Hybrid Chirp Signal Design for Improved Long-Range (LoRa) Communications

Long-range (LoRa) communication has attracted much attention recently due to its utility for many Internet of Things applications. However, one of the key problems of LoRa technology is that it is vulnerable to noise/interference due to the use of only up-chirp signals during modulation. In this paper, to solve this problem, unlike the conventional LoRa modulation scheme, we propose a modulation scheme for LoRa communication based on joint up- and down-chirps. A fast Fourier transform (FFT)-based demodulation scheme is devised to detect modulated symbols. To further improve the demodulation performance, a hybrid demodulation scheme, comprised of FFT- and correlation-based demodulation, is also proposed. The performance of the proposed scheme is evaluated through extensive simulation results. Compared to the conventional LoRa modulation scheme, we show that the proposed scheme exhibits over 3 dB performance gain at a bit error rate of 10−4.

Designing a Mouse for Disabilities Using the MPU-6050 Sensor with the Kalman Filter Method as a Noise Reducer

Problems that are often faced by people with physical disabilities are those who have limited hands, one of which is when they will use the computer. His inability to grip and use the mouse is often a barrier in using the computer. The purpose of the design of the tool is to provide facilities for people with disabilities to be able to use a mouse that will be moved based on head movements without noise interference caused by the MPU-6050 sensor. The results of the tests carried out show that designing a mouse with the MPU-6050 sensor has been successfully carried out, the MPU-6050 sensor by implementing a kalman filter as a noise reducer on the X axis has an accuracy value with an average error percentage of 0.09% and at Y angle is 0.12%. Data transmission from the mouse to the computer is done wirelessly using bluetooth HC-05 can receive data well as far as 12.5 meters with an error percentage of 0%. The button on the mouse that functions to perform the left click function when the button is bitten 1x, right click when the button is bitten 2x and click and hold to do a left click 2x or double click can run according to the command, has a 100% success rate.

Influence of Analog-To-Digital Conversion and Decimation Parameters on the Signal-To-Noise Ratio in the Radar Path

Introduction. The digital representation of received radar signals has provided a wide range of opportunities for their processing. However, the used hardware and software impose some limits on the number of bits and sampling rate of the signal at all conversion and processing stages. These limitations lead to a decrease in the signal-to-interference ratio due to quantization noise introduced by powerful components comprising the received signal (interfering reflections; active noise interference), as well as the attenuation of a low-power reflected signal represented by a limited number of bits. In practice, the amplitude of interfering reflections can exceed that of the signal reflected from the target by a factor of thousands.Aim. In this connection, it is essential to take into account the effect of quantization noise on the signal-tointerference ratio.Materials and methods. The article presents expressions for calculating the power and power spectral density (PSD) of quantization noise, which take into account the value of the least significant bit of an analog-to-digital converter (ADC) and the signal sampling rate. These expressions are verified by simulating 4-, 8- and 16-bit ADCs in the Mathcad environment.Results. Expressions are derived for calculating the quantization noise PSD of interfering reflections, which allows the PSD to be taken into account in the signal-to-interference ratio at the output of the processing chain. In addition, a comparison of decimation options (by discarding and averaging samples) is performed drawing on the estimates of the noise PSD and the signal-to-noise ratio.Conclusion. Recommendations regarding the ADC bit depth and sampling rate for the radar receiver are presented.

Leak location procedure based on the complex-valued FastICA blind deconvolution algorithm for water-filled branch pipe

Water pipe networks have a large number of branch joints. Branch joint shunting generates vortices in the fluid, which excite the pipe wall to produce a type of branch noise. The branch noise is coupled with the leak source signal through the pipe. Here, a novel leak location protocol based on the complex-valued FastICA method (C-FastICA) is proposed to address the leak location problem under the branch noise interference. The C-FastICA, a complex-value domain blind deconvolution algorithm, effectively extended the cost function, constraint function, and iteration rules of the instantaneous linear FastICA into the complex-valued domain. The C-FastICA method was used to realize the separation of branch noise and leak source signal. The experimental results showed that the separation efficiency of the C-FastICA was higher than that of time-domain blind convolution separation (T-BCS). Furthermore, the relative location error of the C-FastICA method to the leak point was less than 14.238%, which was significantly lower than in traditional T-BCS and direct cross-correlation (DCC) technology.

A multiscale kernel-based network with improved attention mechanism for rotating machinery fault diagnosis under noisy environment

Considering the vibration signals are easily contaminated by the strong and highly non-stationary noise, extracting more sensitive and effective features from the noised vibration signals is still a great challenge for intelligent fault diagnosis of rotating machinery. This paper proposed a multiscale kernel-based network with improved attention mechanism (IA-MKNet) to overcome this challenge. In the proposed method, an improved attention mechanism (IAM) for multiscale convolution is firstly developed to adaptively extract the meaningful fault features and automatically suppress noise. Then, due to the inherent multiple time characteristics of vibration signals, an adaptive multiscale kernel-based residual block (AMKRB) with IAM is designed to capture fault features in multi-time scales of vibration signals. Finally, a combination strategy based on an adaptive ensemble learner is proposed to increase the diversity of features by fusing the outputs of multiple IA-MKNets, which further improves diagnosis accuracy and stability. The experimental results, verified by two bearing datasets with noise interference, confirm that the proposed method improves the fault diagnosis accuracy of rotating machinery under noisy environment, which performance is superior to the other five benchmark methods.

Suppression Method of Partial Discharge Interferences Based on Singular Value Decomposition and Improved Empirical Mode Decomposition

Partial discharge detection is an important means of insulation diagnosis of electrical equipment. To effectively suppress the periodic narrowband and white noise interferences in the process of partial discharge detection, a partial discharge interference suppression method based on singular value decomposition (SVD) and improved empirical mode decomposition (IEMD) is proposed in this paper. First, the partial discharge signal with periodic narrowband interference and white noise interference x(t) is decomposed by SVD. According to the distribution characteristics of single values of periodic narrowband interference signals, the singular value corresponding to periodic narrowband interference is set to zero, and the signal is reconstructed to eliminate the periodic narrowband interference in x(t). IEMD is then performed on x(t). Intrinsic mode function (IMF) is obtained by EMD, and based on the improved 3σ criterion, the obtained IMF components are statistically processed and reconstructed to suppress the influence of white noise interference. The methods proposed in this paper, SVD and SVD + EMD, are applied to process the partial discharge simulation signal and partial discharge measurement signal, respectively. We calculated the signal-to-noise ratio, normalized correlation coefficient, and mean square error of the three methods, respectively, and the results show that the proposed method suppresses the periodic narrowband and white noise interference signals in partial discharge more effectively than the other two methods.

Intelligent Fault Diagnosis Method for Blade Damage of Quad-Rotor UAV Based on Stacked Pruning Sparse Denoising Autoencoder and Convolutional Neural Network

This paper introduces a new intelligent fault diagnosis method based on stack pruning sparse denoising autoencoder and convolutional neural network (sPSDAE-CNN). This method processes the original input data by using a stack denoising autoencoder. Different from the traditional autoencoder, stack pruning sparse denoising autoencoder includes a fully connected autoencoding network, the features extracted from the front layer of the network are used for the operation of the subsequent layer, which means that some new connections will appear between the front and rear layers of the network, reduce the loss of information, and obtain more effective features. Firstly, a one-dimensional sliding window is introduced for data enhancement. In addition, transforming one-dimensional time-domain data into the two-dimensional gray image can further improve the deep learning (DL) ability of models. At the same time, pruning operation is introduced to improve the training efficiency and accuracy of the network. The convolutional neural network model with sPSDAE has a faster training speed, strong adaptability to noise interference signals, and can also suppress the over-fitting problem of the convolutional neural network to a certain extent. Actual experiments show that for the fault of unmanned aerial vehicle (UAV) blade damage, the sPSDAE-CNN model we use has better stability and reliable prediction accuracy than traditional convolutional neural networks. At the same time, For noise signals, better results can be obtained. The experimental results show that the sPSDAE-CNN model still has a good diagnostic accuracy rate in a high-noise environment. In the case of a signal-to-noise ratio of −4, it still has an accuracy rate of 90%.

The Application of Machine Learning ICA-VMD in an Intelligent Diagnosis System in a Low SNR Environment

This paper proposes a new method called independent component analysis–variational mode decomposition (ICA-VMD), which combines ICA and VMD. The purpose is to study the application of ICA-VMD in low signal-to-noise ratio (SNR) signal processing and data analysis. ICA is a very important method in the field of machine learning. It is an unsupervised learning algorithm that can dig out the independent factors hidden in the observation signal. The VMD method estimates each signal component by solving the frequency domain variational optimization problem, and it is very suitable for mechanical fault diagnosis. The advantage of ICA-VMD is that it requires two sensory cues to distinguish the original source from the unwanted noise. In the three cases studied here, the original source was first contaminated by white Gaussian noise. The three cases in this study are under different SNR conditions. The SNR in the first case is –6.46 dB, the SNR in the second case is –21.3728, and the SNR in the third case is –46.8177. The simulation results show that the ICA-VMD method can effectively recover the original source from the contaminated data. It is hoped that, in the future, there will be new discoveries and advances in science and technology to solve the noise interference problem through this method.

Multi-Threshold Image Segmentation of Maize Diseases Based on Elite Comprehensive Particle Swarm Optimization and Otsu

Maize is a major global food crop and as one of the most productive grain crops, it can be eaten; it is also a good feed for the development of animal husbandry and essential raw material for light industry, chemical industry, medicine, and health. Diseases are the main factor limiting the high and stable yield of maize. Scientific and practical identification is a vital link to reduce the damage of diseases and accurate segmentation of disease spots is one of the fundamental techniques for disease identification. However, one single method cannot achieve a good segmentation effect to meet the diversity and complexity of disease spots. In order to solve the shortcomings of noise interference and oversegmentation in the Otsu segmentation method, a non-local mean filtered two-dimensional histogram was used to remove the noise in disease images and a new elite strategy improved comprehensive particle swarm optimization (PSO) method was used to find the optimal segmentation threshold of the objective function in this study. The experimental results of segmenting three kinds of maize foliar disease images show that the segmentation effect of this method is better than other similar algorithms and it has better convergence and stability.

Research on High Robust Multimedia Image Encryption Based on Gyrator Transform Domain Model

The encryption and privacy protection of multimedia image resources are of great value in the information age. The utilization of the gyrator transform domain model in multimedia image encryption can select parameters more accurately, so it has a wider scope of utilization and further ameliorates the stability of the whole system. On account of this, this paper first analyzes the concept and connotation of gyrator transform, then studies the image encryption algorithm on account of gyrator transform, and verifies the robustness of the gyrator transform algorithm under the influence of noise interference, shear attack, and other factors through the high robust multimedia image encryption and result analysis of gyrator transform.