Effect of Premixed Diesel Fumigation on Performance and Emissions Characteristics of Homogenous Charge Compression Ignition Engine

Author(s):  
S. Gowthaman ◽  
P. Sravan

The effect of premixed diesel fumigation (PDF) on performance and emissions characteristics of Homogenous Charge Compression Ignition (HCCI) engine and optimisation of the diesel fumigation temperature are prime focus of this study. The experimental investigations were carried on single cylinder, four stroke, water cooled, port injected Kirloskar SV1 engine. For this research, the engine was modified as HCCI engine with electric air heater, fixed at suction pipe. During the experimental investigation the diesel fuel was premixed by the port injector and vaporised or fumigated the fuel by heated suction air. After heating process, the diesel has changed its phase and mixed with air and form partially homogenous mixture. During the test, the engine was operated with different diesel fumigation temperature from 100C to 150C in steps of 10C and observed the performance and emissions characteristics of the engine. The effective diesel fumigation temperature for creating better homogeneous charge is identified. The diesel fumigation made huge impact on NOx and smoke formation. The level of NOx and smoke emissions were decreased simultaneously as 10% and 16% compared to compression ignition (CI) engine. At the same time, the HCCI engine has emitted high CO and HC emissions at low fumigation temperatures and they were reduced at high fumigation temperatures, because of improved combustion. The suction air temperatures of 120C and 130C for the HCCI engine registered low NOx and smoke emissions. From the performance point of view, the HCCI engine consumed much more fuel due to low volumetric efficiency and slightly affected the brake thermal efficiency.

RSC Advances ◽  
2015 ◽  
Vol 5 (43) ◽  
pp. 33863-33868 ◽  
Author(s):  
M. Jindal ◽  
P. Rosha ◽  
S. K. Mahla ◽  
A. Dhir

Experimental investigations were conducted to evaluate the effects of n-butanol in biodiesel–diesel blends on the performance and emissions characteristics of a constant speed, direct injection diesel engine.


Author(s):  
S. Gowthaman ◽  
A. Pakiya Pradeep

The purpose of this study is to analyse the effect of premixed diesel fumigation on the performance and emission characteristics of Homogeneous Charge Combustion Ignition (HCCI) engine and to optimize the diesel fumigation temperature. An experimental investigation was carried out on a single cylinder, four stroke, water cooled, port injected Kirloskar SVI engine. An electric air heater is fixed at the suction pipe. During the experimental study, the diesel fuel was premixed by port injector and get vaporized or fumigated by heated suction air. After the process of heating and premixing, the diesel has changed its phase and mixed with the air in the form of partially homogenous mixture. During the test, the engine was operated at different diesel fumigation temperature of 100 C, 110 C, 120 C, 130 C, 140 C and 150 C to assess the performance and emissions characteristics of the engine. It is observed that the diesel fumigation has made the huge impact on NOx and smoke formation. The emission of NOx and smoke were decreased simultaneously about 10% and 16% compared to the compression ignition engine. Moreover, this engine has produced high amount of CO and HC emissions at low fumigation temperature and also reduced the high fumigation temperature. The suction air temperatures of 120C and 130C operated under HCCI engine were found to produce lesser NOx and smoke emissions. Moreover, the engine fuel consumption was increased due to the low volumetric efficiency and also slightly affected the brake thermal efficiency.


Author(s):  
Y Ren ◽  
Z H Huang ◽  
D M Jiang ◽  
L X Liu ◽  
K Zeng ◽  
...  

The performance and emissions of a compression ignition engine fuelled with diesel/dimethoxymethane (DMM) blends were studied. The results showed that the engine's thermal efficiency increased and the diesel equivalent brake specific fuel consumption (b.s.f.c.) decreased as the oxygen mass fraction (or DMM mass fraction) of the diesel/DMM blends increased. This change in the diesel/DMM blends was caused by an increased fraction of the premixed combustion phase, an oxygen enrichment, and an improvement in the diffusive combustion phase. A remarkable reduction in the exhaust CO and smoke can be achieved when operating on the diesel/DMM blend. Flat NO x/smoke and thermal efficiency/smoke curves are presented when operating on the diesel/DMM fuel blends, and a simultaneous reduction in both NO x and smoke can be realized at large DMM addition. Thermal efficiency and NO x give the highest value at 2 per cent oxygen mass fraction (or 5 per cent DMM volume fraction) for the combustion of diesel/DMM blends.


Sign in / Sign up

Export Citation Format

Share Document