scholarly journals Performance Analysis of Three-Phase Solar PV Integrated UPQC Using Space Vector Technique

2020 ◽  
pp. 140-148
Keyword(s):  
Renewable Energy ◽  
Reactive Power ◽  
Renewable Energy Sources ◽  
Energy Resources ◽  
Power Electronic ◽  
Grid System ◽  
Solar Pv ◽  
Renewable Energy Resources ◽  
Micro Grid ◽  
Micro Grids

: Due to the increase of load demand in future, the generation must also increase. The use of traditional resources such as coal, diesel fuels etc., causes global warming which is leading us to shift to renewable energy resources. Renewable energy resources may in include solar, wind, tidal as the source for production. These are used in small quantities as Distribution Generators (DG) at different locations in a bus system. As the generation of these sources is less when connected to grid, we call them as micro-grids. These micro grids generally use these DGs to distribute power to loads, and involve power electronic elements to control the generation. It induces energy into the system but also create a problem of harmonic distortions and voltage sags. To eliminate these sags and harmonics in the micro grid system caused by the power electronic devices employed by the renewable sources, we induce a UPQC (Unified Power Quality Conditioner) system. The UPQC system eliminates the harmonics in the systems and restores the voltage of the micro-grid system. We introduce a new topology called instantaneous reactive power (IRP) theory in the UPQC control to operate in a more efficient way, by utilizing RES (Renewable Energy Sources) at the DC-link. The RES support the UPQC system by injecting the active power generated by the resources through DC-link.

scholarly journals Optimal Operation of Micro-grids Considering the Uncertainties of Demand and Renewable Energy Resources Generation

2016 ◽  
Vol 5 (3) ◽  
pp. 233-248 ◽  
Author(s):  
Malek Jasemi ◽  
Farid Adabi ◽  
Babak Mozafari ◽  
Samira Salahi
Keyword(s):  
Renewable Energy ◽  
Distributed Generation ◽  
Renewable Energy Sources ◽  
Optimal Operation ◽  
Energy Resources ◽  
Mixed Integer ◽  
Renewable Energy Resources ◽  
Spinning Reserve ◽  
Micro Grid ◽  
Micro Grids

Nowadays, due to technical and economic reasons, the distributed generation (DG) units are widely connected to the low and medium voltage network and created a new structure called micro-grid. Renewable energies (especially wind and solar) based DGs are one of the most important generations units among DG units. Because of stochastic behavior of these resources, the optimum and safe management and operation of micro-grids has become one of the research priorities for researchers. So, in this study, the optimal operation of a typical micro-grid is investigated in order to maximize the penetration of renewable energy sources with the lowest operation cost with respect to the limitations for the load supply and the distributed generation resources. The understudy micro-grid consists of diesel generator, battery, wind turbines and photovoltaic panels. The objective function comprises of fuel cost, start-up cost, spinning reserve cost, power purchasing cost from the upstream grid and the sales revenue of the power to the upstream grid. In this paper, the uncertainties of demand, wind speed and solar radiation are considered and the optimization will be made by using the GAMS software and mixed integer planning method (MIP).Article History: Received May 21, 2016; Received in revised form July 11, 2016; Accepted October 15, 2016; Available onlineHow to Cite This Article: Jasemi, M.,  Adabi, F., Mozafari, B., and Salahi, S. (2016) Optimal Operation of Micro-grids Considering the Uncertainties of Demand and Renewable Energy Resources Generation, Int. Journal of Renewable Energy Development, 5(3),233-248.http://dx.doi.org/10.14710/ijred.5.3.233-248

scholarly journals A Probe into Reactive Power Management in Renewable Energy System using Facts Devices

2019 ◽  
Vol 8 (12) ◽  
pp. 619-626 ◽  
Keyword(s):  
Renewable Energy ◽  
Power Management ◽  
Power Quality ◽  
Reactive Power ◽  
Energy Resources ◽  
Energy Utilization ◽  
Generation Model ◽  
Power Electronic ◽  
Renewable Energy Resources ◽  
Compensating Devices

In the modern era, most of the utility grid is connected with Renewable Energy resources (RERs). In addition to this, many power electronic converters and reactive power compensating devices are also incorporated into the existing grid. This makes the system complicated. Penetration of renewable energy resources affect many power system parameters like grid stability, quality of power, reactive power balance and Sufficient energy utilization. However, the Distributed Generation (DG) towards the power electronic interface creates some critical power quality events such as reactive power management, harmonics and voltage profile which makes the distributed system become a polluted one. This paper depicts the review of modelling and incorporation of various reactive power compensating devices like TCSC, SVC and STATCOM into RES. Power generation model of solar, wind and fuel farm is discussed in this paper. Reactive power compensating devices and its location and sizing are important for the stable and secure operation of the electric grid. Consequently, power quality issues, real-time interconnection issues and policies related to reactive power management are in this paper.

An Optimal Solution for Eco-reliability Stochastic Modeling of Simultaneous Reconfiguration of Distribution Networks and Allocation of Renewable Energy Resources, Capacitors and D-facts

2020 ◽  
Vol 13 (4) ◽  
pp. 486-495
Author(s):  
Masoumeh Karimi ◽  
Mohammad R.J. Oskuee ◽  
Sajad N. Ravdanegh
Keyword(s):  
Renewable Energy ◽  
Stochastic Modeling ◽  
Distribution System ◽  
Reactive Power ◽  
Renewable Energy Sources ◽  
Market Price ◽  
Distribution Networks ◽  
Energy Resources ◽  
Renewable Energy Resources ◽  
Krill Herd

Objective: A new method based on stochastic modeling of simultaneous optimal reconfiguration of distribution networks and allocation of multiple Distribution STATic COMpensator and renewable energy resources as new developed technologies is suggested in this paper. Background: This problem involves vital uncertain parameters such as: intermittent nature of renewable energy sources, load forecasting and market price errors. Krill Herd Algorithm as a powerful optimization solution is applied to solve suggested problem. Methods: Several effective cost based consequences can be achieved by proposed technique like: DG units installation and operation costs, D-Statcom installation cost, capacitor costs, cost of purchased energy from the transmission network, active and reactive power losses cost, line upgrade cost and distribution system reconfiguration cost. Results: In addition, energy not supplied as a vital reliability index incorporated in the cost function aims to improve network’s reliability efficiently. Conclusion: IEEE 33 bus radial distribution system is used here to check the practicability of the proposed scheme.

Operation and control of a stand-alone power system with integrated multiple renewable energy sources

2021 ◽  
pp. 0309524X2110241
Author(s):  
Nindra Sekhar ◽  
Natarajan Kumaresan
Keyword(s):  
Renewable Energy ◽  
Reactive Power ◽  
Renewable Energy Sources ◽  
Energy Sources ◽  
Solar Pv ◽  
Power Requirement ◽  
Squirrel Cage ◽  
Hysteresis Controller ◽  
Squirrel Cage Induction Generator ◽  
And Control

To overcome the difficulties of extending the main power grid to isolated locations, this paper proposes the local installation of a combination of three renewable energy sources, namely, a wind driven DFIG, a solar PV unit, a biogas driven squirrel-cage induction generator (SCIG), and an energy storage battery system. In this configuration one bi-directional SPWM inverter at the rotor side of the DFIG controls the voltage and frequency, to maintain them constant on its stator side, which feeds the load. The PV-battery also supplies the load, through another inverter and a hysteresis controller. Appropriately adding a capacitor bank and a DSTATCOM has also been considered, to share the reactive power requirement of the system. Performance of various modes of operation of this coordinated scheme has been studied through simulation. All the results and relevant waveforms are presented and discussed to validate the successful working of the proposed system.

scholarly journals Multi-Objective Energy Management of a Micro-Grid Considering Stochastic Nature of Load and Renewable Energy Resources

Electronics ◽  
2021 ◽  
Vol 10 (4) ◽  
pp. 403
Author(s):  
Deyaa Ahmed ◽  
Mohamed Ebeed ◽  
Abdelfatah Ali ◽  
Ali S. Alghamdi ◽  
Salah Kamel
Keyword(s):  
Renewable Energy ◽  
Objective Function ◽  
Energy Management ◽  
Energy Resources ◽  
Management Problem ◽  
Renewable Energy Resources ◽  
Multi Objective ◽  
Stochastic Nature ◽  
Whale Optimization ◽  
Micro Grid

Optimal inclusion of a photovoltaic system and wind energy resources in electrical grids is a strenuous task due to the continuous variation of their output powers and stochastic nature. Thus, it is mandatory to consider the variations of the Renewable energy resources (RERs) for efficient energy management in the electric system. The aim of the paper is to solve the energy management of a micro-grid (MG) connected to the main power system considering the variations of load demand, photovoltaic (PV), and wind turbine (WT) under deterministic and probabilistic conditions. The energy management problem is solved using an efficient algorithm, namely equilibrium optimizer (EO), for a multi-objective function which includes cost minimization, voltage profile improvement, and voltage stability improvement. The simulation results reveal that the optimal installation of a grid-connected PV unit and WT can considerably reduce the total cost and enhance system performance. In addition to that, EO is superior to both whale optimization algorithm (WOA) and sine cosine algorithm (SCA) in terms of the reported objective function.

scholarly journals Scalable Multiport Converter Structure for Easy Grid Integration of Alternate Energy Sources for Generation of Isolated Voltage Sources for MMC

Electronics ◽  
2021 ◽  
Vol 10 (15) ◽  
pp. 1779
Author(s):  
Syed Rahman ◽  
Irfan Khan ◽  
Khaliqur Rahman ◽  
Sattam Al Otaibi ◽  
Hend I. Alkhammash ◽  
...  
Keyword(s):  
Renewable Energy ◽  
Renewable Energy Sources ◽  
Energy Resources ◽  
Energy Sources ◽  
Renewable Energy Resources ◽  
Component Level ◽  
Storage Devices ◽  
Multiport Converter ◽  
Detailed Simulation ◽  
The Individual

This paper presents a novel, scalable, and modular multiport power electronic topology for the integration of multiple resources. This converter is not only scalable in terms of the integration of multiple renewable energy resources (RES) and storage devices (SDs) but is also scalable in terms of output ports. Multiple dc outputs of a converter are designed to serve as input to the stacking modules (SMs) of the modular multilevel converter (MMC). The proposed multiport converter is bidirectional in nature and superior in terms of functionality in a way that a modular universal converter is responsible for the integration of multiple RES/SDs and regulates multiple dc output ports for SMs of MMC. All input ports can be easily integrated (and controlled), and output ports also can be controlled independently in response to any load variations. An isolated active half-bridge converter with multiple secondaries acts as a central hub for power processing with multiple renewable energy resources that are integrated at the primary side. To verify the proposed converter, a detailed design of the converter-based system is presented along with the proposed control algorithm for managing power on the individual component level. Additionally, different modes of power management (emulating the availability/variability of renewable energy sources (RES)) are exhibited and analyzed here. Finally, detailed simulation results are presented in detail for the validation of the proposed concepts and design process.

Calculation of Receipt of Renewable Energy Resources and Operation Modes of Power Plants

2021 ◽  
pp. 1777-1795
Author(s):  
Baba Dzhabrailovich Babaev ◽  
Vladimir Panchenko ◽  
Valeriy Vladimirovich Kharchenko
Keyword(s):  
Renewable Energy ◽  
Power Plants ◽  
Optimization Problem ◽  
Renewable Energy Sources ◽  
Operating Mode ◽  
Climatic Conditions ◽  
Energy Resources ◽  
Optimal Configuration ◽  
Renewable Energy Resources ◽  
Energy Complex

The main objective of the work is to develop principles for the formation of the optimal composition of the energy complex from all the given power plants based on renewable energy sources for an autonomous consumer, taking into account the variable energy loads of the consumer, changing climatic conditions and the possibility of using local fuel and energy resources. As a result of solving this optimization problem, in addition to the optimal configuration of the power complex, it is also necessary to solve the problem of optimizing the joint operation of different types of power plants from the selected optimal configuration, that is, it is necessary to determine the optimal modes of operation of power plants and the optimal share of their participation in providing consumers at every moment in time. A numerical method for analyzing and optimizing the parameters and operating mode of the energy complex with the most accurate consideration of the schedule of changes in consumer load and software that automates the solution of this optimization problem are also presented.

Sign in / Sign up

Export Citation Format

Share Document