Determination of the Load Carrying Capacity of Honeycomb Panels at Fixing Points under an External Load

2020 ◽  
Vol 299 ◽  
pp. 1184-1189
Author(s):  
V.V. Zhukov ◽  
Anton V. Eremin ◽  
D.V. Stepanec
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Finite Element Model ◽  
Carrying Capacity ◽  
External Load ◽  
Element Model ◽  
Load Carrying Capacity ◽  
The Finite Element Method ◽  
Load Carrying ◽  
Honeycomb Panel

In this article, the object of study is a three–layer honeycomb panel with fixing elements (FE), which are used for transporting the panel, and fixing it to the spacecraft. The goal of the work is to determine experimentally the load carrying capacity of the fixing elements under various types of loading, to determine the load carrying capacity of the honeycomb panel of the spacecraft at fixing points and further comparison of the experimental results with the finite element method results calculated by MSC.Patran / Nastran. A method for conducting static tests of fixing elements of a spacecraft honeycomb panel under an external load is described, a description of computer technology of a finite–element solution to the problem of static strength of a honeycomb panel structure in the MSC.Patran environment is presented, and a finite–element model of a honeycomb panel is designed. An assessment of the strength of a three–layer structure at fixing points was carried out, followed by validation of the finite–element model of a honeycomb panel. On the basis of the validated model, the evaluation of the strength of the honeycomb structure was carried out; based on results obtained, the conclusion has been made about the convergence of the results by the finite element method with the results obtained during the experiment.

SEARCH FOR THE MOST USEFUL GEOMETRY OF AN ACOUSTIC JOURNAL BEARING

Tribologia ◽  
2018 ◽  
Vol 273 (3) ◽  
pp. 15-66 ◽  
Author(s):  
Rafał GAWARKIEWICZ
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Computer Simulations ◽  
Carrying Capacity ◽  
Journal Bearing ◽  
Squeeze Film ◽  
Acoustic Levitation ◽  
Load Carrying Capacity ◽  
The Finite Element Method ◽  
Load Carrying

Computer simulations of a number of journal bearing’s geometries utilising acoustic levitation were carried out. The choice of the best geometry depended on the ability of a deformed shape, created by piezo-electric elements, to facilitate squeeze film ultrasonic levitation, and also to create three evenly distributed diverging aerodynamic gaps. Deformations of analysed variants of the bearing’s shape were generated by numerical simulations utilising the finite element method. For the chosen shapes of geometry, prototype bearings were made and their usefulness verified experimentally. As a result, the bearing with the highest load carrying capacity was identified.

Single-angle compression members welded by one leg to a gusset plate. II. A parametric study and design equation

1998 ◽  
Vol 25 (3) ◽  
pp. 585-594 ◽  
Author(s):  
Murray C Temple ◽  
Sherief SS Sakla
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Carrying Capacity ◽  
Load Carrying Capacity ◽  
Design Equation ◽  
Rigid Support ◽  
The Finite Element Method ◽  
Gusset Plate ◽  
Compression Members ◽  
Load Carrying

Single-angle compression members are complex members to analyze and design. The two generally accepted design procedures, the simple-column and the beam-column approaches, in general, underestimate the load-carrying capacity of single-angle compression members welded by one leg to a gusset plate fixed to a rigid support. One of the reasons is that these approaches do not properly account for the end constraint provided by the gusset plate. The effective length factor can be adjusted, but this is difficult to do as the end restraint is not easy to evaluate in many practical cases. Another reason is that these approaches are not based on a rational understanding of the failure mechanism of these members. An experimental program confirmed that the finite element method can be used, with a reasonable degree of accuracy, to predict the behavior and load-carrying capacity of single-angle compression members welded by one leg to a gusset plate fixed to a rigid support. The finite element method was used to study some 1800 different combinations of parameters. It was found that out-of-straightness, residual stresses in the angle section, Young's modulus of elasticity, and the unconnected gusset plate length do not have a great effect on the load-carrying capacity. The most significant parameter is the gusset plate thickness with the gusset plate width being the second most important parameter. An empirical design equation is proposed.Key words: angles, buckling, columns (structural), compressive resistance, design equation, gusset plates.

scholarly journals Axial Load-carrying Capacity of Steel Tubed Concrete Short Columns Confined with Advanced FRP Composites

2020 ◽  
Author(s):  
Ali Raza ◽  
Syyed Adnan Raheel Shah ◽  
Mudasser Muneer Khan ◽  
Faraz ul Haq ◽  
Hunain Arshad ◽  
...  
Keyword(s):  
Finite Element ◽  
Compressive Strength ◽  
Finite Element Model ◽  
Carrying Capacity ◽  
Axial Load ◽  
Element Model ◽  
Confined Concrete ◽  
Superior Performance ◽  
Load Carrying Capacity ◽  
Load Carrying

Fiber Reinforced Polymers (FRPs) have wide applications in the field of concrete construction due to their superior performance over conventional materials. This research focuses on the structural behavior of steel tube FRP jacket–confined concrete (STFC) columns under axial concentric loading and proposes a new empirical equation for predicting the axial load-carrying capacity of STFC columns having thickness of FRP-fabric ranging from 0.09 mm to 5.9 mm. A large database of 700 FRP-confined concrete specimens is developed with the detailed information of critical parameters, i.e. elastic modulus of FRPs (Ef), compressive strength of unconfined concrete (fc’o), diameter of specimen (D), height of specimen (H), total thickness of FRPs (N.tf), and the ultimate strength of confined concrete (fc’c). After the preliminary evaluation of constructed database, a new empirical model is proposed for the prediction of axial compressive strength of FRP-confined specimens using general regression analysis by minimizing the error functions such as root mean squared error (RMSE) and coefficient of determination (R2). The proposed FRP-confinement strength model presented higher accuracy as compared with previously proposed models. Finally, an equation is proposed for the predictions of axial load carrying capacity of STFC columns. For the validation of proposed equation, an extensive parametric study is performed using the proposed nonlinear finite element model (FEM). The FEM is calibrated using the load-deflection results of STFC columns from literature. A close agreement was observed between the predictions of proposed finite element model and proposed capacity equation.

Static Load Carrying Capacity in Four Contact Point Slewing Bearings: Theoretical and Preliminary Finite Element Calculations

2010 ◽  
Author(s):  
Josu Aguirrebeitia ◽  
Mikel Abasolo ◽  
Rafael Avile´s ◽  
Igor Fernandez de Bustos ◽  
Rube´n Ansola
Keyword(s):  
Finite Element ◽  
Theoretical Model ◽  
Finite Element Model ◽  
Carrying Capacity ◽  
Static Load ◽  
Contact Point ◽  
Element Model ◽  
Load Carrying Capacity ◽  
Load Carrying ◽  
Slewing Bearings

This paper presents a theoretical model to calculate the general static load-carrying capacity of four-contact-point slewing bearings under axial, radial and tilting-moment loads, compared with preliminary results obtained from a detailed parametric finite element model of the bearing. The theoretical model is based on a generalization of Sjova¨ll and Rumbarger’s equations and provides an acceptance surface in the load space. The finite element model is based on the modelization of the balls via nonlinear traction-only equivalent spring concept. The aim is to validate the theoretical model to be used as an acceptance curve generator for slewing bearing design.

scholarly journals Experimental and Numerical Analysis of Steel Joints in Round Wood

2014 ◽  
Vol 14 (2) ◽  
pp. 1-10 ◽  
Author(s):  
David Mikolášek ◽  
Antonín Lokaj ◽  
Jiří Brožovský ◽  
Oldřich Sucharda
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Numerical Analysis ◽  
Carrying Capacity ◽  
Load Carrying Capacity ◽  
The Finite Element Method ◽  
Geometrical Nonlinearities ◽  
Round Wood ◽  
Load Carrying ◽  
Steel Joints

Abstract The paper analyses a drawn steel joint in round logs for which several types of reinforcements have been proposed. The load-carrying capacity of the reinforcements have been tested in laboratories. At the same time, numerical modelling has been performed - it has focused, in particular, on rigidity of the joints during the loading process. Physical and geometrical nonlinearities have been taken into account. The Finite Element Method and 3D computation models have been used in the numerical calculations.

The Thermal Effect in Wheel and Rail during the Brake of Port Crane

2012 ◽  
Vol 487 ◽  
pp. 879-883
Author(s):  
Jiang Wei Wu
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Finite Element Model ◽  
Thermal Effect ◽  
Thermal Effects ◽  
Element Model ◽  
The Finite Element Method ◽  
Finite Element Software ◽  
Frictional Coefficients ◽  
The Finite Element Model

With the port crane getting bigger and heavier, and also moving much faster than before, the thermal effect in wheel and rail during the brake process can be a reason of the failure of port crane. In this paper, the thermal effect during the brake process of port crane is studied using the finite element method. Based on the finite element model, the ANSYS10.0 finite element software is used. The thermal effects under different coefficients are discussed. Three different slide speed of wheel, two different loads of crane, and three different frictional coefficients are applied. The importance of the different coefficients is obtained from the numerical results.

The Application of Multi-Wedge Cross Wedge Rolling Forming Long Shaft Technology

2011 ◽  
Vol 101-102 ◽  
pp. 1002-1005 ◽  
Author(s):  
Jing Zhao ◽  
Li Qun Lu
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Finite Element Model ◽  
Rolling Mill ◽  
Three Dimensional ◽  
Element Model ◽  
Solid Model ◽  
The Finite Element Method ◽  
Cross Wedge Rolling ◽  
The Finite Element Model

The process of multi-wedge cross wedge rolling is an advanced precision technology for forming long shaft parts such as automobile semi-axes. Three-dimensional solid model and the finite element model of semi-axes on automobile and dies of its cross wedge rolling were established. The process of cross wedge rolling was simulated according to the actual dimension of semi-axes on automobile utilizing the finite element method (FEM)software ANSYS/LS-DYNA. The required force parameters for designing semi-axes mill are determined. The appropriate roller width was determined according to the length and diameter of semi-axes on automobile. The results have provided the basis for the design of specific structure of automobile semi-axes cross wedge rolling mill.

Analysis of the Load-Carrying Capability of the Casing Plug Joint of Steel Tube Structures Considering the Contact Effect

2008 ◽  
Vol 33-37 ◽  
pp. 321-326 ◽  
Author(s):  
Xiu Gen Jiang ◽  
Yang Yang ◽  
Feng Jie Zhang ◽  
Jin San Ju ◽  
Xiao Chuan You
Keyword(s):  
Finite Element ◽  
Carrying Capacity ◽  
Element Model ◽  
Steel Tube ◽  
Nonlinear Finite Element ◽  
Tube Length ◽  
Load Carrying Capacity ◽  
Ansys Software ◽  
Load Carrying ◽  
Nonlinear Finite Element Model

Nonlinear finite element model analysis of the casing plug joints of steel tubular has been realized by ANSYS software. The law of load-carrying capability and stiffness of joint are separately gained by changing the ratio of length and diameter (R/L) and the ratio of the casing length and the main tube length (l/L). The influence of the casing thickness on the load-carrying capability and stiffness are also discussed. The results indicated that the load-carrying capability and stiffness of the joints both increase with the ratio(R/L) increment and the ratio of the casing length and main tube length (l/L). When the main tube thickness is equal to casing thickness, the load-carrying capacity of joints achieves the most.

scholarly journals Calculation Method for Load-Carrying Capacity of Circular Reinforced Con

2021 ◽  
Vol 353 ◽  
pp. 01013
Author(s):  
Tingwei Wang
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Reinforced Concrete ◽  
Carrying Capacity ◽  
Steel Tube ◽  
Experimental Result ◽  
Load Carrying Capacity ◽  
Model Method ◽  
Concrete Members ◽  
Load Carrying

Finite element method and fiber model method were used to calculate the load-carrying capacity of the specimens. Based on the experimental and theoretical analysis, simplified calculation method of the load-carrying capacity for this kind of member is proposed. It indicates that finite element method result is relatively small, fiber model method result accords well with the experimental result. Circular reinforced concrete members covered with steel tube presents both the characteristics of reinforced concrete and concrete filled steel tube member, showing higher load-carrying capacity and greater deformability. The load-carrying capacity of circular reinforced concrete members covered with steel tube can be calculated by the means of the method of reinforced concrete member with confined concrete. The result predicted by the simplified method is in good agreement with the experimental result.

Sign in / Sign up

Export Citation Format

Share Document