, microhardness, and fractography of the joint obtained at the optimal setting for underwater friction stir welded (UFSWed) joint.

Multi Response Optimization of Submerged Friction Stir Welding Process Parameters Using TOPSIS Approach

2015 ◽  
Author(s):  
Senthil Kumar Velukkudi Santhanam ◽  
Lokesh Rathinaraj ◽  
Rathinasuriyan Chandran ◽  
Shankar Ramaiyan
Keyword(s):  
Friction Stir Welding ◽  
Process Parameters ◽  
Welding Process ◽  
Fusion Welding ◽  
Friction Stir ◽  
Friction Stir Welding Process ◽  
Response Characteristics ◽  
Response Optimization ◽  
Topsis Approach ◽  
Tool Pin

Friction stir welding (FSW) is a solid-state welding process which is used to join high-strength aircraft aluminum alloys and other metallic alloys which are difficult to weld by conventional fusion welding. In this paper, AA6063-O alloy of 6mm thickness was taken and friction stir welded under the water in order to improve the joint properties. The process parameters considered as rotational speed, welding speed and tool pin profiles (cylindrical, threaded and tapered) are optimized with multi response characteristics including hardness, tensile strength and % elongation. In order to solve a multi response optimization problem, the traditional Taguchi approach is insufficient. To overcome this constraint, a multi criteria decision making approach, namely, techniques for order preference by similarity to ideal solution (TOPSIS) is applied in the present study [13]. The optimal result indicates that the multi response characteristics of the AA6063-O during the submerged friction stir welding process can be enhanced through the TOPSIS approach. The Analysis of Variance (ANOVA) was carried out to investigate the significant parameter for the submerged friction stir welding process. The mechanical properties of the submerged FSW are compared with normal FSW joints.

scholarly journals Effect of process parameters on mechanical properties of AA5052 joints using underwater friction stir welding

2020 ◽  
Vol 14 (1) ◽  
pp. 6259-6271
Author(s):  
Srinivasa Rao Pedapati ◽  
Dhanish Paramaguru ◽  
Mokhtar Awang ◽  
Hamed Mohebbi ◽  
Sharma V Korada
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Friction Stir Welding ◽  
Process Parameters ◽  
Welding Process ◽  
Welding Parameters ◽  
Fracture Characterization ◽  
Friction Stir ◽  
Weld Joints ◽  
Underwater Friction Stir Welding

Underwater Friction Stir Welding (UFSW) is a solid-state joining technique which uses a non-consumable tool to weld metals. The objective of this investigation is to evaluate the mechanical properties of the AA5052 Aluminium alloy joints prepared by UFSW. The effect of different type of welding tools and welding parameters on the weld joint properties are studied. Square, tapered cylindrical and taper threaded cylindrical type of welding tools have been used to produce the joints with the tool rotational speed varying from 500 rpm to 2000 rpm while the welding speed varying from 50 mm/min to 150 mm/min. Tensile strength, micro-hardness distribution, fracture features, micro-and macrostructure of the fabricated weld joints have been evaluated. The effect of welding process parameters that influences the mechanical properties and fracture characterization of the joints are explained in detail. A maximum Ultimate Tensile Strength (UTS) value of 222.07 MPa is attained with a gauge elongation of 14.78%. Microstructural evaluation revealed that most of the fracture are found on the thermal mechanically affected zone (TMAZ)adjacent to the weld nugget zone (WNZ) due to bigger grain sizes. It is found that most of the joints exhibit ductile characteristics in failure. Fractography analysis has been used to find the behavior of weld joints in failure.

Multi-response optimization of friction stir welding process parameters for dissimilar joining of Al6101 to pure copper using standard deviation based TOPSIS method

2019 ◽  
Vol 233 (18) ◽  
pp. 6473-6482 ◽  
Author(s):  
Nidhi Sharma ◽  
Zahid A Khan ◽  
Arshad Noor Siddiquee ◽  
Mohd Atif Wahid
Keyword(s):  
Tensile Strength ◽  
Friction Stir Welding ◽  
Ultimate Tensile Strength ◽  
Process Parameters ◽  
Welding Speed ◽  
Welding Process ◽  
Micro Hardness ◽  
Friction Stir ◽  
Friction Stir Welding Process ◽  
Response Optimization

Friction stir welding is a new and effective solid-state welding process for joining dissimilar materials such as aluminum (Al) and copper (Cu). Joint quality of the friction stir welded materials gets influenced by the welding strategy and different friction stir welding process parameters, i.e. rotational speed, welding speed, tool design, tool pin offset, and tilt angle. In this paper, the effect of combination of different friction stir welding process parameters during joining of Al-6101 and pure copper is studied using Taguchi L18 orthogonal array. Four friction stir welding process parameters, i.e. shoulder diameter (A), pin offset (B), welding speed (C), and rotational speed (D) each at three levels except shoulder diameter, which is at two levels are selected. The effect of different combinations of these parameters on ultimate tensile strength and micro-hardness of the joints is investigated. Subsequently, single response optimization for ultimate tensile strength and micro-hardness and multi-response optimization of ultimate tensile strength and micro-hardness taken together is carried out to obtain the optimal combination of the friction stir welding process parameters. Taguchi method is used for single response optimization, whereas Taguchi-based TOPSIS method is employed for multi-response optimization. For single optimization, the optimum combination of the friction stir welding parameters yielding maximum strength and micro-hardness are A1B1C2D2 and A2B1C2D3, respectively. The optimum combination of the process parameters for multi-response optimization is A2B1C2D2. From the results of the study for single- and multi-response optimization, it is revealed that the rotational speed is the most significant process parameter affecting the tensile strength and micro-hardness of the joints followed by the welding speed. Further, the macro/microstructure and micro-hardness profile of the joint obtained at the optimal combination of the multi-response optimization are given and discussed for better understanding of material mixing and joining.

Sign in / Sign up

Export Citation Format

Share Document