scholarly journals Electrolyzed Water and Its Application in the Food Industry

2008 ◽  
Vol 71 (9) ◽  
pp. 1934-1947 ◽  
Author(s):  
D. HRICOVA ◽  
R. STEPHAN ◽  
C. ZWEIFEL
Keyword(s):  
Reduction Potential ◽  
Food Products ◽  
Strict Adherence ◽  
Electrolyzed Water ◽  
Food Industries ◽  
Hygiene Practices ◽  
Oxidation Reduction ◽  
Oxidation Reduction Potential ◽  
Food Commodities ◽  
Vegetables And Fruits

Electrolyzed water (EW) is gaining popularity as a sanitizer in the food industries of many countries. By electrolysis, a dilute sodium chloride solution dissociates into acidic electrolyzed water (AEW), which has a pH of 2 to 3, an oxidation-reduction potential of >1,100 mV, and an active chlorine content of 10 to 90 ppm, and basic electrolyzed water (BEW), which has a pH of 10 to 13 and an oxidation-reduction potential of −800 to −900 mV. Vegetative cells of various bacteria in suspension were generally reduced by >6.0 log CFU/ml when AEW was used. However, AEW is a less effective bactericide on utensils, surfaces, and food products because of factors such as surface type and the presence of organic matter. Reductions of bacteria on surfaces and utensils or vegetables and fruits mainly ranged from about 2.0 to 6.0 or 1.0 to 3.5 orders of magnitude, respectively. Higher reductions were obtained for tomatoes. For chicken carcasses, pork, and fish, reductions ranged from about 0.8 to 3.0, 1.0 to 1.8, and 0.4 to 2.8 orders of magnitude, respectively. Considerable reductions were achieved with AEW on eggs. On some food commodities, treatment with BEW followed by AEW produced higher reductions than did treatment with AEW only. EW technology deserves consideration when discussing industrial sanitization of equipment and decontamination of food products. Nevertheless, decontamination treatments for food products always should be considered part of an integral food safety system. Such treatments cannot replace strict adherence to good manufacturing and hygiene practices.

scholarly journals Revamp of existing lab-scale electrolytic cell design for electrolyzed water study in cleaning application

Food Research ◽  
2020 ◽  
Vol 4 (S6) ◽  
pp. 146-149
Author(s):  
N.S. Sulaiman ◽  
N.I. Khalid ◽  
E.M.H. Fauzi ◽  
N. Ab Aziz ◽  
N.A. Yusof ◽  
...  
Keyword(s):  
Reduction Potential ◽  
Current Flow ◽  
Chemical Properties ◽  
Electrolytic Cell ◽  
Free Chlorine ◽  
Electrolyzed Water ◽  
Oxidation Reduction ◽  
Oxidation Reduction Potential ◽  
Alkaline Electrolyzed Water ◽  
Electrode Plate

The lab-scale electrolytic cell was designed to produce acidic and alkaline electrolyzed water for cleaning study. Electrolyzed water (EW) was produced by electrolysis of a dilute sodium chloride solution. The generation of free chlorine, pH and oxidation-reduction potential from the electrolysis process by the electrolytic cell were far from the expected value. Thus, the lab-scale electrolytic cell was revamped by using the acrylic slot to hold the electrode plate and a membrane holder without metal screws. This revamp work is to reduce the resistance for current flow with the aim to increase the value of chemical properties (pH, oxidation-reduction potential, free chlorine) for acidic and alkaline electrolyzed water. Findings have shown that the current was increased from 0.013A to 2.5A after the revamp process. As a result of the revamp, the value of pH, oxidationreduction potential and free chlorine for acidic electrolyzed water was increased by 1.7 times, 2.7 times, and 20 times higher than previous results respectively. While for alkaline electrolyzed water, the value of pH and oxidation-reduction potential was increased by 1.4 times and 6.2 times higher than previous results respectively.

Decontamination of Lettuce Using Acidic Electrolyzed Water

2001 ◽  
Vol 64 (5) ◽  
pp. 652-658 ◽  
Author(s):  
SHIGENOBU KOSEKI ◽  
KYOICHIRO YOSHIDA ◽  
SEIICHIRO ISOBE ◽  
KAZUHIKO ITOH
Keyword(s):  
Reduction Potential ◽  
Effective Means ◽  
Cellular Tissue ◽  
Coliform Bacteria ◽  
Aerobic Bacteria ◽  
Electrolyzed Water ◽  
Oxidation Reduction ◽  
Oxidation Reduction Potential ◽  
Alkaline Electrolyzed Water ◽  
Ozonated Water

The disinfectant effect of acidic electrolyzed water (AcEW), ozonated water, and sodium hypochlorite (NaOCl) solution on lettuce was examined. AcEW (pH 2.6; oxidation reduction potential, 1140 mV; 30 ppm of available chlorine) and NaOCl solution (150 ppm of available chlorine) reduced viable aerobes in lettuce by 2 log CFU/g within 10 min. For lettuce washed in alkaline electrolyzed water (AlEW) for 1 min and then disinfected in AcEW for 1 min, viable aerobes were reduced by 2 log CFU/g. On the other hand, ozonated water containing 5 ppm of ozone reduced viable aerobes in lettuce 1.5 log CFU/g within 10 min. It was discovered that AcEW showed a higher disinfectant effect than did ozonated water significantly at P < 0.05. It was confirmed by swabbing test that AcEW, ozonated water, and NaOCl solution removed aerobic bacteria, coliform bacteria, molds, and yeasts on the surface of lettuce. Therefore, residual microorganisms after the decontamination of lettuce were either in the inside of the cellular tissue, such as the stomata, or making biofilm on the surface of lettuce. Biofilms were observed by a scanning electron microscope on the surface of the lettuce treated with AcEW. Moreover, it was shown that the spores of bacteria on the surface were not removed by any treatment in this study. However, it was also observed that the surface structure of lettuce was not damaged by any treatment in this study. Thus, the use of AcEW for decontamination of fresh lettuce was suggested to be an effective means of controlling microorganisms.

scholarly journals In situ measurements of oxidation–reduction potential and hydrogen peroxide concentration as tools for revealing LPMO inactivation during enzymatic saccharification of cellulose

2021 ◽  
Vol 14 (1) ◽  
Author(s):  
Adnan Kadić ◽  
Anikó Várnai ◽  
Vincent G. H. Eijsink ◽  
Svein Jarle Horn ◽  
Gunnar Lidén
Keyword(s):  
Reduction Potential ◽  
Enzymatic Saccharification ◽  
The State ◽  
Enzyme Inactivation ◽  
Ex Situ ◽  
Process Economics ◽  
Complete Inactivation ◽  
Oxidation Reduction ◽  
Oxidation Reduction Potential

Abstract Background Biochemical conversion of lignocellulosic biomass to simple sugars at commercial scale is hampered by the high cost of saccharifying enzymes. Lytic polysaccharide monooxygenases (LPMOs) may hold the key to overcome economic barriers. Recent studies have shown that controlled activation of LPMOs by a continuous H2O2 supply can boost saccharification yields, while overdosing H2O2 may lead to enzyme inactivation and reduce overall sugar yields. While following LPMO action by ex situ analysis of LPMO products confirms enzyme inactivation, currently no preventive measures are available to intervene before complete inactivation. Results Here, we carried out enzymatic saccharification of the model cellulose Avicel with an LPMO-containing enzyme preparation (Cellic CTec3) and H2O2 feed at 1 L bioreactor scale and followed the oxidation–reduction potential and H2O2 concentration in situ with corresponding electrode probes. The rate of oxidation of the reductant as well as the estimation of the amount of H2O2 consumed by LPMOs indicate that, in addition to oxidative depolymerization of cellulose, LPMOs consume H2O2 in a futile non-catalytic cycle, and that inactivation of LPMOs happens gradually and starts long before the accumulation of LPMO-generated oxidative products comes to a halt. Conclusion Our results indicate that, in this model system, the collapse of the LPMO-catalyzed reaction may be predicted by the rate of oxidation of the reductant, the accumulation of H2O2 in the reactor or, indirectly, by a clear increase in the oxidation–reduction potential. Being able to monitor the state of the LPMO activity in situ may help maximizing the benefit of LPMO action during saccharification. Overcoming enzyme inactivation could allow improving overall saccharification yields beyond the state of the art while lowering LPMO and, potentially, cellulase loads, both of which would have beneficial consequences on process economics.

scholarly journals The Negative Impact of Varicocele on Basic Semen Parameters, Sperm Nuclear DNA Dispersion and Oxidation-Reduction Potential in Semen

2021 ◽  
Vol 18 (11) ◽  
pp. 5977
Author(s):  
Kamil Gill ◽  
Michal Kups ◽  
Patryk Harasny ◽  
Tomasz Machalowski ◽  
Marta Grabowska ◽  
...  
Keyword(s):  
Reduction Potential ◽  
Nuclear Dna ◽  
Study Groups ◽  
Semen Parameters ◽  
Sperm Dna Fragmentation ◽  
Control Groups ◽  
Infertile Men ◽  
Oxidation Reduction ◽  
Oxidation Reduction Potential ◽  
Sperm Dna

Since varicocele is so common in infertile men, this study intends to analyse the relationships between varicocele and conventional semen characteristics, sperm nuclear DNA dispersion and oxidation-reduction potential (ORP) in semen. Varicocele-positive and varicocele-negative infertile men (study groups) showed significantly lower standard sperm parameters and higher sperm DNA fragmentation (SDF) and ORP in semen than healthy volunteers and subjects with proven fertility (control groups). A lower proportion of low SDF levels (0–15% SDF) and higher incidence of high SDF levels (>30% SDF), as well as a higher prevalence of high ORP values (>1.37 mV/106 sperm/mL), were found in the study groups vs. the control groups. Moreover, infertile men had significantly lower odds ratios (ORs) for low SDF levels and significantly higher ORs for high SDF levels and high ORP. SDF and ORP were negatively correlated with sperm number, morphology, motility and vitality. Furthermore, a significant positive correlation was found between SDF and ORP. The obtained results suggest that disorders of spermatogenesis may occur in varicocele-related infertility. These abnormalities are manifested not only by reduced standard semen parameters but also by decreased sperm DNA integrity and simultaneously increased oxidative stress in semen.

Sign in / Sign up

Export Citation Format

Share Document