scholarly journals Network Architecture for Ultra Low Latency Applications

2021 ◽  
Vol 7 (37) ◽  
pp. 1-4
Author(s):  
Patrick Fiati ◽  
K. Adu Boahen Opare
2018 ◽  
Author(s):  
Phanidra Palagummi ◽  
Vedant Somani ◽  
Krishna M. Sivalingam ◽  
Balaji Venkat

Networking connectivity is increasingly based on wireless network technologies, especially in developing nations where the wired network infrastructure is not accessible to a large segment of the population. Wireless data network technologies based on 2G and 3G are quite common globally; 4G-based deployments are on the rise during the past few years. At the same time, the increasing high-bandwidth and low-latency requirements of mobile applications has propelled the Third Generation Partnership Project (3GPP) standards organization to develop standards for the next generation of mobile networks, based on recent advances in wireless communication technologies. This standard is called the Fifth Generation (5G) wireless network standard. This paper presents a high-level overview of the important architectural components, of the advanced communication technologies, of the advanced networking technologies such as Network Function Virtualization and other important aspects that are part of the 5G network standards. The paper also describes some of the common future generation applications that require low-latency and high-bandwidth communications.


Photonics ◽  
2021 ◽  
Vol 8 (1) ◽  
pp. 11
Author(s):  
Fulong Yan ◽  
Changshun Yuan ◽  
Chao Li ◽  
Xiong Deng

Interconnecting networks adopting Fast Optical Switches (FOS) can achieve high bandwidth, low latency, and low power consumption. We propose and demonstrate a novel interconnecting topology based on FOS (FOSquare) with distributed fast flow control which is suitable for HPC infrastructures. We also present an Optimized Mapping (OPM) algorithm that maps the most communication-related processes inside a rack. We numerically investigate and compare the network performance of FOSquare with Leaf-Spine under real traffic traces collected by running multiple applications (CG, MG, MILC, and MINI_MD) in an HPC infrastructure. The numerical results show that the FOSquare can reduce >10% latency with respect to Leaf-Spine under the scenario of 16 available cores.


2016 ◽  
Vol 82 ◽  
pp. 1-12 ◽  
Author(s):  
Ting Wang ◽  
Zhiyang Su ◽  
Yu Xia ◽  
Bo Qin ◽  
Mounir Hamdi

2013 ◽  
Vol 22 (06) ◽  
pp. 1350045 ◽  
Author(s):  
MACIEJ WIELGOSZ ◽  
MAURITZ PANGGABEAN ◽  
JIANG WANG ◽  
LEIF ARNE RØNNINGEN

The background that underlies this work is the envisioned real-time tele-immersive collaboration system for the future that supports delay-sensitive applications involving participants from remote places via their collaboration spaces (CSs). The end-to-end delay as high as 20 ms is required for good synchronization of such applications, for example collaborative dancing and remote conducting of choir. It is much lower than that facilitated by existing teleconference systems. A novel network architecture with delay guarantee, namely Distributed Multimedia Plays (DMP), has been proposed and designed to realize the vision. The maximum low latency is guaranteed because DMP network nodes can drop DMP packets of multimedia data from the CSs due to instantaneous traffic condition. Besides ultrafast processing time, modularity, and scalability must be taken into account in hardware design and implementation of the nodes for seamless incorporation of the modules. These lead us to employing field-programmable gate array (FPGA) due to its substantial computational power and flexibility. This paper presents an FPGA-based platform for the design and implementation of DMP network nodes. It provides a detailed introduction to the platform architecture and the simulation-implementation environment for the design. The modularity of the implemented node is shown by addressing three important modules for packet dropping, 3D warping, and image transform. Our compact implementation of the network node on Xilinx Virtex-6 ML605 mostly consumes very small amount of available resources. Moreover the elementary operations on our implementation takes (much) less than 5 μs as desired to meet the low-latency requirement.


2016 ◽  
Vol 8 (10) ◽  
pp. 757 ◽  
Author(s):  
Yue Wang ◽  
Huaxi Gu ◽  
Kang Wang ◽  
Yintang Yang ◽  
Kun Wang

2018 ◽  
Vol 16 ◽  
pp. 59-66
Author(s):  
Paul Arnold ◽  
Dirk von Hugo

Abstract. This paper summarizes expectations and requirements towards future converged communication systems denoted by 5th Generation (5G). Multiple research and standardization activities globally contribute to the definition and specification of an Information and Communication Technology (ICT) to provide business customers and residential users with both, existing and future upcoming services which demand for higher data rates and granted performance figures in terms of QoS parameters, such as low latency and high reliability. Representative use case families are threefold and represented as enhanced Mobile Broadband (eMBB), massive Internet of Things (mIoT), and Critical Communication, i.e. Ultra-Low Latency (ULL)/Ultra-High Reliability (UHR). To deploy and operate a dedicated network for each service or use case separately would raise the expenses and service costs to an unduly high amount. Instead provision of a commonly shared physical infrastructure offering resources for transport, processing, and storage of data to several separated logical networks (slices) individually managed and configured by potentially multiple service providers is the main concept of this new approach. Beside a multitude of other initiatives the EU-funded 5G NORMA project (5G Novel Radio Multiservice adaptive network Architecture) has developed an architecture which enables not only network programmability (configurability in software), but also network slicing and Multi Tenancy (allowing independent 3rd parties to offer an end-to-end service tailored according to their needs) in a mobile network. Major aspects dealt with here are the selectable support of mobility (on-demand) and service-aware QoE/QoS (Quality of Experience/Service) control. Specifically we will report on the outcome of the analysis of design criteria for Mobility Management schemes and the result of an exemplary application of the modular mobility function to scenarios with variable service requirements (e.g. high-terminal speed vs. on-demand mobility or portability of devices). An efficient sharing of scarce frequency resources in new radio systems demands for tight coordination of orchestration and assignment (scheduling) of resources for the different network slices as per capacity and priority (QoS) demand. Dynamicity aspects in changing algorithms and schemes to manage, configure, and optimize the resources at the radio base stations according to slice specific Service Level Agreements (SLAs) are investigated. It has been shown that architectural issues in terms of hierarchy (centralized vs. distributed) and layering, i.e. separation of control (signaling) and (user) data plane will play an essential role to increase the elasticity of network infrastructures which is in focus of applying SDN (Software Defined Networking) and NFV (Network Function Virtualization) to next generation communication systems. An outlook towards follow-on standardization and open research questions within different SDOs (Standards Defining Organizations) and recently started cooperative projects concludes the contribution.


Sign in / Sign up

Export Citation Format

Share Document