scholarly journals Attribution of aerosol light absorption to black carbon, brown carbon, and dust in China – interpretations of atmospheric measurements during EAST-AIRE

2009 ◽  
Vol 9 (6) ◽  
pp. 2035-2050 ◽  
Author(s):  
M. Yang ◽  
S. G. Howell ◽  
J. Zhuang ◽  
B. J. Huebert
Keyword(s):  
Optical Properties ◽  
Black Carbon ◽  
Light Absorption ◽  
Northern China ◽  
Wavelength Dependence ◽  
Atmospheric Measurements ◽  
Brown Carbon ◽  
Mass Distributions ◽  
Limit Value ◽  
Light Absorbers

Abstract. Black carbon, brown carbon, and mineral dust are three of the most important light absorbing aerosols. Their optical properties differ greatly and are distinctive functions of the wavelength of light. Most optical instruments that quantify light absorption, however, are unable to distinguish one type of absorbing aerosol from another. It is thus instructive to separate total absorption from these different light absorbers to gain a better understanding of the optical characteristics of each aerosol type. During the EAST-AIRE (East Asian Study of Tropospheric Aerosols: an International Regional Experiment) campaign near Beijing, we measured light scattering using a nephelometer, and light absorption using an aethalometer and a particulate soot absorption photometer. We also measured the total mass concentrations of carbonaceous (elemental and organic carbon) and inorganic particulates, as well as aerosol number and mass distributions. We were able to identify periods during the campaign that were dominated by dust, biomass burning, fresh (industrial) chimney plumes, other coal burning pollution, and relatively clean (background) air for Northern China. Each of these air masses possessed distinct intensive optical properties, including the single scatter albedo and Ångstrom exponents. Based on the wavelength-dependence and particle size distribution, we apportioned total light absorption to black carbon, brown carbon, and dust; their mass absorption efficiencies at 550 nm were estimated to be 9.5, 0.5 (a lower limit value), and 0.03 m2/g, respectively. While agreeing with the common consensus that black carbon is the most important light absorber in the mid-visible, we demonstrated that brown carbon and dust could also cause significant absorption, especially at shorter wavelengths.

scholarly journals Attribution of aerosol light absorption to black carbon, brown carbon, and dust in China – interpretations of atmospheric measurements during EAST-AIRE

2008 ◽  
Vol 8 (3) ◽  
pp. 10913-10954 ◽  
Author(s):  
M. Yang ◽  
S. G. Howell ◽  
J. Zhuang ◽  
B. J. Huebert
Keyword(s):  
Optical Properties ◽  
Black Carbon ◽  
Light Absorption ◽  
Northern China ◽  
Wavelength Dependence ◽  
Atmospheric Measurements ◽  
Brown Carbon ◽  
Mass Distributions ◽  
Absorbing Aerosols ◽  
Light Absorbers

Abstract. Black carbon, brown carbon, and mineral dust are three of the most important light absorbing aerosols. Their optical properties differ greatly and are distinctive functions of the wavelength of light. Most optical instruments that quantify light absorption, however, are unable to distinguish one type of absorbing aerosol from another. It is thus instructive to separate total absorption from these different light absorbers to gain a better understanding of the optical characteristics of each aerosol type. During the EAST-AIRE (East Asian Study of Tropospheric Aerosols: an International Regional Experiment) campaign near Beijing, we measured light scattering using a nephelometer, and light absorption using an aethalometer and a particulate soot absorption photometer. We also measured the total mass concentrations of carbonaceous (elemental and organic carbon) and inorganic particulates, as well as aerosol number and mass distributions. We were able to identify periods during the campaign that were dominated by dust, biomass burning, fresh (industrial) chimney plumes, other coal burning pollution, and relatively clean (background) air for Northern China. Each of these air masses possessed distinct intensive optical properties, including the single scatter albedo and Ångstrom exponents. Based on the wavelength-dependence and particle size distribution, we apportioned total light absorption to black carbon, brown carbon, and dust; their mass absorption efficiencies at 550 nm were estimated to be 9.5, 0.5, and 0.03 m2/g, respectively. While agreeing with the common consensus that BC is the most important light absorber in the mid-visible, we demonstrated that brown carbon and dust could also cause significant absorption, especially at shorter wavelengths.

scholarly journals Production of particulate brown carbon during atmospheric aging of residential wood-burning emissions

2018 ◽  
Vol 18 (24) ◽  
pp. 17843-17861 ◽  
Author(s):  
Nivedita K. Kumar ◽  
Joel C. Corbin ◽  
Emily A. Bruns ◽  
Dario Massabó ◽  
Jay G. Slowik ◽  
...  
Keyword(s):  
Black Carbon ◽  
Light Absorption ◽  
Wavelength Dependence ◽  
Organic Aerosol ◽  
Geometric Standard Deviation ◽  
Wood Combustion ◽  
Brown Carbon ◽  
Atmospheric Aging ◽  
Aerosol Absorption ◽  
Uv Visible

Abstract. We investigate the optical properties of light-absorbing organic carbon (brown carbon) from domestic wood combustion as a function of simulated atmospheric aging. At shorter wavelengths (370–470 nm), light absorption by brown carbon from primary organic aerosol (POA) and secondary organic aerosol (SOA) formed during aging was around 10 % and 20 %, respectively, of the total aerosol absorption (brown carbon plus black carbon). The mass absorption cross section (MAC) determined for black carbon (BC, 13.7 m2 g−1 at 370 nm, with geometric standard deviation GSD =1.1) was consistent with that recommended by Bond et al. (2006). The corresponding MAC of POA (5.5 m2 g−1; GSD =1.2) was higher than that of SOA (2.4 m2 g−1; GSD =1.3) at 370 nm. However, SOA presents a substantial mass fraction, with a measured average SOA ∕ POA mass ratio after aging of ∼5 and therefore contributes significantly to the overall light absorption, highlighting the importance of wood-combustion SOA as a source of atmospheric brown carbon. The wavelength dependence of POA and SOA light absorption between 370 and 660 nm is well described with absorption Ångström exponents of 4.6 and 5.6, respectively. UV-visible absorbance measurements of water and methanol-extracted OA were also performed, showing that the majority of the light-absorbing OA is water insoluble even after aging.

scholarly journals Production of particulate brown carbon during atmospheric aging of wood-burning emissions

2018 ◽  
Author(s):  
Nivedita K. Kumar ◽  
Joel C. Corbin ◽  
Emily A. Bruns ◽  
Dario Massabó ◽  
Jay G. Slowik ◽  
...  
Keyword(s):  
Black Carbon ◽  
Light Absorption ◽  
Wavelength Dependence ◽  
Organic Aerosol ◽  
Geometric Standard Deviation ◽  
Wood Combustion ◽  
Brown Carbon ◽  
Atmospheric Aging ◽  
Aerosol Absorption ◽  
Uv Visible

Abstract. We investigate the optical properties of light-absorbing organic carbon (brown carbon) from domestic wood combustion as a function of simulated atmospheric aging. At shorter wavelengths, light absorption by brown carbon from primary organic aerosol (POA) and secondary organic aerosol (SOA) formed during aging was around 10 % and 20 %, respectively, of the total aerosol absorption (brown carbon plus black carbon). The mass absorption cross-section (MAC) determined for black carbon (BC, 13.7 m2 g−1 (geometric standard deviation GSD = 1.1) at 370 nm) was consistent with that recommended by Bond et al. (2006). The corresponding MAC of POA (5.5 m2 g−1 (GSD = 1.2)) was higher than that of SOA (2.4 m2 g−1 (GSD = 1.3)) at 370 nm. However, SOA presents a substantial mass fraction, with a measured average SOA / POA mass ratio after aging of ~ 5 and therefore contributes significantly to the overall light absorption, highlighting the importance of wood-combustion SOA as a source of atmospheric brown carbon. The wavelength dependence of POA and SOA light absorption between 370 nm and 660 nm is well described with absorption Ångström exponents of 4.6 and 5.6, respectively. UV-visible absorbance measurements of water and methanol-extracted OA were also performed showing that the majority of the light-absorbing OA is water insoluble even after aging.

scholarly journals Development of an improved two-sphere integration technique for quantifying black carbon concentrations in the atmosphere and seasonal snow

2020 ◽  
Vol 13 (1) ◽  
pp. 39-52 ◽  
Author(s):  
Xin Wang ◽  
Xueying Zhang ◽  
Wenjing Di
Keyword(s):  
Black Carbon ◽  
Light Absorption ◽  
Optical Method ◽  
Theoretical Calculations ◽  
Dominant Role ◽  
Northern China ◽  
Least Squares Regression ◽  
Seasonal Snow ◽  
Empirical Procedure ◽  
Total Light

Abstract. An improved two-sphere integration (TSI) technique has been developed to quantify black carbon (BC) concentrations in the atmosphere and seasonal snow. The major advantage of this system is that it combines two distinct integrated spheres to reduce the scattering effect due to light-absorbing particles and thus provides accurate determinations of total light absorption from BC collected on Nuclepore filters. The TSI technique can be calibrated using a series of 15 filter samples of standard fullerene soot. This technique quantifies the mass of BC by separating the spectrally resolved total light absorption into BC and non-BC fractions. To assess the accuracy of the improved system, an empirical procedure for measuring BC concentrations with a two-step thermal–optical method is also applied. Laboratory results indicate that the BC concentrations determined using the TSI technique and theoretical calculations are well correlated (R2=0.99), whereas the thermal–optical method underestimates BC concentrations by 35 %–45 % compared to that measured by the TSI technique. Assessments of the two methods for atmospheric and snow samples revealed excellent agreement, with least-squares regression lines with slopes of 1.72 (r2=0.67) and 0.84 (r2=0.93), respectively. However, the TSI technique is more accurate in quantifications of BC concentrations in both the atmosphere and seasonal snow, with an overall lower uncertainty. Using the improved TSI technique, we find that light absorption at a wavelength of 550 nm due to BC plays a dominant role relative to non-BC light absorption in both the atmosphere (62.76 %–91.84 % of total light absorption) and seasonal snow (43.11 %–88.56 %) over northern China.

scholarly journals Impact of brown and clear carbon on light absorption enhancement, single scatter albedo and absorption wavelength dependence of black carbon

2010 ◽  
Vol 10 (9) ◽  
pp. 4207-4220 ◽  
Author(s):  
D. A. Lack ◽  
C. D. Cappa
Keyword(s):  
Black Carbon ◽  
Light Absorption ◽  
Radiative Forcing ◽  
Large Scale ◽  
Wavelength Dependence ◽  
Absorption Enhancement ◽  
Core Shell ◽  
Enhancement Effect ◽  
Visible Radiation ◽  
Single Scatter

Abstract. The presence of clear coatings on atmospheric black carbon (BC) particles is known to enhance the magnitude of light absorption by the BC cores. Based on calculations using core/shell Mie theory, we demonstrate that the enhancement of light absorption (EAbs) by atmospheric black carbon (BC) when it is coated in mildly absorbing material (CBrown) is reduced relative to the enhancement induced by non-absorbing coatings (CClear). This reduction, sensitive to both the CBrown coating thickness and imaginary refractive index (RI), can be up to 50% for 400 nm radiation and 25% averaged across the visible radiation spectrum for reasonable core/shell diameters. The enhanced direct radiative forcing possible due to the enhancement effect of CClear is therefore reduced if the coating is absorbing. Additionally, the need to explicitly treat BC as an internal, as opposed to external, mixture with CBrown is shown to be important to the calculated single scatter albedo only when models treat BC as large spherical cores (>50 nm). For smaller BC cores (or fractal agglomerates) consideration of the BC and CBrown as an external mixture leads to relatively small errors in the particle single scatter albedo of <0.03. It has often been assumed that observation of an absorption Angström exponent (AAE)>1 indicates absorption by a non-BC aerosol. Here, it is shown that BC cores coated in CClear can reasonably have an AAE of up to 1.6, a result that complicates the attribution of observed light absorption to CBrown within ambient particles. However, an AAE<1.6 does not exclude the possibility of CBrown; rather CBrown cannot be confidently assigned unless AAE>1.6. Comparison of these model results to various ambient AAE measurements demonstrates that large-scale attribution of CBrown is a challenging task using current in-situ measurement methods. We suggest that coincident measurements of particle core and shell sizes along with the AAE may be necessary to distinguish absorbing and non-absorbing OC.

Experimental evidence of the lensing effect suppression for atmospheric black carbon containing brown coatings

2020 ◽  
Author(s):  
Vaios Moschos ◽  
Martin Gysel-Beer ◽  
Robin L. Modini ◽  
Joel C. Corbin ◽  
Dario Massabò ◽  
...  
Keyword(s):  
Black Carbon ◽  
Radiative Forcing ◽  
Wavelength Dependence ◽  
Chem Phys ◽  
Absorption Enhancement ◽  
Visible Spectroscopy ◽  
Scanning Mobility Particle Sizer ◽  
Absorption Data ◽  
Brown Carbon ◽  
Aerosol Radiative Forcing

&lt;p&gt;Accounting for the wavelength- and source-dependent optical absorption properties of the abundant light-absorbing organic (brown) carbon (BrC) and the mixing state of atmospheric black carbon (BC) are essential to reduce the large uncertainty in aerosol radiative forcing.&amp;#160;Estimation of BrC absorption online by subtraction is highly uncertain and may be biased if not decoupled from the potential BC absorption enhancement (lensing) due to non-refractory (organic and inorganic) coating acquisition.&lt;/p&gt;&lt;p&gt;Here, the reported total particulate absorption is based on long-term, filter-based seven-wavelength Aethalometer (AE33 model) data, corrected for multiple scattering effects with Multi-Wavelength Absorbance Analyzer (5&amp;#955; MWAA) measurements. Using ultraviolet-visible spectroscopy absorbance measurements along with particle size distributions obtained by a scanning mobility particle sizer, we have conducted Mie calculations to assess the importance of source-specific extractable particulate BrC (Moschos et al., 2018) versus BC absorption.&lt;/p&gt;&lt;p&gt;For the species-specific optical closure, the wavelength dependence of bare BC absorption is estimated using MWAA measurements upon successive filter extractions to remove the influence of BrC/coatings. The lensing contribution, supported by observations from field-emission scanning electron microscopy coupled with energy-dispersive X-ray spectroscopy, is estimated at longer wavelengths using a refined proxy for the BC coating thickness. The approach is validated independently by applying a novel positive matrix factorization-based approach on the calibrated total AE33 absorption data.&lt;/p&gt;&lt;p&gt;Based on the observational constraints established in this study, we demonstrate for various distinct case studies that the interplay between lensing and BrC absorption results in lower than expected BC absorption at shorter wavelengths. This indicates that the volume additivity assumption is not valid for particulate absorption by internally mixed heterogeneous atmospheric aerosol populations. These comprehensive experimental analyses verify the BC lensing suppression predicted for simplified core-shell structures containing moderately absorbing BrC (Lack &amp; Cappa, 2010). The implications discussed in this work are relevant for co-emitted species from biomass burning or aged plumes with high BrC to BC mass/absorption ratio.&lt;/p&gt;&lt;p&gt;&amp;#160;&lt;/p&gt;&lt;p&gt;&lt;strong&gt;References&lt;/strong&gt;&lt;/p&gt;&lt;p&gt;Moschos, V., Kumar, N. K., Daellenbach, K. R., Baltensperger, U., Pr&amp;#233;v&amp;#244;t, A. S. H., and El Haddad, I.: Source apportionment of brown carbon absorption by coupling ultraviolet-visible spectroscopy with aerosol mass spectrometry, Environ. Sci. Tech. Lett., 5, 302-308, https://doi.org/10.1021/acs.estlett.8b00118, 2018.&lt;/p&gt;&lt;p&gt;Lack, D. A. and Cappa, C. D.: Impact of brown and clear carbon on light absorption enhancement, single scatter albedo and absorption wavelength dependence of black carbon, Atmos. Chem. Phys., 10, 4207&amp;#8211;4220, https://doi.org/10.5194/acp-10-4207-2010, 2010.&lt;/p&gt;

scholarly journals Aerosol scattering and absorption during the EUCAARI-LONGREX flights of the Facility for Airborne Atmospheric Measurements (FAAM) BAe-146: can measurements and models agree?

2012 ◽  
Vol 12 (15) ◽  
pp. 7251-7267 ◽  
Author(s):  
E. J. Highwood ◽  
M. J. Northway ◽  
G. R. McMeeking ◽  
W. T. Morgan ◽  
D. Liu ◽  
...  
Keyword(s):  
Optical Properties ◽  
Organic Carbon ◽  
Black Carbon ◽  
Growth Curves ◽  
Temporal Variations ◽  
Mie Scattering ◽  
Chemical Components ◽  
Refractive Indices ◽  
Hygroscopic Growth ◽  
Atmospheric Measurements

Abstract. Scattering and absorption by aerosol in anthropogenically perturbed air masses over Europe has been measured using instrumentation flown on the UK's BAe-146-301 large Atmospheric Research Aircraft (ARA) operated by the Facility for Airborne Atmospheric Measurements (FAAM) on 14 flights during the EUCAARI-LONGREX campaign in May 2008. The geographical and temporal variations of the derived shortwave optical properties of aerosol are presented. Values of single scattering albedo of dry aerosol at 550 nm varied considerably from 0.86 to near unity, with a campaign average of 0.93 ± 0.03. Dry aerosol optical depths ranged from 0.030 ± 0.009 to 0.24 ± 0.07. An optical properties closure study comparing calculations from composition data and Mie scattering code with the measured properties is presented. Agreement to within measurement uncertainties of 30% can be achieved for both scattering and absorption, but the latter is shown to be sensitive to the refractive indices chosen for organic aerosols, and to a lesser extent black carbon, as well as being highly dependent on the accuracy of the absorption measurements. Agreement with the measured absorption can be achieved either if organic carbon is assumed to be weakly absorbing, or if the organic aerosol is purely scattering and the absorption measurement is an overestimate due to the presence of large amounts of organic carbon. Refractive indices could not be inferred conclusively due to this uncertainty, despite the enhancement in methodology compared to previous studies that derived from the use of the black carbon measurements. Hygroscopic growth curves derived from the wet nephelometer indicate moderate water uptake by the aerosol with a campaign mean f(RH) value (ratio in scattering) of 1.5 (range from 1.23 to 1.63) at 80% relative humidity. This value is qualitatively consistent with the major chemical components of the aerosol measured by the aerosol mass spectrometer, which are primarily mixed organics and nitrate and some sulphate.

Sign in / Sign up

Export Citation Format

Share Document