scholarly journals Impact of transport model errors on the global and regional methane emissions estimated by inverse modelling

2013 ◽  
Vol 13 (4) ◽  
pp. 10961-11021
Author(s):  
R. Locatelli ◽  
P. Bousquet ◽  
F. Chevallier ◽  
A. Fortems-Cheney ◽  
S. Szopa ◽  
...  
Keyword(s):  
Transport Model ◽  
Atmospheric Transport ◽  
Spatial Scales ◽  
Global Scale ◽  
Methane Emissions ◽  
Inverse Modelling ◽  
Model Errors ◽  
Inverse Systems ◽  
Set Up ◽  
The Impact

Abstract. A modelling experiment has been conceived to assess the impact of transport model errors on the methane emissions estimated by an atmospheric inversion system. Synthetic methane observations, given by 10 different model outputs from the international TransCom-CH4 model exercise, are combined with a prior scenario of methane emissions and sinks, and integrated into the PYVAR-LMDZ-SACS inverse system to produce 10 different methane emission estimates at the global scale for the year 2005. The same set-up has been used to produce the synthetic observations and to compute flux estimates by inverse modelling, which means that only differences in the modelling of atmospheric transport may cause differences in the estimated fluxes. In our framework, we show that transport model errors lead to a discrepancy of 27 Tg CH4 per year at the global scale, representing 5% of the total methane emissions. At continental and yearly scales, transport model errors have bigger impacts depending on the region, ranging from 36 Tg CH4 in north America to 7 Tg CH4 in Boreal Eurasian (from 23% to 48%). At the model gridbox scale, the spread of inverse estimates can even reach 150% of the prior flux. Thus, transport model errors contribute to significant uncertainties on the methane estimates by inverse modelling, especially when small spatial scales are invoked. Sensitivity tests have been carried out to estimate the impact of the measurement network and the advantage of higher resolution models. The analysis of methane estimated fluxes in these different configurations questions the consistency of transport model errors in current inverse systems. For future methane inversions, an improvement in the modelling of the atmospheric transport would make the estimations more accurate. Likewise, errors of the observation covariance matrix should be more consistently prescribed in future inversions in order to limit the impact of transport model errors on estimated methane fluxes.

scholarly journals Impact of transport model errors on the global and regional methane emissions estimated by inverse modelling

2013 ◽  
Vol 13 (19) ◽  
pp. 9917-9937 ◽  
Author(s):  
R. Locatelli ◽  
P. Bousquet ◽  
F. Chevallier ◽  
A. Fortems-Cheney ◽  
S. Szopa ◽  
...  
Keyword(s):  
Atmospheric Chemistry ◽  
Transport Model ◽  
Initial Conditions ◽  
Spatial Scales ◽  
Global Scale ◽  
Methane Emissions ◽  
Inverse Modelling ◽  
Model Errors ◽  
Inverse Systems ◽  
The Impact

Abstract. A modelling experiment has been conceived to assess the impact of transport model errors on methane emissions estimated in an atmospheric inversion system. Synthetic methane observations, obtained from 10 different model outputs from the international TransCom-CH4 model inter-comparison exercise, are combined with a prior scenario of methane emissions and sinks, and integrated into the three-component PYVAR-LMDZ-SACS (PYthon VARiational-Laboratoire de Météorologie Dynamique model with Zooming capability-Simplified Atmospheric Chemistry System) inversion system to produce 10 different methane emission estimates at the global scale for the year 2005. The same methane sinks, emissions and initial conditions have been applied to produce the 10 synthetic observation datasets. The same inversion set-up (statistical errors, prior emissions, inverse procedure) is then applied to derive flux estimates by inverse modelling. Consequently, only differences in the modelling of atmospheric transport may cause differences in the estimated fluxes. In our framework, we show that transport model errors lead to a discrepancy of 27 Tg yr−1 at the global scale, representing 5% of total methane emissions. At continental and annual scales, transport model errors are proportionally larger than at the global scale, with errors ranging from 36 Tg yr−1 in North America to 7 Tg yr−1 in Boreal Eurasia (from 23 to 48%, respectively). At the model grid-scale, the spread of inverse estimates can reach 150% of the prior flux. Therefore, transport model errors contribute significantly to overall uncertainties in emission estimates by inverse modelling, especially when small spatial scales are examined. Sensitivity tests have been carried out to estimate the impact of the measurement network and the advantage of higher horizontal resolution in transport models. The large differences found between methane flux estimates inferred in these different configurations highly question the consistency of transport model errors in current inverse systems. Future inversions should include more accurately prescribed observation covariances matrices in order to limit the impact of transport model errors on estimated methane fluxes.

scholarly journals Sensitivity of the recent methane budget to LMDz sub-grid scale physical parameterizations

2015 ◽  
Vol 15 (8) ◽  
pp. 11853-11888
Author(s):  
R. Locatelli ◽  
P. Bousquet ◽  
M. Saunois ◽  
F. Chevallier ◽  
C. Cressot
Keyword(s):  
Satellite Data ◽  
Transport Model ◽  
Deep Convection ◽  
Chemical Transport ◽  
Global Scale ◽  
Methane Emissions ◽  
Inverse Modelling ◽  
Chemical Transport Model ◽  
Methane Budget ◽  
Physical Parameterizations

Abstract. With the densification of surface observing networks and the development of remote sensing of greenhouse gases from space, estimations of methane (CH4) sources and sinks by inverse modelling face new challenges. Indeed, the chemical transport model used to link the flux space with the mixing ratio space must be able to represent these different types of constraints for providing consistent flux estimations. Here we quantify the impact of sub-grid scale physical parameterization errors on the global methane budget inferred by inverse modelling using the same inversion set-up but different physical parameterizations within one chemical-transport model. Two different schemes for vertical diffusion, two others for deep convection, and one additional for thermals in the planetary boundary layer are tested. Different atmospheric methane datasets are used as constraints (surface observations or satellite retrievals). At the global scale, methane emissions differ, on average, from 4.1 Tg CH4 per year due to the use of different sub-grid scale parameterizations. Inversions using satellite total-column retrieved by GOSAT satellite are less impacted, at the global scale, by errors in physical parameterizations. Focusing on large-scale atmospheric transport, we show that inversions using the deep convection scheme of Emanuel (1991) derive smaller interhemispheric gradient in methane emissions. At regional scale, the use of different sub-grid scale parameterizations induces uncertainties ranging from 1.2 (2.7%) to 9.4% (14.2%) of methane emissions in Africa and Eurasia Boreal respectively when using only surface measurements from the background (extended) surface network. When using only satellite data, we show that the small biases found in inversions using GOSAT-CH4 data and a coarser version of the transport model were actually masking a poor representation of the stratosphere–troposphere gradient in the model. Improving the stratosphere–troposphere gradient reveals a larger bias in GOSAT-CH4 satellite data, which largely amplifies inconsistencies between surface and satellite inversions. A simple bias correction is proposed. The results of this work provide the level of confidence one can have for recent methane inversions relatively to physical parameterizations included in chemical-transport models.

scholarly journals The importance of transport model uncertainties for the estimation of CO<sub>2</sub> sources and sinks using satellite measurements

2010 ◽  
Vol 10 (20) ◽  
pp. 9981-9992 ◽  
Author(s):  
S. Houweling ◽  
I. Aben ◽  
F.-M. Breon ◽  
F. Chevallier ◽  
N. Deutscher ◽  
...  
Keyword(s):  
Transport Model ◽  
Atmospheric Transport ◽  
A Priori ◽  
Model Errors ◽  
Tracer Transport ◽  
Satellite Measurements ◽  
Transport Models ◽  
Sources And Sinks ◽  
The Impact ◽  
Ppm Level

Abstract. This study presents a synthetic model intercomparison to investigate the importance of transport model errors for estimating the sources and sinks of CO2 using satellite measurements. The experiments were designed for testing the potential performance of the proposed CO2 lidar A-SCOPE, but also apply to other space borne missions that monitor total column CO2. The participating transport models IFS, LMDZ, TM3, and TM5 were run in forward and inverse mode using common a priori CO2 fluxes and initial concentrations. Forward simulations of column averaged CO2 (xCO2) mixing ratios vary between the models by σ=0.5 ppm over the continents and σ=0.27 ppm over the oceans. Despite the fact that the models agree on average on the sub-ppm level, these modest differences nevertheless lead to significant discrepancies in the inverted fluxes of 0.1 PgC/yr per 106 km2 over land and 0.03 PgC/yr per 106 km2 over the ocean. These transport model induced flux uncertainties exceed the target requirement that was formulated for the A-SCOPE mission of 0.02 PgC/yr per 106 km2, and could also limit the overall performance of other CO2 missions such as GOSAT. A variable, but overall encouraging agreement is found in comparison with FTS measurements at Park Falls, Darwin, Spitsbergen, and Bremen, although systematic differences are found exceeding the 0.5 ppm level. Because of this, our estimate of the impact of transport model uncerainty is likely to be conservative. It is concluded that to make use of the remote sensing technique for quantifying the sources and sinks of CO2 not only requires highly accurate satellite instruments, but also puts stringent requirements on the performance of atmospheric transport models. Improving the accuracy of these models should receive high priority, which calls for a closer collaboration between experts in atmospheric dynamics and tracer transport.

scholarly journals The constraint of CO<sub>2</sub> measurements made onboard passenger aircraft on surface-atmosphere fluxes: the impact of transport model errors in vertical mixing

2016 ◽  
Author(s):  
Shreeya Verma ◽  
Julia Marshall ◽  
Christoph Gerbig ◽  
Christian Roedenbeck ◽  
Kai Uwe Totsche
Keyword(s):  
Transport Model ◽  
Atmospheric Transport ◽  
Vertical Mixing ◽  
Synthetic Data ◽  
Vertical Profiles ◽  
Model Errors ◽  
Transport Models ◽  
Boundary Layer Height ◽  
Temporal Sampling ◽  
The Impact

Abstract. Inaccurate representation of atmospheric processes by transport models is a dominant source of uncertainty in inverse analyses and can lead to large discrepancies in the retrieved flux estimates. We investigate the impact of uncertainties in vertical transport as simulated by atmospheric transport models on fluxes retrieved using vertical profiles from aircraft as an observational constraint. Our numerical experiments are based on synthetic data with realistic spatial and temporal sampling of aircraft measurements. The impact of such uncertainties on the flux retrieved using the ground-based network with those retrieved using the aircraft profiles are compared. We find that the posterior flux retrieved using aircraft profiles is less susceptible to errors in boundary layer height as compared to the ground- based network. This highlights the benefit of utilizing atmospheric observations made onboard aircraft over surface measurements for flux estimation using inverse methods. We further use synthetic vertical profiles of CO2 in an inversion to estimate the potential of these measurements, which will be made available through the IAGOS (In-Service Aircraft for a Global Observing System) project in future, in constraining the regional carbon budget. Our results show that the regions tropical Africa and temperate Eurasia, that are under constrained by the existing surface based network, will benefit the most from these measurements, the reduction of posterior flux uncertainty being about 7 to 10 %.

scholarly journals Sensitivity of the recent methane budget to LMDz sub-grid-scale physical parameterizations

2015 ◽  
Vol 15 (17) ◽  
pp. 9765-9780 ◽  
Author(s):  
R. Locatelli ◽  
P. Bousquet ◽  
M. Saunois ◽  
F. Chevallier ◽  
C. Cressot
Keyword(s):  
Inverse Modeling ◽  
Transport Model ◽  
Atmospheric Transport ◽  
Deep Convection ◽  
Regional Scale ◽  
Global Scale ◽  
Methane Emissions ◽  
Data Sets ◽  
Methane Budget ◽  
Physical Parameterizations

Abstract. With the densification of surface observing networks and the development of remote sensing of greenhouse gases from space, estimations of methane (CH4) sources and sinks by inverse modeling are gaining additional constraining data but facing new challenges. The chemical transport model (CTM) linking the flux space to methane mixing ratio space must be able to represent these different types of atmospheric constraints for providing consistent flux estimations. Here we quantify the impact of sub-grid-scale physical parameterization errors on the global methane budget inferred by inverse modeling. We use the same inversion setup but different physical parameterizations within one CTM. Two different schemes for vertical diffusion, two others for deep convection, and one additional for thermals in the planetary boundary layer (PBL) are tested. Different atmospheric methane data sets are used as constraints (surface observations or satellite retrievals). At the global scale, methane emissions differ, on average, from 4.1 Tg CH4 per year due to the use of different sub-grid-scale parameterizations. Inversions using satellite total-column mixing ratios retrieved by GOSAT are less impacted, at the global scale, by errors in physical parameterizations. Focusing on large-scale atmospheric transport, we show that inversions using the deep convection scheme of Emanuel (1991) derive smaller interhemispheric gradients in methane emissions, indicating a slower interhemispheric exchange. At regional scale, the use of different sub-grid-scale parameterizations induces uncertainties ranging from 1.2 % (2.7 %) to 9.4 % (14.2 %) of methane emissions when using only surface measurements from a background (or an extended) surface network. Moreover, spatial distribution of methane emissions at regional scale can be very different, depending on both the physical parameterizations used for the modeling of the atmospheric transport and the observation data sets used to constrain the inverse system. When using only satellite data from GOSAT, we show that the small biases found in inversions using a coarser version of the transport model are actually masking a poor representation of the stratosphere–troposphere methane gradient in the model. Improving the stratosphere–troposphere gradient reveals a larger bias in GOSAT CH4 satellite data, which largely amplifies inconsistencies between the surface and satellite inversions. A simple bias correction is proposed. The results of this work provide the level of confidence one can have for recent methane inversions relative to physical parameterizations included in CTMs.

scholarly journals The constraint of CO<sub>2</sub> measurements made onboard passenger aircraft on surface–atmosphere fluxes: the impact of transport model errors in vertical mixing

2017 ◽  
Vol 17 (9) ◽  
pp. 5665-5675 ◽  
Author(s):  
Shreeya Verma ◽  
Julia Marshall ◽  
Christoph Gerbig ◽  
Christian Rödenbeck ◽  
Kai Uwe Totsche
Keyword(s):  
Transport Model ◽  
Atmospheric Transport ◽  
Vertical Mixing ◽  
Synthetic Data ◽  
Vertical Profiles ◽  
Model Errors ◽  
Transport Models ◽  
Boundary Layer Height ◽  
Temporal Sampling ◽  
The Impact

Abstract. Inaccurate representation of atmospheric processes by transport models is a dominant source of uncertainty in inverse analyses and can lead to large discrepancies in the retrieved flux estimates. We investigate the impact of uncertainties in vertical transport as simulated by atmospheric transport models on fluxes retrieved using vertical profiles from aircraft as an observational constraint. Our numerical experiments are based on synthetic data with realistic spatial and temporal sampling of aircraft measurements. The impact of such uncertainties on the flux retrieved using the ground-based network and those retrieved using the aircraft profiles are compared. We find that the posterior flux retrieved using aircraft profiles is less susceptible to errors in boundary layer height, compared to the ground-based network. This finding highlights a benefit of utilizing atmospheric observations made onboard aircraft over surface measurements for flux estimation using inverse methods. We further use synthetic vertical profiles of CO2 in an inversion to estimate the potential of these measurements, which will be made available through the IAGOS (In-service Aircraft for a Global Observing System) project in the future, in constraining the regional carbon budget. Our results show that the regions of tropical Africa and temperate Eurasia, that are under-constrained by the existing surface-based network, will benefit the most from these measurements, with a reduction of posterior flux uncertainty of about 7 to 10 %.

scholarly journals The Environmental Effects of the April 2020 Wildfires and the Cs-137 Re-Suspension in the Chernobyl Exclusion Zone: A Multi-Hazard Threat

Atmosphere ◽  
2021 ◽  
Vol 12 (4) ◽  
pp. 467
Author(s):  
Rocío Baró ◽  
Christian Maurer ◽  
Jerome Brioude ◽  
Delia Arnold ◽  
Marcus Hirtl
Keyword(s):  
Air Quality ◽  
Nuclear Power ◽  
Transport Model ◽  
Atmospheric Transport ◽  
Point Of View ◽  
Plume Dispersion ◽  
Exclusion Zone ◽  
Fire Plume ◽  
Mean Values ◽  
The Impact

This paper demonstrates the environmental impacts of the wildfires occurring at the beginning of April 2020 in and around the highly contaminated Chernobyl Exclusion Zone (CEZ). Due to the critical fire location, concerns arose about secondary radioactive contamination potentially spreading over Europe. The impact of the fire was assessed through the evaluation of fire plume dispersion and re-suspension of the radionuclide Cs-137, whereas, to assess the smoke plume effect, a WRF-Chem simulation was performed and compared to Tropospheric Monitoring Instrument (TROPOMI) satellite columns. The results show agreement of the simulated black carbon and carbon monoxide plumes with the plumes as observed by TROPOMI, where pollutants were also transported to Belarus. From an air quality and health perspective, the wildfires caused extremely bad air quality over Kiev, where the WRF-Chem model simulated mean values of PM2.5 up to 300 µg/m3 (during the first fire outbreak) over CEZ. The re-suspension of Cs-137 was assessed by a Bayesian inverse modelling approach using FLEXPART as the atmospheric transport model and Ukraine observations, yielding a total release of 600 ± 200 GBq. The increase in both smoke and Cs-137 emissions was only well correlated on the 9 April, likely related to a shift of the focus area of the fires. From a radiological point of view even the highest Cs-137 values (average measured or modelled air concentrations and modelled deposition) at the measurement site closest to the Chernobyl Nuclear Power Plant, i.e., Kiev, posed no health risk.

scholarly journals Influences of hydroxyl radicals (OH) on top-down estimates of the global and regional methane budgets

2020 ◽  
Author(s):  
Yuanhong Zhao ◽  
Marielle Saunois ◽  
Philippe Bousquet ◽  
Xin Lin ◽  
Antoine Berchet ◽  
...  
Keyword(s):  
Spatial Distribution ◽  
Climate Models ◽  
Transport Model ◽  
Atmospheric Transport ◽  
Temporal Variations ◽  
Oh Radicals ◽  
Chemical Transport Model ◽  
Top Down ◽  
Ch4 Emissions ◽  
The Impact

Abstract. The hydroxyl radical (OH), which is the dominant sink of methane (CH4), plays a key role to close the global methane budget. Previous research that assessed the impact of OH changes on the CH4 budget mostly relied on box modeling inversions with a very simplified atmospheric transport and no representation of the heterogeneous spatial distribution of OH radicals. Here using a variational Bayesian inversion framework and a 3D chemical transport model, LMDz, combined with 10 different OH fields derived from chemistry-climate models (CCMI experiment), we evaluate the influence of OH burden, spatial distribution, and temporal variations on the global CH4 budget. The global tropospheric mean CH4-reaction-weighted [OH] ([OH]GM-CH4) ranges 10.3–16.3 × 105 molec cm−3 across 10 OH fields during the early 2000s, resulting in inversion-based global CH4 emissions between 518 and 757 Tg yr−1. The uncertainties in CH4 inversions induced by the different OH fields are comparable to, or even larger than the uncertainty typically given by bottom-up and top-down estimates. Based on the LMDz inversions, we estimate that a 1 %-increase in OH burden leads to an increase of 4 Tg yr−1 in the estimate of global methane emissions, which is about 25 % smaller than what is estimated by box-models. The uncertainties in emissions induced by OH are largest over South America, corresponding to large inter-model differences of [OH] in this region. From the early to the late 2000s, the optimized CH4 emissions increased by 21.9 ± 5.7 Tg yr−1 (16.6–30.0 Tg yr−1), of which ~ 25 % (on average) is contributed by −0.5 to +1.8 % increase in OH burden. If the CCMI models represent the OH trend properly over the 2000s, our results show that a higher increasing trend of CH4 emissions is needed to match the CH4 observations compared to the CH4 emission trend derived using constant OH. This study strengthens the importance to reach a better representation of OH burden and of OH spatial and temporal distributions to reduce the uncertainties on the global CH4 budget.

scholarly journals Global-scale drought risk assessment for agricultural systems

2019 ◽  
Author(s):  
Isabel Meza ◽  
Stefan Siebert ◽  
Petra Döll ◽  
Jürgen Kusche ◽  
Claudia Herbert ◽  
...  
Keyword(s):  
Spatial Scales ◽  
Global Scale ◽  
Drought Indices ◽  
Drought Risk ◽  
Agricultural Systems ◽  
Coping Capacity ◽  
Climate Conditions ◽  
Hazard Exposure ◽  
Social Ecological ◽  
The Impact

Abstract. Droughts continue to affect ecosystems, communities, and entire economies. Agriculture bears much of the impact, and in many countries it is the most heavily affected sector. Over the past decades, efforts have been made to assess drought risk at different spatial scales. Here, we present for the first time an integrated assessment of drought risk for both irrigated and rain-fed agricultural systems at the global scale. Composite hazard indicators were calculated for irrigated and rain-fed systems separately using different drought indices based on historical climate conditions (1980–2016). Exposure was analyzed for irrigated and non-irrigated crops. Vulnerability was assessed through a social-ecological systems perspective, using social-ecological susceptibility and lack of coping capacity indicators that were weighted by drought experts from around the world. The analysis shows that drought risk of rain-fed and irrigated agricultural systems displays heterogeneous pattern at the global level with higher risk for southeastern Europe, as well as northern and southern Africa. By providing information on the drivers and spatial patterns of drought risk in all dimensions of hazard, exposure, and vulnerability, the presented analysis can support the identification of tailored measures to reduce drought risk and increase the resilience of agricultural systems.

Sign in / Sign up

Export Citation Format

Share Document