scholarly journals UV Raman lidar measurements of relative humidity for the characterization of cirrus cloud microphysical properties

2009 ◽  
Vol 9 (22) ◽  
pp. 8799-8811 ◽  
Author(s):  
P. Di Girolamo ◽  
D. Summa ◽  
R.-F. Lin ◽  
T. Maestri ◽  
R. Rizzi ◽  
...  
Keyword(s):  
Relative Humidity ◽  
Cloud Model ◽  
Cirrus Clouds ◽  
Cloud Layer ◽  
Cirrus Cloud ◽  
Raman Lidar ◽  
Heating Rates ◽  
Night Time ◽  
Microphysical Properties ◽  
Lidar Measurements

Abstract. Raman lidar measurements performed in Potenza by the Raman lidar system BASIL in the presence of cirrus clouds are discussed. Measurements were performed on 6 September 2004 in the frame of the Italian phase of the EAQUATE Experiment. The major feature of BASIL is represented by its capability to perform high-resolution and accurate measurements of atmospheric temperature and water vapour, and consequently relative humidity, both in daytime and night-time, based on the application of the rotational and vibrational Raman lidar techniques in the UV. BASIL is also capable to provide measurements of the particle backscatter and extinction coefficient, and consequently lidar ratio (at the time of these measurements, only at one wavelength), which are fundamental to infer geometrical and microphysical properties of clouds. A case study is discussed in order to assess the capability of Raman lidars to measure humidity in presence of cirrus clouds, both below and inside the cloud. While air inside the cloud layers is observed to be always under-saturated with respect to water, both ice super-saturation and under-saturation conditions are found inside these clouds. Upper tropospheric moistening is observed below the lower cloud layer. The synergic use of the data derived from the ground based Raman Lidar and of spectral radiances measured by the NAST-I Airborne Spectrometer allows the determination of the temporal evolution of the atmospheric cooling/heating rates due to the presence of the cirrus cloud. Lidar measurements beneath the cirrus cloud layer have been interpreted using a 1-D cirrus cloud model with explicit microphysics. The 1-D simulations indicate that sedimentation-moistening has contributed significantly to the moist anomaly, but other mechanisms are also contributing. This result supports the hypothesis that the observed mid-tropospheric humidification is a real feature which is strongly influenced by the sublimation of precipitating ice crystals. Results illustrated in this study demonstrate that Raman lidars, like the one used in this study, can resolve the spatial and temporal scales required for the study of cirrus cloud microphysical processes and appear sensitive enough to reveal and quantify upper tropospheric humidification associated with cirrus cloud sublimation.

scholarly journals UV Raman lidar measurements of relative humidity for the characterization of cirrus cloud microphysical properties

2009 ◽  
Vol 9 (4) ◽  
pp. 14735-14769 ◽  
Author(s):  
P. Di Girolamo ◽  
D. Summa ◽  
R.-F. Lin ◽  
T. Maestri ◽  
R. Rizzi ◽  
...  
Keyword(s):  
Relative Humidity ◽  
Cloud Model ◽  
Cirrus Clouds ◽  
Cloud Layer ◽  
Cirrus Cloud ◽  
Raman Lidar ◽  
Heating Rates ◽  
Night Time ◽  
Microphysical Properties ◽  
Lidar Measurements

Abstract. Raman lidar measurements performed in Potenza by the Raman lidar system BASIL in the presence of cirrus clouds are discussed. Measurements were performed on 6 September 2004 in the frame of Italian phase of the EAQUATE Experiment. The major feature of BASIL is represented by its capability to perform high-resolution and accurate measurements of atmospheric temperature and water vapour, and consequently relative humidity, both in daytime and night-time, based on the application of the rotational and vibrational Raman lidar techniques in the UV. BASIL is also capable to provide measurements of the particle backscatter and extinction coefficient, and consequently lidar ratio (at the time of these measurements only at one wavelength), which are fundamental to infer geometrical and microphysical properties of clouds. A case study is discussed in order to assess the capability of Raman lidars to measure humidity in presence of cirrus clouds, both below and inside the cloud. While air inside the cloud layers is observed to be always under-saturated with respect to water, both ice super-saturation and under-saturation conditions are found inside these clouds. Upper tropospheric moistening is observed below the lower cloud layer. The synergic use of the data derived from the ground based Raman Lidar and of spectral radiances measured by the NAST-I Airborne Spectrometer allows to determine the temporal evolution of the atmospheric cooling/heating rates due to the presence of the cirrus cloud anvil. Lidar measurements beneath the cirrus cloud layer have been interpreted using a 1-D cirrus cloud model with explicit microphysics. The 1-D simulations indicates that sedimentation-moistening has contributed significantly to the moist anomaly, but other mechanisms are also contributing. This result supports the hypothesis that the observed mid-tropospheric humidification is a real feature which is strongly influenced by the sublimation of precipitating ice crystals. Results illustrated in this study demonstrate that Raman lidars, like the one used in this study, can resolve the spatial and temporal scales required for the study of cirrus cloud microphysical processes and appears sensitive enough to reveal and quantify upper tropospheric humidification associated with cirrus cloud sublimation.

scholarly journals Tropospheric water vapour and relative humidity profiles from lidar and microwave radiometry

2014 ◽  
Vol 7 (5) ◽  
pp. 1201-1211 ◽  
Author(s):  
F. Navas-Guzmán ◽  
J. Fernández-Gálvez ◽  
M. J. Granados-Muñoz ◽  
J. L. Guerrero-Rascado ◽  
J. A. Bravo-Aranda ◽  
...  
Keyword(s):  
Relative Humidity ◽  
Water Vapour ◽  
Microwave Radiometer ◽  
Radiosonde Data ◽  
Mixing Ratio ◽  
Raman Lidar ◽  
Night Time ◽  
New Approach ◽  
Lidar Measurements ◽  
Humidity Profiles

Abstract. In this paper, we outline an iterative method to calibrate the water vapour mixing ratio profiles retrieved from Raman lidar measurements. Simultaneous and co-located radiosonde data are used for this purpose and the calibration results obtained during a radiosonde campaign in summer and autumn 2011 are presented. The water vapour profiles measured during night-time by the Raman lidar and radiosondes are compared and the differences between the methodologies are discussed. Then, a new approach to obtain relative humidity profiles by combination of simultaneous profiles of temperature (retrieved from a microwave radiometer) and water vapour mixing ratio (from a Raman lidar) is addressed. In the last part of this work, a statistical analysis of water vapour mixing ratio and relative humidity profiles obtained during 1 year of simultaneous measurements is presented.

scholarly journals Lidar observation and model simulation of a volcanic-ash-induced cirrus cloud during the Eyjafjallajökull eruption

2012 ◽  
Vol 12 (6) ◽  
pp. 15675-15707 ◽  
Author(s):  
C. Rolf ◽  
M. Krämer ◽  
C. Schiller ◽  
M. Hildebrandt ◽  
M. Riese
Keyword(s):  
Volcanic Ash ◽  
Model Simulation ◽  
Cirrus Cloud ◽  
Backward Trajectories ◽  
Microphysical Properties ◽  
Ice Nuclei ◽  
A Value ◽  
Lidar Measurements ◽  
Before And After ◽  
Western Germany

Abstract. Heterogeneous ice formation induced by volcanic ash from the Eyjafjallajökull volcano eruption in April 2010 is investigated based on the combination of a cirrus cloud observed with a backscatter lidar over Jülich (Western Germany) and model simulations along backward trajectories. The microphysical properties of the cirrus cloud could only be represented by the microphysical model under the assumption of an enhanced number of efficient ice nuclei originating from the volcanic eruption. The ice nuclei (IN) concentration determined by lidar measurements directly before and after cirrus cloud occurrence implies a value of around 0.1 cm−3 (in comparison clean IN conditions: 0.01 cm−3). This leads to a cirrus cloud with rather small ice crystals having a mean radius of 12 μm and a modification of the ice particle number (0.08 cm−3 instead of 3 × 10−4 cm−3 under clean IN conditions). The effectiveness of ice nuclei was estimated by the use of the microphysical model and the backward trajectories based on ECMWF data, establishing a freezing threshold of around 105% relative humidity with respect to ice in a temperature range from −45 to −55 °C. Only with these highly efficient ice nuclei was it possible for the cirrus cloud to be formed in a slightly supersaturated environment.

Dynamic Processes in Cirrus Clouds: Concepts and Models

Cirrus ◽  
2002 ◽  
Author(s):  
David O’C. Starr ◽  
Markus Quante
Keyword(s):  
Cirrus Clouds ◽  
Radiative Properties ◽  
Cirrus Cloud ◽  
Early Model ◽  
Minimum Requirement ◽  
Microphysical Properties ◽  
Cloud Properties ◽  
Cloud Models ◽  
New Concepts

Advancement in the understanding of cirrus clouds and their life cycle comes through symbiotic use of models, observations, and related concepts (fig. 18.1). Models of cirrus clouds represent an integration of our knowledge of cirrus cloud properties and processes. They provide a capacity to extend knowledge and enhance understanding in ways that complement existing observational capabilities. Models can be used to develop new theories, such as parameterizations, and focus science issues and observational requirements and developments. For example, early model results of Starr and Cox (1985a) and Starr (1987b) predicted that fine cellular structure (~lkm or less) would be found in the upper part of extended stratiform cirrus clouds. This prediction was confirmed when high-frequency sensors were deployed both for active remote sensing (Sassen et al. 1990a, 1995) and later for in-situ measurements (Quante and Brown 1992; Gultepe et al. 1995; Quante et al. 1996). Sampling rates of 10Hz, or better, are now accepted as a minimum requirement for resolving cirrus cloud internal structure and circulation where 1-Hz or coarser measurements were previously used. Similarly, discrepancies between observed cloud radiative properties and calculations (theory) based on corresponding in-situ observations of cloud microphysical properties (Sassen et al. 1990b) led to the development of improved observing capabilities for small ice crystals (Arnott et al. 1994; Miloshevich and Heymsfield 1997; Lawson et al. 1998). Such sensors are now regarded as part of the standard complement when doing in-situ microphysical measurements in cirrus. At the same time, observations are absolutely essential in developing and evaluating cloud models. No cloud modeler wants to apply a model or theory too far beyond the limits of what can be observationally confirmed, at least in gross terms. The third aspect of this triad is concepts. Although models and observations can lead to predictions or diagnosis of unexpected relationships, they are each limited by the concepts that were used in their design and/or implementation. In the end, new concepts arising from analogy to other phenomena and/or from synergistic integration of existing knowledge can lead to new understanding, new models, new instruments, and new sampling strategies (fig. 18.1). Chapter 17 focuses on observations of internal cloud circulation and structure.

Ground-based Remote Sensing of Cirrus Clouds

Cirrus ◽  
2002 ◽  
Author(s):  
Kenneth Sassen ◽  
Gerald Mace
Keyword(s):  
Remote Sensing ◽  
Multispectral Imaging ◽  
Cirrus Clouds ◽  
Radiative Energy ◽  
Radiation Balance ◽  
Cirrus Cloud ◽  
Microphysical Properties ◽  
Research Aircraft ◽  
Cloud Modeling

Cirrus clouds have only recently been recognized as having a significant influence on weather and climate through their impact on the radiative energy budget of the atmosphere. In addition, the unique difficulties presented by the study of cirrus put them on the “back burner” of atmospheric research for much of the twentieth century. Foremost, because they inhabit the frigid upper troposphere, their inaccessibility has hampered intensive research. Other factors have included a lack of in situ instrumentation to effectively sample the clouds and environment, and basic uncertainties in the underlying physics of ice cloud formation, growth, and maintenance. Cloud systems that produced precipitation, severe weather, or hazards to aviation were deemed more worthy of research support until the mid- 1980s. Beginning at this time, however, major field research programs such as the First ISCCP (International Satellite Cloud Climatology Program) Regional Experiment (FIRE; Cox et al. 1987), International Cirrus Experiment (ICE; Raschke et al. 1990), Experimental Cloud Lidar Pilot Study (ECLIPS; Platt et al. 1994), and the Atmospheric Radiation Measurement (ARM) Program (Stokes and Schwartz 1994) have concentrated on cirrus cloud research, relying heavily on ground-based remote sensing observations combined with research aircraft. What has caused this change in research emphasis is an appreciation for the potentially significant role that cirrus play in maintaining the radiation balance of the earth-atmosphere system (Liou 1986). As climate change issues were treated more seriously, it was recognized that the effects, or feedbacks, of extensive high-level ice clouds in response to global warming could be pivotal. This fortunately came at a time when new generations of meteorological instrumentation were becoming available. Beginning in the early 1970s, major advancements were made in the fields of numerical cloud modeling and cloud measurements using aircraft probes, satellite multispectral imaging, and remote sensing with lidar, short-wavelength radar, and radiometers, all greatly facilitating cirrus research. Each of these experimental approaches have their advantages and drawbacks, and it should also be noted that a successful cloud modeling effort relies on field data for establishing boundary conditions and providing case studies for validation. Although the technologies created for in situ aircraft measurements can clearly provide unique knowledge of cirrus cloud thermodynamic and microphysical properties (Dowling and Radke 1990), available probes may suffer from limitations in their response to the wide range of cirrus particles and actually sample a rather small volume of cloud during any mission.

scholarly journals CADEX and beyond: Installation of a new PollyXT site in Dushanbe

2019 ◽  
Vol 99 ◽  
pp. 02010
Author(s):  
Ronny Engelmann ◽  
Julian Hofer ◽  
Abduvosit N. Makhmudov ◽  
Holger Baars ◽  
Karsten Hanbuch ◽  
...  
Keyword(s):  
Asian Dust ◽  
Raman Lidar ◽  
Technical Institute ◽  
Lidar System ◽  
Microphysical Properties ◽  
Source Regions ◽  
Central Asian ◽  
Lidar Measurements ◽  
Academy Of Sciences

During the 18-month Central Asian Dust Experiment we conducted continuous lidar measurements at the Physical Technical Institute of the Academy of Sciences of Tajikistan in Dushanbe between 2015 and 2016. Mineral dust plumes from various source regions have been observed and characterized in terms of their occurrence, and their optical and microphysical properties with the Raman lidar PollyXT. Currently a new container-based lidar system is constructed which will be installed for continuous long-term measurements in Dushanbe.

scholarly journals Freezing thresholds and cirrus cloud formation mechanisms inferred from in situ measurements of relative humidity

2003 ◽  
Vol 3 (5) ◽  
pp. 1791-1806 ◽  
Author(s):  
W. Haag ◽  
B. Kärcher ◽  
J. Ström ◽  
A. Minikin ◽  
U. Lohmann ◽  
...  
Keyword(s):  
Relative Humidity ◽  
Large Scale ◽  
Climate Model ◽  
Global Climate Model ◽  
In Situ Measurements ◽  
Cirrus Clouds ◽  
Formation Mechanisms ◽  
Cirrus Cloud ◽  
Homogeneous Freezing

Abstract. Factors controlling the microphysical link between distributions of relative humidity above ice saturation in the upper troposphere and lowermost stratosphere and cirrus clouds are examined with the help of microphysical trajectory simulations. Our findings are related to results from aircraft measurements and global model studies. We suggest that the relative humidities at which ice crystals form in the atmosphere can be inferred from in situ measurements of water vapor and temperature close to, but outside of, cirrus clouds. The comparison with concomitant measurements performed inside cirrus clouds provides a clue to freezing mechanisms active in cirrus. The analysis of field data taken at northern and southern midlatitudes in fall 2000 reveals distinct differences in cirrus cloud freezing thresholds. Homogeneous freezing is found to be the most likely mechanism by which cirrus form at southern hemisphere midlatitudes. The results provide evidence for the existence of heterogeneous freezing in cirrus in parts of the polluted northern hemisphere, but do not suggest that cirrus clouds in this region form exclusively on heterogeneous ice nuclei, thereby emphasizing the crucial importance of homogeneous freezing. The key features of distributions of upper tropospheric relative humidity simulated by a global climate model are shown to be in general agreement with both, microphysical simulations and field observations, delineating a feasible method to include and validate ice supersaturation in other large-scale atmospheric models, in particular chemistry-transport and weather forecast models.

Dual-field-of-view Raman lidar measurements for the retrieval of cloud microphysical properties

2013 ◽  
Vol 52 (11) ◽  
pp. 2235 ◽  
Author(s):  
Jörg Schmidt ◽  
Ulla Wandinger ◽  
Aleksey Malinka
Keyword(s):  
Field Of View ◽  
Raman Lidar ◽  
Microphysical Properties ◽  
Lidar Measurements

scholarly journals Tropospheric water vapour and relative humidity profiles from lidar and microwave radiometry

2013 ◽  
Vol 6 (6) ◽  
pp. 10481-10510
Author(s):  
F. Navas-Guzmán ◽  
J. Fernández-Gálvez ◽  
M. J. Granados-Muñoz ◽  
J. L. Guerrero-Rascado ◽  
J. A. Bravo-Aranda ◽  
...  
Keyword(s):  
Relative Humidity ◽  
Water Vapour ◽  
Microwave Radiometer ◽  
Radiosonde Data ◽  
Mixing Ratio ◽  
Raman Lidar ◽  
New Approach ◽  
Lidar Measurements ◽  
One Year ◽  
Humidity Profiles

Abstract. In this paper, we outline an iterative method to calibrate the water vapour mixing ratio profiles retrieved from Raman lidar measurements. Simultaneous and co-located radiosonde data are used for this purpose and the calibration results obtained during a radiosonde campaign performed in Summer and Autumn 2011 are presented. The water vapour profiles measured during nighttime by the Raman lidar and radiosondes are compared and the differences between the methodologies are discussed. Moreover, a new approach to obtain relative humidity profiles by combination of simultaneous profiles of temperature (retrieved from a microwave radiometer) and water vapour mixing ratio (from a Raman lidar) is addressed. In the last part of this work, a statistical analysis of water vapour mixing ratio and relative humidity profiles obtained during one year of simultaneous measurements is presented.

scholarly journals Subvisible cirrus clouds – a dynamical system approach

2016 ◽  
Author(s):  
E. J. Spreitzer ◽  
M. P. Marschalik ◽  
P. Spichtinger
Keyword(s):  
Cloud Model ◽  
Three Dimensional ◽  
Complex Model ◽  
Cirrus Clouds ◽  
Diffusional Growth ◽  
Ice Clouds ◽  
Formation Pathway ◽  
Microphysical Properties ◽  
Tropopause Region ◽  
Homogeneous Freezing

Abstract. Ice clouds, so-called cirrus clouds, occur very frequently in the tropopause region. A special class are subvisible cirrus clouds with an optical depth lower than 0.03. Obviously, the ice crystal number concentration of these clouds is very low. The dominant pathway for these clouds is not known well. It is often assumed that heterogeneous nucleation at solid aerosol particles is the preferred mechanism although homogeneous freezing of aqueous solution droplets might be possible. For investigating subvisible cirrus clouds as formed by homogeneous freezing we develop a simple analytical cloud model from first principles; the model consists of a three dimensional set of ordinary differential equations, including the relevant processes as ice nucleation, diffusional growth and sedimentation, respectively. The model is integrated numerically and is investigated using theory of dynamical systems. We found two different states for the long-term behaviour of subvisible cirrus clouds, i.e. an attractor case and a limit cycle scenario. The transition between the states constitutes a Hopf bifurcation and is determined by environmental conditions as vertical updraughts and temperature. In both cases, the microphysical properties of the simulated clouds agree reasonably well with simulations using a complex model, with former analytical studies and with observations of subvisible cirrus. In addition, the model can also be used for explaining complex model simulations close to the bifurcation qualitatively. Finally, the results indicate that homogeneous nucleation might be a possible formation pathway for subvisible cirrus clouds.

Sign in / Sign up

Export Citation Format

Share Document