scholarly journals Production and evaluation of breakfast meal using blends of sorghum, bambara nut and date palm fruit flour

Agro-Science ◽  
2021 ◽  
Vol 20 (3) ◽  
pp. 30-36
Author(s):  
T.O. Olurin ◽  
E.S. Abbo ◽  
O.F. Oladiboye
Keyword(s):  
Proximate Composition ◽  
Date Palm ◽  
Pasting Properties ◽  
Sensory Properties ◽  
Composite Flour ◽  
Crude Fibre ◽  
Palm Fruit ◽  
Breakfast Meal ◽  
Sorghum Flour ◽  
Flour Blends

Breakfast meals are described as any food obtained with or without supplementation through swelling, roasting, grinding, rolling, or flaking of any cereal. This study is aimed to produce and evaluate the functional, pasting, proximate composition and sensory properties of a breakfast meal made from blends of sorghum, bambara and date flours. Gruels were made using composite flour (450 μm) in ratio of 80:15:5, 70:20:10, 60:25:5 and 100:0:0 for sorghum, bambara and date palm respectively. Samples were assessed for functional, pasting, proximate and sensory properties using standard procedures. Data were analyzed using ANOVA at p = 0.05. The functional properties of the flour blends were significantly (p = 0.05) affected by the increasing level of supplementation of bambara and date palm flour. There was a decrease in gelatinization temperature and viscosity as the level of supplementation of bambara nut and date palm flours increased. The gruel from 100% sorghum flour (control) had the highest pasting properties. Proximate composition of the gruels was as follows: moisture, 10.79-9.22%; crude protein, 4.50-10.37%; crude fat, 1.56-2.12%; ash, 2.86-1.76%; crude fibre, 0.10-0.88% and carbohydrate, 80.33-75.15%. Samples made from 60:25:15 flour blends showed significantly (p = 0.05) highest sensory qualities while gruel from 100% sorghum was lowest. The use of bambara nut and date palm fruits at various substitution levels in the formulation of sorghum breakfast gruel significantly (p = 0.05) enhanced their quality characteristics.

scholarly journals Effects of Fermented Maize Residue Addition on the Physico-chemical and Sensory Properties of Chin-Chin

2021 ◽  
pp. 65-73
Author(s):  
Owuno Friday ◽  
Achinewu Simeon Chituru
Keyword(s):  
Proximate Composition ◽  
Protein Digestibility ◽  
Pasting Properties ◽  
Absorption Capacity ◽  
Composite Flour ◽  
Crude Fibre ◽  
Overall Acceptability ◽  
Physico Chemical ◽  
Significant Difference ◽  
Pasting Temperature

Chin-Chin, a traditional Nigerian snack was prepared utilizing wheat-fermented maize residue composite flour at 0 – 30% replacement levels. Effects of this addition on the functional and pasting properties of the flour composite was evaluated. The snack produced was also evaluated for its sensory attributes, proximate composition and invitro-protein digestibility (IVPD). Functional properties results showed an increase in water absorption capacity (WAC), a decrease in oil absorption capacity (OAC), decrease in Bulk Density (BD), swelling power and solubility index with residue addition. Pasting property results showed a drop in the value of peak, trough, breakdown and final viscosity with substitution while set back viscosity increased.Peak temperature decreased, but values for pasting temperature showed no significant difference between the control and the blends. Results for sensory evaluation showed equal preference for overall acceptability. Proximate composition results showed residue addition led to an increase in crude fibre and protein content with a drop in the carbohydrate value. Residue addition did not increase protein digestibility. Addition of fermented maize residue in chin-chin production can be another way of utilizing the fibre rich by-product of the production of fermented maize starch.

scholarly journals QUALITY ATTRIBUTES OF PANCAKES FROM PEELED AND UNPEELED SWEETPOTATO FLOURS WITH CASSAVA STARCH

2020 ◽  
Vol 18 (1) ◽  
pp. 88-102
Author(s):  
A. T. OMIDIRAN ◽  
O. A. ADERIBIGBE ◽  
O. P. SOBUKOLA ◽  
O. O. AKINBULE
Keyword(s):  
Functional Properties ◽  
Proximate Composition ◽  
Control Sample ◽  
Quality Attributes ◽  
Cassava Starch ◽  
Absorption Capacity ◽  
Composite Flour ◽  
Crude Fibre ◽  
Overall Acceptability ◽  
Flour Blends

This study evaluated some quality attributes of pancakes from peeled and unpeeled sweetpotato flours and cassava starch. Cassava starch was substituted up to 30% of the total composite flour. The proximate composition, colour, carotenoid and functional properties of the different flour blends were determined. The flour blends were processed into pancakes and the proximate composition and sensory acceptability of the pancakes were determined. Data obtained were subjected to analysis of variance. The result showed that they were significant differences (p<0.05) in the functional properties of the flour blends. Bulk density, Water absorption capacity, Oil absorption capacity, swelling capacity ranged from 0.70 to 0.78 g/ml, 1.87 to 2.30 g/ml, 1.02 to 1.40 g/ml and 5.18% to 6.66%  respectively. There were significant differences (p<0.05) in the proximate composition of the pancake samples. The values ranged from 42.76 to 45.53%, 2.13 to 3.98%, 9.06 to 10.34%, 5.01 to 7.18%, 3.75 to 6.01% and 29.19 to 35.33% for moisture, ash, fat, protein, crude fibre and carbohydrate contents, respectively. Pancake produced from 100:0 peeled and unpeeled sweetpotato flour had the highest score for overall acceptability which can compare favorably, with pancakes from wheat flour which is the control sample. In conclusion, sweetpotato flour blended with cassava starch at different ratio gave good proximate and functional properties which resulted in pancakes of good quality attributes.    

Proximate composition, pasting and functional properties of composite flour blends from cassava and chia seeds flour

2021 ◽  
pp. 108201322110694
Author(s):  
Ashura Katunzi-Kilewela ◽  
Leonard MP Rweyemamu ◽  
Lilian D Kaale ◽  
Oscar Kibazohi ◽  
Roman M Fortunatus
Keyword(s):  
Functional Properties ◽  
Proximate Composition ◽  
Pasting Properties ◽  
Absorption Capacity ◽  
Composite Flour ◽  
Peak Time ◽  
Swelling Capacity ◽  
Pasting Temperature ◽  
Gelation Concentration ◽  
Flour Blends

The study established the proximate composition, pasting, and functional properties of cassava flour (CF) blended with chia seeds flour (CSF). Composite flour was prepared by blending CF with CSF in the ratios of 95:05, 90:10, 85:15, 80:20, and 75:25 with CF and CSF used as controls, respectively. The effect of blending significantly (p < 0.05) increased protein, fat, fibre, and ash contents as CSF increased. On other hand, moisture and carbohydrate contents decreased significantly. Pasting properties of composite flour blends decreased significantly (p < 0.05) as the incorporation of CSF increased and a noticeable change was observed for composite flour (75:25) except for peak time and pasting temperature. Functional properties of water absorption capacity (WAC) of CSF were significantly different with CF and composite flour blends. Oil absorption capacity (OAC) of CF and CSF were significantly different, while the composite flour blends had varied OAC due to the inclusion of the different amounts of CSF. The swelling capacity (SC) of CF and CSF were not significantly different, but composite flour blends were significantly different from both CSF and CF. The least gelation concentration (LGC) and bulk density (BD) increased significantly as chia seeds increased. Increased concentration of chia CSF in the composite flour blends showed to alter the functional properties. This study recommends composite flour 75:25 for processing semiliquid products like porridge due to reduced pasting properties values that may be associated with increased energy density compared to CF.

scholarly journals Proximate Composition and Sensory Properties of Complementary Food Formulated From Malted Pre-Gelatinized Maize, Soybean and Carrot Flours

2018 ◽  
Vol 7 (2) ◽  
pp. 17 ◽  
Author(s):  
Patience Chisa Obinna-Echem ◽  
Lucretia I Barber ◽  
Confidence I. Enyi
Keyword(s):  
Proximate Composition ◽  
Control Sample ◽  
Sensory Properties ◽  
Soy Flour ◽  
Crude Fibre ◽  
Overall Acceptability ◽  
Hedonic Scale ◽  
Flour Blends ◽  
Crude Fibre Content ◽  
Soy Flour Substitution

The nutrient and sensory properties of malted pre-gelatinized maize supplemented with varying amounts of soy and carrot flour was evaluated. The blends (Malted pre-gelatinized maize flour : Soy flour : Carrot flour) in grams were: A (80: 20: 0), B (73.125: 23.125: 3.75), C (66.250: 26.250: 7.50), D (65.625: 23.125:11.25), E (65: 20:15), F (63.125: 33.125: 3.75), G (63.125:25.625: 11.25), H (60: 25: 15) and I (100:0:0). There were significant (P ≤ 0.5) differences in the proximate composition of the blends. The moisture content ranged between 3.55 - 8.10%. The protein content of the samples increased (P ≤ 0.5) with the increase in soy substitution and varied from 11.61% for the control (sample I) to 21.53% for sample F. The fat, ash and crude fibre content of the blends varied from 1.68 - 10.86, 1.45 - 2.8 and 0.20 - 4.40% respectively. The control had significantly (P ≤ 0.5) the highest carbohydrate content of 75.61%, while it varied between 55.30 and 71.60 % for others. The energy values varied from 360.43 - 405.00 Kcal/g. The sensory scores were based on a 9-point hedonic scale, with 1 and 9 expressed as dislike extremely and like extremely. The assessors’ likeness for the sensory attributes (colour, texture, taste, aroma and general acceptability) was below neither like nor dislike. This study revealed that substitution with soybeans and carrot flours increased the nutrient composition of the malted pre-gelatinized maize, soybean and carrot flour blends. Particularly the soy flour as sample F with the highest soy flour substitution (33. 123g) had significantly the highest protein (21.53%), fat (10.86%) and energy (405 Kcal/g) values. This would be recommended for good quality porridge. Although, the sensory analysis revealed the need for further investigation on processing methods especially the malting process as to enhance the overall acceptability of the product. 

scholarly journals Wheat-Fenugreek Composite Flour Noodles: Effect on Functional, Pasting, Cooking and Sensory Properties

2018 ◽  
Vol 6 (1) ◽  
pp. 174-182 ◽  
Author(s):  
Sanju Bala Dhull ◽  
Kawaljit Singh Sandhu
Keyword(s):  
Water Solubility ◽  
Pasting Properties ◽  
Absorption Capacity ◽  
Composite Flour ◽  
Crude Fibre ◽  
Overall Acceptability ◽  
Solid Loss ◽  
Emulsion Capacity ◽  
Flour Blends ◽  
Texture Attributes

Composite flour noodles were prepared by blending fenugreek flour (FF) with wheat flour (WF) at a replacement level of 2%, 5%, 7% and 10%, respectively. The chemical, functional, and pasting properties of different flour blends were assessed to check its suitability for noodle making. FF exhibited significantly (p 0.05) high protein (28.5%), crude fibre (7.2%), fat (4.9%) and ash content (3.6%) as compared with WF. Water absorption capacity, water solubility index, oil absorption capacity, foaming capacity and emulsion capacity showed an increase in values while the peak viscosity of flour blends decreased with increase in the level of FF. The noodles prepared with wheat-fenugreek flour blends showed higher cooking time, water uptake and cooked weight but less gruel solid loss as compared with control (100% WF) noodles. Noodles prepared with 93% WF+7% FF scored a satisfactory overall acceptability score for their sensory characteristics. Therefore, noodles with satisfactory eating, cooking, texture attributes can be prepared incorporating fenugreek flour up to a level of 7%, helps in exploring the health benefits of fenugreek.

scholarly journals Proximate composition and functional properties of composite sorghum-okara flour and sensory evaluation of local snack product (sosa)

Agrosearch ◽  
2020 ◽  
Vol 20 (1) ◽  
pp. 158-167
Author(s):  
P.I. Uzo-Peters ◽  
S.T. Ola
Keyword(s):  
Moisture Content ◽  
Proximate Composition ◽  
Absorption Capacity ◽  
Partial Substitution ◽  
Composite Flour ◽  
Oil Absorption ◽  
Water Absorption Capacity ◽  
Nutritional Content ◽  
Sorghum Flour ◽  
Flour Blends

Partial substitution of cereals with legumes has the potential to improve the nutritional content, functionality and other properties of the composite flour. This study aimed at ascertaining the effect of partially substituting sorghum flour with okara flour and also to access the acceptability of a snack product, sosa, produced from the flour blends. The blends were produced from sorghum and okara flour using the following proportions respectively; 100:0; 90:10; 80:20; 70:30; and 60:40 with 100% sorghum serving as control. Results of the proximate composition of the flour blends showed an increase in protein (8.18%-22.73%), fat (1.7%-5.53%), crude fiber (2.9%-11.55%) and ash (1.72%- 2.83%), while the carbohydrate content decreased from (73.21% to 46.55%), with the moisture content varying between (10.81% and 12.41%). Bulk densities decreased with increase in okara substitution from 1g/ml to 0.72g/ml. The water absorption capacity and oil absorption capacity increased with increase in okara substitution from 278.67ml/100g to 328ml/100g and 177.33ml/100g to 249.33ml/100g respectively. The flour blends produced can all serve as thickeners and the local snack (sosa) produced from the flour blends was favourably accepted by the panelists. Keywords: Local snacks: supplementation: sorghum-okara: composite flour.

scholarly journals Evaluation of Various Properties of Amaranthus (Genus Amaranthus L.) Based Composite Flour Blends for Preparation of Gluten-Free Biscuits

2021 ◽  
Vol 13 (1) ◽  
pp. 57-68
Author(s):  
Muluken K. Kassa ◽  
Shimelis A. Emire
Keyword(s):  
Proximate Composition ◽  
Free Food ◽  
Quality Attributes ◽  
Pasting Properties ◽  
Absorption Capacity ◽  
Composite Flour ◽  
Gluten Free ◽  
Mineral Concentration ◽  
Composite Flours ◽  
Flour Blends

This research was conducted to investigate the pasting, rheological and functional properties, and gluten-free biscuit making potential of a composite flour prepared from grains of amaranthus, sorghum and finger millet. The formulation for the composite flour was obtained from D-optimal mixture design ratio using Design-Expert. The rheological and pasting properties of the composite flours were determined, while the proximate composition, physical dimensions, mineral concentration and sensory quality attributes of the biscuits were assessed. The results showed that there were significant (p&lt;0.05) differences in the pasting profile of the control and amaranthus based composites flour except for pasting temperature. Water absorption capacity and water soliblity index increased as the blending ratio of amaranthus flour increased, while oil absorption capacity decreased. The proximate composition evaluation 13.75, 2.04, 1.77 and 31.75% were found to be the highest values of the biscuit samples in terms of protein, crude fiber, ash and crude fat, respectively. Mineral analaysis was carried out and there was a significant (p&lt;0.05) difference in Fe, Ca, Zn and P content among the biscuit samples made from the composite flour blends. Similarly, the sensory evaluation indicated that there was a significant (p&lt;0.05) differences in apperance, colour, texture, flavour and overall acceptability among the composite biscuit samples. However, the difference was insignificant (p&lt;0.05) in crispiness of biscuit samples. In a nut shell this research revealed that a nutritionally dense gluten-free biscuits can be formulated without affecting the quality attributes of the biscuit. Thus, the composite flours can be used for the preparation of gluten free food products in africa, where the crops have not been effectively utilized in food processing industries.

scholarly journals Effect of Gum Arabic Incorporation on the Proximate Composition and Sensory Properties of Biscuits Produced from Flour Blends of Wheat and Water Yam

2020 ◽  
pp. 1-11
Author(s):  
M. A. H. China ◽  
U. C. Oguzor ◽  
A. E. Ujong
Keyword(s):  
Wheat Flour ◽  
Sensory Analysis ◽  
Proximate Composition ◽  
Control Sample ◽  
Gum Arabic ◽  
Sensory Properties ◽  
Composite Flour ◽  
Yam Flour ◽  
Flour Blends ◽  
Water Yam

The aim of this study was to evaluate the influence gum Arabic incorporation on the proximate composition and sensory properties of biscuits produced from flour blends of wheat and water yam. Water yam was processed into flour and used in composite with wheat flour for biscuit production. Two formulations A and B were produced from the mixture of wheat and water yam flour in the ratios of 50:50 and 30:70, respectively. The two formulations each were used to produce biscuits with different concentrations of gum Arabic (0%, 0.3% and 0.5%) and 100% wheat flour as control. Biscuit samples were subjected to proximate and sensory analysis using standard methods. Increase in the concentration of gum Arabic resulted to an increase in the moisture content (5.63-6.41% and 5.31-6.01%), crude fibre (1.13-1.95% and 2.22-3.40%) and carbohydrate contents (76.96-78.99% and 73.73-77.75%) for formulations A and B, respectively. A decrease in the ash content (3.11-2.85% and 4.60-2.78%), fat (5.35-2.56% and 5.62-2.51%) and protein content (7.82-7.24% and 8.52-8.05%) was also observed as the concentration of gum Arabic increased for formulations A and B, respectively. Result of the sensory analysis revealed that the control biscuit sample was more preferable for colour, taste, flavor, softness and general acceptability while biscuit samples containing 0.5% gum Arabic was more preferred for crispiness and hardness. The result also showed that the incorporation of gum Arabic led to increased sensorial attributes of wheat/water yam composite biscuits. The control sample and biscuit sample containing 30% water yam flour, 70% wheat flour and 0.5% gum Arabic were significantly similar for crispiness, hardness, softness and overall acceptability suggesting that gum Arabic can be incorporated at 0.5% into wheat and water yam composite flour at 70% and 30%, respectively for the production of acceptable and quality biscuits.

scholarly journals Effect of Supplementing Cassava with Okara on Biscuit Quality

2020 ◽  
pp. 99-105
Author(s):  
Makinde Folasade Maria ◽  
Abolade Esther Olaitan
Keyword(s):  
Pasting Properties ◽  
Composite Flour ◽  
Crude Fibre ◽  
Food Ingredients ◽  
Cassava Flour ◽  
Food Industries ◽  
Starchy Food ◽  
Significant Difference ◽  
Nutritional Advantage ◽  
Flour Blends

Okara is a nutritious by-product of soy milk industry; however it is discarded as industrial waste because it is perishable and other uses for it have not been fully identified. The feasibility of utilization of okara in food formulations was investigated. Five blends of composite flour were prepared by combining cassava flour with 10% to 50% of okara flour, respectively. The 100% cassava flour served as control. The functional and pasting properties of the flour blends as well as the chemical and sensory properties of biscuit samples were determined. Statistically significant (p≤0.05) difference in functional properties was observed between cassava flour supplemented with different levels of okara. The pasting properties showed that peak and final viscosities decreased with increase in level of okara flour in the blend. The biscuit samples had protein (4.7-11.9%), ash (1.63-2.17%), crude fibre (17.13-20.38%), fat (17.9- 23.4%), carbohydrate (34.9-53.0%) and energy (349.8-363.5 Kcal/g). Anti-nutritional components (oxalate, phytate and tannin) were significantly affected by inclusion of okara in the formulation. The sensorial characteristics of biscuits prepared from cassava and okara showed significant difference (p≤0.05) compared to the control. Cassava flour could be supplemented with okara flour up to 20% level in the production of biscuits with improved nutritional quality without affecting sensorial acceptability. The results from this study could be adopted by indigenous food industries that want to take the functional and nutritional advantage of okara flour to supplement starchy food ingredients.

scholarly journals The Evaluation of Pasting Properties of Whole Wheat and Whole Green Plantain Flour Blends and Quality Characteristics of Crackers Made from the Blends

2020 ◽  
Vol 2 (5) ◽  
Author(s):  
U. E. Inyang ◽  
V. P. Elijah
Keyword(s):  
Wheat Flour ◽  
Nutritive Value ◽  
Control Sample ◽  
Pasting Properties ◽  
Crude Fibre ◽  
Whole Wheat Flour ◽  
Overall Acceptability ◽  
Substitution Level ◽  
Whole Wheat ◽  
Flour Blends

The demand for food products with functional attributes is on the increase worldwide. The present study was aimed at evaluating the effect of supplementing whole wheat flour with 0, 10, 20, 30, 40 and 50% whole green plantain flour on pasting properties of the flour blends, proximate composition, minerals and sensory characteristics of crackers made from the blends. The 100% whole wheat flour served as the control sample. The result showed that the peak viscosity (PV), trough viscosity (TV), breakdown viscosity (BDV), final viscosity (FV) and setback viscosity (SBV) were significantly affected by the level of plantain flour substitution. The 20% plantain flour substitution level recorded the minimum PV (264.00RVU), TV (248.00RVU), FV (531.00RVU) and SBV (263.00RVU) while the 50% plantain flour substituted blend recorded the highest PV (362.00RVU), TV (328.00RVU) and FV (603.00RVU). The control sample recorded the highest SBV (312.00RVU) and least BDV (3.00RVU). The peak times for all the blended samples were the same (7 min) while the time for the control sample was 5 min. There was insignificant difference (P>0.05) in the pasting temperature which ranged from 91.30 – 92.80oC. The crude protein, fat and calcium contents progressively decreased while the ash, crude fibre, carbohydrate, K, Mg, Fe and Zn contents in the prepared crackers progressively increased with increase in the proportion of plantain flour substitution. Cracker prepared from the blend of 80% whole wheat and 20% whole green plantain flours was the most preferred by the sensory evaluation panellists in terms of taste, texture and overall acceptability. It is evident from the study that acceptable crackers of enhanced nutritive value could be produced from blend of 80% whole wheat and 20% whole green plantain flours. The use of flour from unpeeled plantain as ingredient in cracker production would eliminate waste generation and its associated environmental problems.

Sign in / Sign up

Export Citation Format

Share Document