Application of Image-based 3D Reconstruction in Architectural Heritage Surveying and Mapping

2021 ◽  
Keyword(s):  
3D Reconstruction ◽  
Architectural Heritage ◽  
Surveying And Mapping

3D Reconstruction of Mining Area Based on Terrestrial Laser Scanner and Calculation of Extraction

2013 ◽  
Vol 325-326 ◽  
pp. 1787-1791 ◽  
Author(s):  
Hang Chen ◽  
Zhang Ying ◽  
Zhen Feng Shao ◽  
Zhi Qiang Du
Keyword(s):  
3D Reconstruction ◽  
Laser Scanning ◽  
3D Model ◽  
Laser Scanner ◽  
Terrestrial Laser Scanning ◽  
Mining Area ◽  
New Method ◽  
Terrestrial Laser Scanner ◽  
Surveying And Mapping

This paper analyzes the characteristics of terrestrial laser scanning technology and it's advantages of surveying and mapping application in mining area. Through the analysis of the specific topographical features of mining area, we design a new method in measurement based on the terrestrial laser scanning technology, and probe into the methods of 3D reconstruction and calculation of extraction. Experiments show that the proposed method can improve the efficiency of surveying and mapping in mining area , the 3D model can be used to monitor the extraction of mining area.

Detection, Averaging, and 3D Reconstruction of Biological Specimens on Hypercubes (Transputer-based) Computers

1990 ◽  
Vol 48 (1) ◽  
pp. 454-455
Author(s):  
Jose-Maria Carazo ◽  
I. Benavides ◽  
S. Marco ◽  
J.L. Carrascosa ◽  
E.L. Zapata
Keyword(s):  
3D Reconstruction ◽  
3D Structure ◽  
Three Dimensional ◽  
Software Tools ◽  
Mapping Method ◽  
Computer Architectures ◽  
Parallel Computer ◽  
Reconstruction Process ◽  
Computing Power ◽  
Order Of Magnitude

Obtaining the three-dimensional (3D) structure of negatively stained biological specimens at a resolution of, typically, 2 - 4 nm is becoming a relatively common practice in an increasing number of laboratories. A combination of new conceptual approaches, new software tools, and faster computers have made this situation possible. However, all these 3D reconstruction processes are quite computer intensive, and the middle term future is full of suggestions entailing an even greater need of computing power. Up to now all published 3D reconstructions in this field have been performed on conventional (sequential) computers, but it is a fact that new parallel computer architectures represent the potential of order-of-magnitude increases in computing power and should, therefore, be considered for their possible application in the most computing intensive tasks.We have studied both shared-memory-based computer architectures, like the BBN Butterfly, and local-memory-based architectures, mainly hypercubes implemented on transputers, where we have used the algorithmic mapping method proposed by Zapata el at. In this work we have developed the basic software tools needed to obtain a 3D reconstruction from non-crystalline specimens (“single particles”) using the so-called Random Conical Tilt Series Method. We start from a pair of images presenting the same field, first tilted (by ≃55°) and then untilted. It is then assumed that we can supply the system with the image of the particle we are looking for (ideally, a 2D average from a previous study) and with a matrix describing the geometrical relationships between the tilted and untilted fields (this step is now accomplished by interactively marking a few pairs of corresponding features in the two fields). From here on the 3D reconstruction process may be run automatically.

Structural Studies on the Eukaryotic Ribosome

1990 ◽  
Vol 48 (1) ◽  
pp. 256-257
Author(s):  
Adriana Verschoor ◽  
Ronald Milligan ◽  
Suman Srivastava ◽  
Joachim Frank
Keyword(s):  
Chick Embryo ◽  
3D Reconstruction ◽  
Single Particle ◽  
Mass Density ◽  
Particle Surface ◽  
Uranyl Acetate ◽  
Electron Microscopic ◽  
Eukaryotic Ribosome ◽  
Negative Stain ◽  
Reconstruction Methods

We have studied the eukaryotic ribosome from two vertebrate species (rabbit reticulocyte and chick embryo ribosomes) in several different electron microscopic preparations (Fig. 1a-d), and we have applied image processing methods to two of the types of images. Reticulocyte ribosomes were examined in both negative stain (0.5% uranyl acetate, in a double-carbon preparation) and frozen hydrated preparation as single-particle specimens. In addition, chick embryo ribosomes in tetrameric and crystalline assemblies in frozen hydrated preparation have been examined. 2D averaging, multivariate statistical analysis, and classification methods have been applied to the negatively stained single-particle micrographs and the frozen hydrated tetramer micrographs to obtain statistically well defined projection images of the ribosome (Fig. 2a,c). 3D reconstruction methods, the random conical reconstruction scheme and weighted back projection, were applied to the negative-stain data, and several closely related reconstructions were obtained. The principal 3D reconstruction (Fig. 2b), which has a resolution of 3.7 nm according to the differential phase residual criterion, can be compared to the images of individual ribosomes in a 2D tetramer average (Fig. 2c) at a similar resolution, and a good agreement of the general morphology and of many of the characteristic features is seen.Both data sets show the ribosome in roughly the same ’view’ or orientation, with respect to the adsorptive surface in the electron microscopic preparation, as judged by the agreement in both the projected form and the distribution of characteristic density features. The negative-stain reconstruction reveals details of the ribosome morphology; the 2D frozen-hydrated average provides projection information on the native mass-density distribution within the structure. The 40S subunit appears to have an elongate core of higher density, while the 60S subunit shows a more complex pattern of dense features, comprising a rather globular core, locally extending close to the particle surface.

UNESCO World Heritage and Kosovo Towards a Tentative List for Kosovo

2016 ◽  
Vol 5 (1) ◽  
pp. 1-10
Author(s):  
Caroline Jaeger Klein
Keyword(s):  
World Heritage ◽  
Architectural Heritage ◽  
Unesco World Heritage ◽  
Serbia And Montenegro

In 2015, Kosovo tried to join UNESCO and failed by three quotes. Is Kosovo ready for its UNESCO membership? At least for its national architectural heritage, this question is to answer with no. The intensively discussed issue of the medieval monuments of Kosovo inscribed as UNESCO World Heritage by Serbia and Montenegro before the declaration of independency in 2008 and their further management through Kosovo is just one aspect. More troubling is that the rather young state not yet could establish sufficient structures to gain a systematic inventory of its monuments, sites and historic ensembles, nor to extract a tentative list for UNESCO out of such an encompassing inventory. This article intends to clarify the definitions of World Heritage, the institutions and NGO’s involved, the mechanisms and philosophies behind. What is the urgent homework for Kosovo? Which national and international groups of experts Kosovo has to name and make responsible for the systemic inventory of its architectural heritage and for creating a tentative list? What is the role and importance of ICOMOS in that process? Which other stakeholders have to be Identified and educated towards that issue?</p><p>Based on such general considerations the author tries to design finally a preliminary tentative list for the architectural heritage of Kosovo. Hence, not the list itself is of importance but the discussion of the pro and contra arguments for single candidates.

3D reconstruction and calculation of surface area and volume of bell pepper

2007 ◽  
Vol 3 (1) ◽  
pp. 89-113
Author(s):  
Zoltán Gillay ◽  
László Fenyvesi
Keyword(s):  
3D Reconstruction ◽  
Surface Area ◽  
Three Dimensional ◽  
Reference Method ◽  
Bell Pepper ◽  
Three Dimensional Model ◽  
Acceptable Error ◽  
Volume Calculation ◽  
Bell Peppers ◽  
Area And Volume

There was a method developed that generates the three-dimensional model of not axisymmetric produce, based on an arbitrary number of photos. The model can serve as a basis for calculating the surface area and the volume of produce. The efficiency of the reconstruction was tested on bell peppers and artificial shapes. In case of bell peppers 3-dimensional reconstruction was created from 4 images rotated in 45° angle intervals. The surface area and the volume were estimated on the basis of the reconstructed area. Furthermore, a new and simple reference method was devised to give precise results for the surface area of bell pepper. The results show that this 3D reconstruction-based surface area and volume calculation method is suitable to determine the surface area and volume of definite bell peppers with an acceptable error.

Three-dimensional Reconstruction of Microscopic Image Based on Multi-ST Algorithm

2020 ◽  
Vol 64 (2) ◽  
pp. 20506-1-20506-7
Author(s):  
Min Zhu ◽  
Rongfu Zhang ◽  
Pei Ma ◽  
Xuedian Zhang ◽  
Qi Guo
Keyword(s):  
3D Reconstruction ◽  
Three Dimensional ◽  
Scale Model ◽  
Microscopic Image ◽  
Multi Scale ◽  
Gaussian Pyramid ◽  
Cost Aggregation ◽  
Dimensional Reconstruction ◽  
Image Pairs ◽  
Accurate Matching

Abstract Three-dimensional (3D) reconstruction is extensively used in microscopic applications. Reducing excessive error points and achieving accurate matching of weak texture regions have been the classical challenges for 3D microscopic vision. A Multi-ST algorithm was proposed to improve matching accuracy. The process is performed in two main stages: scaled microscopic images and regularized cost aggregation. First, microscopic image pairs with different scales were extracted according to the Gaussian pyramid criterion. Second, a novel cost aggregation approach based on the regularized multi-scale model was implemented into all scales to obtain the final cost. To evaluate the performances of the proposed Multi-ST algorithm and compare different algorithms, seven groups of images from the Middlebury dataset and four groups of experimental images obtained by a binocular microscopic system were analyzed. Disparity maps and reconstruction maps generated by the proposed approach contained more information and fewer outliers or artifacts. Furthermore, 3D reconstruction of the plug gauges using the Multi-ST algorithm showed that the error was less than 0.025 mm.

Sign in / Sign up

Export Citation Format

Share Document