Water-in-Oil-in-Water Double Emulsions as Protective Carriers for Sambucus nigra L. Coloring Systems

The use of natural colorants is needed to overcome consumer concerns regarding synthetic food colorants′ safety. However, natural pigments have, in general, poor stability against environmental stresses such as temperature, ionic strength, moisture, light, and pH, among others. In this work, water-in-oil-in-water (W1/O/W2) emulsions were used as protective carriers to improve color stability of a hydrophilic Sambucus nigra L. extract against pH changes. The chemical system comprised water and corn oil as the aqueous and oil phases, respectively, and polyglycerol polyricinoleate (PGPR), Tween 80, and gum Arabic as stabilizers. The primary emulsion was prepared using a W1/O ratio of 40/60 (v/v). For the secondary emulsion, W1/O/W2, different (W1/O)/W2 ratios were tested with the 50/50 (v/v) formulation presenting the best stability, being selected as the coloring system to test in food matrices of different pH: natural yogurt (pH 4.65), rice drink (pH 6.01), cow milk (pH 6.47), and soy drink (pH 7.92). Compared to the direct use of the extract, the double emulsion solution gave rise to higher color stability with pH change and storage time, as corroborated by visual and statistical analysis.

Effect of Gum Arabic and Starch-Based Coating and Different Polyliners on Postharvest Quality Attributes of Whole Pomegranate Fruit

This study investigated the effect of gum Arabic and starch-based coating and two polyliners (Liner 1-micro-perforated Xtend® and Liner 2-macro-perforated high-density polyethylene) on whole ‘Wonderful’ pomegranate fruit during cold storage (5 ± 1 °C and 95 ± 2% RH). Uncoated (UC) and coated (GAMS) fruit were packaged into standard open top ventilated cartons (dimensions: 0.40 m long, 0.30 m wide and 0.12 m high) with (GAMS + Liner 1, GAMS + Liner 2, UC + Liner 1 and UC + Liner 2) or without (UC and GAMS) polyliners. After 42 d, treatment GAMS + Liner 1 recorded the least weight loss (4.82%), whilst GAMS recorded lower (8.77%) weight loss than UC + Liner 2 (10.07%). The highest (24.74 mLCO2 kg−1h−1) and lowest (13.14 mLCO2 kg−1h−1) respiration rates were detected in UC and GAMS + Liner 1, respectively. The highest and lowest total soluble solids were recorded for GAMS (16.87 °Brix), and GAMS + Liner 1 (15.60 °Brix) and UC + Liner 1 (15.60 °Brix), respectively. Overall, no decay was detected for coated fruit packaged with either Liner 1 or Liner 2. Therefore, the combination of GAMS with Xtend® polyliners proved to be an effective treatment to maintain the quality of ‘Wonderful’ pomegranates during storage.

The Effects of a Gum Arabic-Based Edible Coating on Guava Fruit Characteristics during Storage

Guava is a nutritious fruit that has perishable behavior during storage. We aimed to determine the influences of some edible coatings (namely, cactus pear stem (10%), moringa (10%), and henna leaf (3%) extracts incorporated with gum Arabic (10%)), on the guava fruits’ properties when stored under ambient and refrigeration temperatures for 7, 14, and 21 days. The results revealed that the coating with gum Arabic (10%) only, or combined with the natural plant extracts, exhibited a significant reduction in weight loss, decay, and rot ratio. Meanwhile, there were notable increases in marketability. Moreover, among all tested treatments, the application of gum Arabic (10%) + moringa extract (10%) was the superior treatment for most studied parameters, and exhibited for the highest values for maintaining firmness, total soluble solids, total sugars, and total antioxidant activity. Overall, it was suggested that coating guava with 10% gum Arabic combined with other plant extracts could maintain the postharvest storage quality of the cold-storage guava.

Preparation of Electrochemical Supercapacitor Based on Polypyrrole/Gum Arabic Composites

The current research focused on the super capacitive behavior of organic conducting polymer, i.e., polypyrrole (PPy) and its composites with gum arabic (GA) prepared via inverse emulsion polymerization. The synthesized composites material was analyzed by different analytical techniques, such as UV-visible, FTIR, TGA, XRD, and SEM. The UV-Vis and FTIR spectroscopy clearly show the successful insertion of GA into PPy matrix. The TGA analysis shows high thermal stability for composites than pure PPy. The XRD and SEM analysis show the crystalline and amorphous structures and overall morphology of the composites is more compact and mesoporous as compared to the pure PPy. The electrochemical properties of modified solid state supercapacitors established on pure polypyrrole (PPy), polypyrrole/gum arabic (PPy/GA) based composites were investigated through cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS) and galvanostatic charge–discharge (GCD). The specific capacitance of the PPy modified gold electrode is impressive (~168 F/g). The specific capacitance of PPy/GA 1 electrode has been increased to 368 F/g with a high energy density and power density (~73 Wh/kg), and (~599 W/kg) respectively.