scholarly journals An Innovative Cerclage Wire Passer

2018 ◽  
Vol 09 (06) ◽  
pp. 197-202
Author(s):  
Hrishikesh Saodekar ◽  
Salphale Yogesh
Keyword(s):  
2021 ◽  
Vol 22 (1) ◽  
Author(s):  
Chao-Jui Chang ◽  
Wei-Ren Su ◽  
Kai-Lan Hsu ◽  
Chih-Kai Hong ◽  
Fa-Chuan Kuan ◽  
...  

Abstract Background Poor functional outcome can result from humeral greater tuberosity (GT) fracture if not treated appropriately. A two-screw construct is commonly used for the surgical treatment of such injury. However, loss of reduction is still a major concern after surgery. To improve the biomechanical strength of screw fixation in GT fractures, we made a simple modification of the two-screw construct by adding a cerclage wire to the two-screw construct. The purpose of this biomechanical study was to analyze the effect of this modification for the fixation of GT fractures. Materials and methods Sixteen fresh-frozen human cadaveric shoulders were used in this study. The fracture models were arbitrarily assigned to one of two fixation methods. Group A (n = 8) was fixed with two threaded cancellous screws with washers. In group B (n = 8), all screws were set using methods identical to group A, with the addition of a cerclage wire. Horizontal traction was applied via a stainless steel cable fixed directly to the myotendinous junction of the supraspinatus muscle. Displacement of the fracture fixation under a pulling force of 100 N/200 N and loading force to construct failure were measured. Results The mean displacements under 100 N and 200 N traction force were both significantly decreased in group B than in group A. (100 N: 1.06 ± 0.12 mm vs. 2.26 ± 0.24 mm, p < 0.001; 200 N: 2.21 ± 0.25 mm vs. 4.94 ± 0.30 mm, p < 0.001) Moreover, the failure load was significantly higher in group B compared with group A. (415 ± 52 N vs.335 ± 47 N, p = 0.01), Conclusions The current biomechanical cadaveric study demonstrated that the two-screw fixation construct augmented with a cerclage wire has higher mechanical performance than the conventional two-screw configuration for the fixation of humeral GT fractures. Trial registration Retrospectively registered.


2020 ◽  
Author(s):  
Nutchanat Thongchuea ◽  
Eakkachai Warinsiriruk ◽  
Noppakorn Phuraya ◽  
Paphon Sa-Ngasoongsong

2010 ◽  
Vol 71 (8) ◽  
pp. 470-471
Author(s):  
Charles A Willis-Owen ◽  
Matthew J Crocker ◽  
David K Martin

2019 ◽  
Vol 32 (06) ◽  
pp. 492-498 ◽  
Author(s):  
Sophie Boorman ◽  
Amy L. Johnson ◽  
Thomas P. Schaer ◽  
Marie-Eve Fecteau

Objective The aim of this study was to describe the signalment, clinical presentation, diagnostic findings, medical and surgical treatment and outcome of 22 farm animals diagnosed with a vertebral fracture or luxation. Study design Medical records of 22 farm animals (7 goats, 6 alpacas, 5 cattle, 3 sheep and 1 deer) were reviewed for signalment, history, presenting clinical signs and neurological examination findings, clinicopathological results, diagnostic imaging, final diagnosis, medical and surgical management, clinical progression and outcome. Results Animals' age ranged from 1 day to 15 years. Neurological examination findings included decreased motor function (20/22), recumbency (14/22), altered mentation (13/22), cranial nerve deficits (4/22) and lack of nociception (3/22). Lesions were localized to the atlanto-occipital region (2/22), C1 to C5 (7/22), C6 to T2 (4/22), T3 to L3 (3/22), and L4 to S1 (6/22). Diagnoses included vertebral fracture only (4/22), luxation only (5/22) or both vertebral fracture and luxation (13/22). In five cases, no therapy was attempted, while 12 cases were treated medically and five cases were treated surgically. Surgical interventions included manual reduction (n = 1); arthrodesis (n = 2); laminectomy (n = 1); and laminectomy with pin fixation, cerclage wire and polymethylmethacrylate bridging (n = 1). Five of the 22 cases survived to hospital discharge; two of these were treated surgically. Conclusion The cervical region was most commonly affected. Prognosis for these injuries in farm animals is guarded.


2018 ◽  
Vol 104 (3) ◽  
pp. 377-381 ◽  
Author(s):  
M. Ehlinger ◽  
L. Niglis ◽  
H. Favreau ◽  
S. Kuntz ◽  
G. Bierry ◽  
...  

2018 ◽  
Vol 63 (No. 5) ◽  
pp. 248-250
Author(s):  
R. Yaygingul ◽  
N. Kilic ◽  
B. Kibar

In this case report, we describe the clinical and radiological features of a calf mandibular symphyseal fracture and evaluate the treatment results. A 1.5-month-old male Holstein weighing 65 kg was presented to the Surgery Clinic, Faculty of Veterinary Medicine, Adnan Menderes University with a history of salivation and anorexia for three days. After clinical and radiographic assessments, a mandibular symphyseal fracture was determined. Stabilisation of the fracture region was achieved using cerclage wire with a continuous wire-loop technique under general anaesthesia. The cerclage wire was removed five weeks post-surgery. The calf was clinically healthy.


2006 ◽  
Vol 19 (03) ◽  
pp. 180-183 ◽  
Author(s):  
A. Martens ◽  
J. Declercq ◽  
S. Schauvliege ◽  
L. Weiland ◽  
F. Gasthuys ◽  
...  

SummaryThis paper reports the surgical treatment of a tibial fracture in a castrated adult male Belgian Landrace pig of 180 kg. The fracture was repaired using an intramedullary Steinmann pin, combined with cerclage wire and external transfixation. In contrast to other animal species, the fracture repair in the pig was hindered by the short and curved bones, the thick subcutaneous fat layer and the pronounced musculature. Postoperatively, the pig developed an osteomyelitis of the tibia due to pin tract contamination. Despite this complication, the fracture healed acceptably when all fixation material was removed two months after surgery. The infection resolved quickly and a satisfactory clinical result was obtained.


2014 ◽  
Vol 27 (02) ◽  
pp. 91-96 ◽  
Author(s):  
J. van der Zee

SummaryTo compare the in vitro biomechanical effects of single loop cerclage wires, an intramedullary pin and the combination thereof as applied to an oblique mid-diaphyseal osteotomy of canine tibiae.Three groups of nine bones with long oblique osteotomies were repaired with the following methods: 1) Three single loop cerclage wires and a transcortical skewer pin, 2) intramedullary pinning with a smooth Steinmann pin, and 3) a combination of both methods. The repaired constructs were tested in a single cycle four-point-bending test to failure. Load displacement curves were drawn and the following parameters were calculated or extrapolated: Stiffness, load at yield, and force resisted at 2 mm actuator displacement. The latter was determined to demonstrate the difference in the amount of energy absorbed between the different groups.The stiffness and force resisted at 2 mm displacement of the groups with cerclage wires were significantly higher than the group with an intramedullary pin alone (p ≤ 0.05). The differences in stiffness (p = 0.15) and force required at 2 mm displacement (p = 0.56) between cerclage wires and the combination of cerclage wires and intramedullary pins were not significant.Cerclage wire repair results in higher stiffness than repair with an intramedullary pin. When cerclage wires are combined with an intramedullary pin, the intramedullary pin does not provide protection to the cerclage wire repair and the wires or the bone under the wires has to fail before the pin resists significant load.


2011 ◽  
Vol 169 (10) ◽  
pp. 252-252 ◽  
Author(s):  
M. Rasekh ◽  
D. Devaux ◽  
J. Becker ◽  
A. Steiner

Sign in / Sign up

Export Citation Format

Share Document