scholarly journals Seismic tomography of the Gulf of Corinth: a comparison of methods

1997 ◽  
Vol 40 (1) ◽  
Author(s):  
E. Le Meur ◽  
J. Virieux ◽  
P. Podvin

At a local scale, travel-time tomography requires a simultaneous inversion of earthquake positions and velocity structure. We applied a joint iterative inversion scheme where medium parameters and hypocenter parameters were inverted simultaneously. At each step of the inversion, rays between hypocenters and stations were traced, new partial derivatives of travel-time were estimated and scaling between parameters was performed as well. The large sparse linear system modified by the scaling was solved by the LSQR method at each iteration. We compared performances of two different forward techniques. Our first approach was a fast ray tracing based on a paraxial method to solve the two-point boundary value problem. The rays connect sources and stations in a velocity structure described by a 3D B-spline interpolation over a regular grid. The second approach is the finite-difference solution of the eikonal equation with a 3D linear interpolation over a regular grid. The partial derivatives are estimated differently depending on the interpolation method. The reconstructed images are sensitive to the spatial variation of the partial derivatives shown by synthetic examples. We aldo found that a scaling between velocity and hypocenter parameters involved in the linear system to be solved is important in recovering accurate amplitudes of anomalies. This scaling was estimated to be five through synthetic examples with the real configuration of stations and sources. We also found it necessary to scale Pand S velocities in order to recover better amplitudes of S velocity anomaly. The crustal velocity structure of a 50X50X20 km domain near Patras in the Gulf of Corinth (Greece) was recovered using microearthquake data. These data were recorded during a field experiment in 1991 where a dense network of 60 digital stations was deployed. These microearthquakes were widely distributed under the Gulf of Corinth and enabled us to perform a reliable tomography of first arrival P and S travel-times. The obtained images of this seismically active zone show a south/north asymmetry in agreement with the tectonic context. The transition to high velocity lies between 6 km and 9 km indicating a very thin crust related to the active extension regime.At a local scale, travel-time tomography requires a simultaneous inversion of earthquake positions and velocity structure. We applied a joint iterative inversion scheme where medium parameters and hypocenter parameters were inverted simultaneously. At each step of the inversion, rays between hypocenters and stations were traced, new partial derivatives of travel-time were estimated and scaling between parameters was performed as well. The large sparse linear system modified by the scaling was solved by the LSQR method at each iteration. We compared performances of two different forward techniques. Our first approach was a fast ray tracing based on a paraxial method to solve the two-point boundary value problem. The rays connect sources and stations in a velocity structure described by a 3D B-spline interpolation over a regular grid. The second approach is the finite-difference solution of the eikonal equation with a 3D linear interpolation over a regular grid. The partial derivatives are estimated differently depending on the interpolation method. The reconstructed images are sensitive to the spatial variation of the partial derivatives shown by synthetic examples. We aldo found that a scaling between velocity and hypocenter parameters involved in the linear system to be solved is important in recovering accurate amplitudes of anomalies. This scaling was estimated to be five through synthetic examples with the real configuration of stations and sources. We also found it necessary to scale Pand S velocities in order to recover better amplitudes of S velocity anomaly. The crustal velocity structure of a 50X50X20 km domain near Patras in the Gulf of Corinth (Greece) was recovered using microearthquake data. These data were recorded during a field experiment in 1991 where a dense network of 60 digital stations was deployed. These microearthquakes were widely distributed under the Gulf of Corinth and enabled us to perform a reliable tomography of first arrival P and S travel-times. The obtained images of this seismically active zone show a south/north asymmetry in agreement with the tectonic context. The transition to high velocity lies between 6 km and 9 km indicating a very thin crust related to the active extension regime.

2018 ◽  
Vol 7 (3.7) ◽  
pp. 51
Author(s):  
Maria Elena Nor ◽  
Norsoraya Azurin Wahir ◽  
G P. Khuneswari ◽  
Mohd Saifullah Rusiman

The presence of outliers is an example of aberrant data that can have huge negative influence on statistical method under the assumption of normality and it affects the estimation. This paper introduces an alternative method as outlier treatment in time series which is interpolation. It compares two interpolation methods using performance indicator. Assuming outlier as a missing value in the data allows the application of the interpolation method to interpolate the missing value, thus comparing the result using the forecast accuracy. The monthly time series data from January 1998 until December 2015 of Malaysia Tourist Arrivals were used to deal with outliers. The results found that the cubic spline interpolation method gave the best result than the linear interpolation and the improved time series data indicated better performance in forecasting rather than the original time series data of Box-Jenkins model. 


2018 ◽  
Vol 2018 ◽  
pp. 1-11 ◽  
Author(s):  
Ning Li ◽  
Xianqing Lv ◽  
Jicai Zhang

A new method for the estimation of initial conditions (ICs) in a PM2.5 transport adjoint model is proposed in this paper. In this method, we construct the field of ICs by interpolating values at independent points using the surface spline interpolation. Compared to the traditionally used linear interpolation, the surface spline interpolation has an advantage for reconstructing continuous smooth surfaces. The method is verified in twin experiments, and the results indicate that this method can produce better inverted ICs and less simulation errors. In practical experiments, simulation results show good agreement with the ground-level observations during the 22nd Asia-Pacific Economic Cooperation summit period, demonstrating that the new method is effective in practical application fields.


2020 ◽  
Vol 5 (1) ◽  
pp. 31-36
Author(s):  
Lina Lina ◽  
Kelly Anthony

The over time role of technology becomes very important. That is because the function of technology is to facilitate human work. Because human needs are increasingly complex, technological developments are created in such a way as to meet human needs. The experts in the medical field are currently very dependent on technology to do their jobs, in order to obtain effective and efficient results. Application system designed aims to help experts in the medical field to diagnose diseases through introduction to white blood cell types. The recognition system was developed using the Nearest Feature Line (NFL) method. In this NFL method, characteristic lines are formed using the method of linear interpolation, linear spline, quadratic spline, and cubic spline. Aside from introducing an introduction system, this paper also discusses comparisons between interpolation methods to form characteristic lines. The test was carried out using FTI Untar Pattern Recognition laboratory blood cell data. The test results show that the formation of characteristic lines using the linear interpolation method provides better recognition results compared to the spline interpolation method.


2012 ◽  
Vol 57 (4) ◽  
pp. 921-932 ◽  
Author(s):  
Masoud Soleymani Shishvan ◽  
Javad Sattarvand

Abstract In this paper a new method of modeling variable slope angles has been presented based on the spline interpolation method. Slope angle modeling and defining precedency of the blocks are the vital parts of almost any open pit optimization algorithm. Traditionally heuristic patterns such as 1:5 or 1:9 have been used to generate slope angles. Cone template based models were later employed in developing variable slope angles. They normally use a linear interpolation process for determination of slope angles between the given directions which leads to sharp and non-realistic pits. The other elliptical alternatives suffer from having limitations in defining slope angles in non-geographical directions. The method is capable to consider any number of slope angles in any desired direction as well as creating quite accurate and realistic pit shapes. Three major types of the spline interpolation including cubic, quadratic and cardinal are tested, however, the cubic form is preferred due to more realistic outcomes. Main steps of the method are described through a numerical case study.


2020 ◽  
Vol 5 (1) ◽  
pp. 31-36
Author(s):  
Lina Lina ◽  
Kelly Anthony

In English, The over time role of technology becomes very important. That is because the function of technology is to facilitate human work. Because human needs are increasingly complex, technological developments are created in such a way as to meet human needs. The experts in the medical field are currently very dependent on technology to do their jobs, in order to obtain effective and efficient results. Application system designed aims to help experts in the medical field to diagnose diseases through introduction to white blood cell types. The recognition system was developed using the Nearest Feature Line (NFL) method. In this NFL method, characteristic lines are formed using the method of linear interpolation, linear spline, quadratic spline, and cubic spline. Aside from introducing an introduction system, this paper also discusses comparisons between interpolation methods to form characteristic lines. The test was carried out using FTI Untar Pattern Recognition laboratory blood cell data. The test results show that the formation of characteristic lines using the linear interpolation method provides better recognition results compared to the spline interpolation method. Dalam Bahasa Indonesia, Seiring berjalannya waktu peran teknologi menjadi sangat penting. Hal itu disebabkan karena fungsi dari teknologi yaitu mempermudah perkerjaan manusia. Karena kebutuhan manusia semakin kompleks, maka perkembangan teknologi diciptakan sedemikian rupa untuk memenuhi kebutuhan manusia. Para tenaga ahli dalam bidang kedokteran pun saat ini sangat bergantung pada teknologi dalam melakukan pekerjaannya, guna memperoleh hasil yang efektif dan efisien. Sistem aplikasi yang dirancang bertujuan untuk membantu ahli dalam bidang medis untuk mendiagnosis penyakit melalui pengenalan terhadap jenis sel darah putih. Sistem pengenalan yang dikembangkan menggunakan metode Nearest Feature Line (NFL). Dalam metode NFL ini, garis ciri dibentuk menggunakan metode interpolasi linier, spline linier, spline kuadratik, dan spline kubik. Selain melakukan sistem pengenalan, makalah ini juga membahas perbandingan antara metode interpolasi untuk membentuk garis ciri. Pengujian dilakukan dengan menggunakan data sel darah laboratorium Pattern Recognition FTI Untar. Hasil pengujian menunjukkan bahwa pembentukan garis ciri menggunakan metode interpolasi linier memberikan hasil pengenalan yang lebih baik dibandingkan dengan metode interpolasi spline.


Symmetry ◽  
2020 ◽  
Vol 13 (1) ◽  
pp. 52
Author(s):  
Tongtong Liu ◽  
Lingli Cui ◽  
Chao Zhang

The turn domain resampling (TDR) method is proposed in the paper on the basis of the existing angle domain resampling for solving the problem of non-fixed fault frequency under variable working conditions. TDR can select the appropriate sampling order according to the influence of frequency conversion, which avoided the error caused by the spline interpolation method. It can provide accurate parameters for the subsequent calculation of the equivalent frequency order. Variable multi-scale morphological filtering (VMSMF) method is proposed for the purpose of further reducing the interference of noise in resampling signal to feature extraction. VMSMF adaptively selects structural elements according to the parameter change of impact signal to make its scale more targeted. It only needs to calculate once using the optimal structural unit for a particular impact, and the filtering accuracy and operating efficiency have been greatly improved. The main steps of this article are as follows. First, the TDR is used to resample the original signal as to get the resampling signal which is still submerged by the strong noise. In the second step, VMSMF is used to filter the resampling signal to obtain the signal with less noise interference. Finally, the fault characteristics of the filtering signal was extracted and compared with the possible fault frequency calculated by the sampling parameters provided by resampling, so as to determine the fault type of the planetary gearbox. By analyzing the simulation signal and the experimental signal respectively, this method can find out the corresponding fault characteristics effectively.


Author(s):  
Junsang Yoo ◽  
Taeyong Lee ◽  
Pyungsik Go ◽  
Yongseok Cho ◽  
Kwangsoon Choi ◽  
...  

In the American continent, the most frequently used alternative fuel is ethanol. Especially in Brazil, various blends of gasoline–ethanol fuels are widely spread. The vehicle using blended fuel is called flexible fuel vehicle. Because of several selections for the blending ratios in gas stations, the fuel properties may vary after refueling depending on a driver’s selection. Also, the combustion characteristics of the flexible fuel vehicle engine may change. In order to respond to the flexible fuel vehicle market in Brazil, a study on blended fuels is performed. The main purpose of this study is to enhance performance of the flexible fuel vehicle engine to target Brazilian market. Therefore, we investigated combustion characteristics and optimal spark timings of the blended fuels with various blending ratios to improve the performance of the flexible fuel vehicle engine. As a tool for prediction of the optimal spark timing for the 1.6L flexible fuel vehicle engine, the empirical equation was suggested. The validity of the equation was investigated by comparing the predicted optimal spark timings with the stock spark timings through engine tests. When the stock spark timings of E0 and E100 were optimal, the empirical equation predicted the actual optimal spark timings for blended fuels with a good accuracy. In all conditions, by optimizing spark timing control, performance was improved. Especially, torque improvements of E30 and E50 fuels were 5.4% and 1.8%, respectively, without affecting combustion stability. From these results, it was concluded that the linear interpolation method is not suitable for flexible fuel vehicle engine control. Instead of linear interpolation method, optimal spark timing which reflects specific octane numbers of gasoline–ethanol blended fuels should be applied to maximize performance of the flexible fuel vehicle engine. The results of this study are expected to save the effort required for engine calibration when developing new flexible fuel vehicle engines and to be used as a basic strategy to improve the performance of other flexible fuel vehicle engines.


2012 ◽  
Vol 2012 ◽  
pp. 1-22 ◽  
Author(s):  
Fenling Feng ◽  
Dan Lan ◽  
Liuwen Yang

A synergy evolutionary model of the collecting, distributing, and transporting system of railway heavy haul transportation is built by introducing synergy-related concepts and applying synergy evolutionary theory. Then spline interpolation method, numerical differential five-point formula, and method of least squares are used to solve synergistic coefficient, while fourth-order Rugge-kutta method and fourth-order Adams linear implicit formula method are used to solve coevolutionary curve of the system. Finally, the heavy load transportation of Daqin Railway is an example of the empirical analysis. The research result shows that the degree of order of the system and its three subsystems—collecting, transporting, and distributing—increases as the synergetic coefficient of the subsystems increases; otherwise, the degree of the order will decrease. It also shows that this model can better analyze the coevolutionary process of the heavy load collecting, distributing, and transporting system of Daqin Railway, with its rationality and applicability verified.


2014 ◽  
Vol 2014 ◽  
pp. 1-8
Author(s):  
Feng-Gong Lang ◽  
Xiao-Ping Xu

We mainly present the error analysis for two new cubic spline based methods; one is a lacunary interpolation method and the other is a very simple quasi interpolation method. The new methods are able to reconstruct a function and its first two derivatives from noisy function data. The explicit error bounds for the methods are given and proved. Numerical tests and comparisons are performed. Numerical results verify the efficiency of our methods.


Sign in / Sign up

Export Citation Format

Share Document