scholarly journals Modelling above-ground carbon dynamics using multi-temporal airborne lidar: insights from a Mediterranean woodland

2016 ◽  
Vol 13 (4) ◽  
pp. 961-973 ◽  
Author(s):  
W. Simonson ◽  
P. Ruiz-Benito ◽  
F. Valladares ◽  
D. Coomes
Keyword(s):  
Climate Change ◽  
Large Scale ◽  
Critical Role ◽  
Carbon Fluxes ◽  
Carbon Dynamics ◽  
Airborne Lidar ◽  
Lidar Data ◽  
Low Carbon ◽  
Data Set ◽  
Multi Temporal

Abstract. Woodlands represent highly significant carbon sinks globally, though could lose this function under future climatic change. Effective large-scale monitoring of these woodlands has a critical role to play in mitigating for, and adapting to, climate change. Mediterranean woodlands have low carbon densities, but represent important global carbon stocks due to their extensiveness and are particularly vulnerable because the region is predicted to become much hotter and drier over the coming century. Airborne lidar is already recognized as an excellent approach for high-fidelity carbon mapping, but few studies have used multi-temporal lidar surveys to measure carbon fluxes in forests and none have worked with Mediterranean woodlands. We use a multi-temporal (5-year interval) airborne lidar data set for a region of central Spain to estimate above-ground biomass (AGB) and carbon dynamics in typical mixed broadleaved and/or coniferous Mediterranean woodlands. Field calibration of the lidar data enabled the generation of grid-based maps of AGB for 2006 and 2011, and the resulting AGB change was estimated. There was a close agreement between the lidar-based AGB growth estimate (1.22 Mg ha−1 yr−1) and those derived from two independent sources: the Spanish National Forest Inventory, and a tree-ring based analysis (1.19 and 1.13 Mg ha−1 yr−1, respectively). We parameterised a simple simulator of forest dynamics using the lidar carbon flux measurements, and used it to explore four scenarios of fire occurrence. Under undisturbed conditions (no fire) an accelerating accumulation of biomass and carbon is evident over the next 100 years with an average carbon sequestration rate of 1.95 Mg C ha−1 yr−1. This rate reduces by almost a third when fire probability is increased to 0.01 (fire return rate of 100 years), as has been predicted under climate change. Our work shows the power of multi-temporal lidar surveying to map woodland carbon fluxes and provide parameters for carbon dynamics models. Space deployment of lidar instruments in the near future could open the way for rolling out wide-scale forest carbon stock monitoring to inform management and governance responses to future environmental change.

scholarly journals Modelling above-ground carbon dynamics using multi-temporal airborne lidar: insights from a Mediterranean woodland

2015 ◽  
Vol 12 (17) ◽  
pp. 14739-14772 ◽  
Author(s):  
W. Simonson ◽  
P. Ruiz-Benito ◽  
F. Valladares ◽  
D. Coomes
Keyword(s):  
Climate Change ◽  
Large Scale ◽  
Critical Role ◽  
Carbon Fluxes ◽  
Carbon Dynamics ◽  
National Forest Inventory ◽  
Airborne Lidar ◽  
Fire Occurrence ◽  
Low Carbon ◽  
Multi Temporal

Abstract. Woodlands represent highly significant carbon sinks globally, though could lose this function under future climatic change. Effective large-scale monitoring of these woodlands has a critical role to play in mitigating for, and adapting to, climate change. Mediterranean woodlands have low carbon densities, but represent important global carbon stocks due to their extensiveness and are particularly vulnerable because the region is predicted to become much hotter and drier over the coming century. Airborne lidar is already recognized as an excellent approach for high-fidelity carbon mapping, but few studies have used multi-temporal lidar surveys to measure carbon fluxes in forests and none have worked with Mediterranean woodlands. We use a multi-temporal (five year interval) airborne lidar dataset for a region of central Spain to estimate above-ground biomass (AGB) and carbon dynamics in typical mixed broadleaved/coniferous Mediterranean woodlands. Field calibration of the lidar data enabled the generation of grid-based maps of AGB for 2006 and 2011, and the resulting AGB change were estimated. There was a close agreement between the lidar-based AGB growth estimate (1.22 Mg ha−1 year−1) and those derived from two independent sources: the Spanish National Forest Inventory, and a~tree-ring based analysis (1.19 and 1.13 Mg ha−1 year−1, respectively). We parameterised a simple simulator of forest dynamics using the lidar carbon flux measurements, and used it to explore four scenarios of fire occurrence. Under undisturbed conditions (no fire occurrence) an accelerating accumulation of biomass and carbon is evident over the next 100 years with an average carbon sequestration rate of 1.95 Mg C ha−1 year−1. This rate reduces by almost a third when fire probability is increased to 0.01, as has been predicted under climate change. Our work shows the power of multi-temporal lidar surveying to map woodland carbon fluxes and provide parameters for carbon dynamics models. Space deployment of lidar instruments in the near future could open the way for rolling out wide-scale forest carbon stock monitoring to inform management and governance responses to future environmental change.

Configurations to Superior Environmental Innovation Strategy: A Both–And Approach

2021 ◽  
pp. 108602662110316
Author(s):  
Tiziana Russo-Spena ◽  
Nadia Di Paola ◽  
Aidan O’Driscoll
Keyword(s):  
Climate Change ◽  
Value Chain ◽  
Critical Role ◽  
Well Being ◽  
Point Of View ◽  
Future Generations ◽  
Innovation Strategy ◽  
Environmental Innovation ◽  
Data Set

An effective climate change action involves the critical role that companies must play in assuring the long-term human and social well-being of future generations. In our study, we offer a more holistic, inclusive, both–and approach to the challenge of environmental innovation (EI) that uses a novel methodology to identify relevant configurations for firms engaging in a superior EI strategy. A conceptual framework is proposed that identifies six sets of driving characteristics of EI and two sets of beneficial outcomes, all inherently tensional. Our analysis utilizes a complementary rather than an oppositional point of view. A data set of 65 companies in the ICT value chain is analyzed via fuzzy-set comparative analysis (fsQCA) and a post-QCA procedure. The results reveal that achieving a superior EI strategy is possible in several scenarios. Specifically, after close examination, two main configuration groups emerge, referred to as technological environmental innovators and organizational environmental innovators.

The use of Otsu algorithm and multi-temporal airborne LiDAR data to detect building changes in urban space

2021 ◽  
Author(s):  
Renato César dos Santos ◽  
Mauricio Galo ◽  
André Caceres Carrilho ◽  
Guilherme Gomes Pessoa
Keyword(s):  
Urban Space ◽  
Airborne Lidar ◽  
Lidar Data ◽  
Multi Temporal ◽  
Airborne Lidar Data

scholarly journals AUTOMATIC BUILDING CHANGE DETECTION USING MULTI-TEMPORAL AIRBORNE LIDAR DATA

2020 ◽  
Vol XLII-3/W12-2020 ◽  
pp. 19-24
Author(s):  
R. C. dos Santos ◽  
M. Galo ◽  
A. C. Carrilho ◽  
G. G. Pessoa ◽  
R. A. R. de Oliveira
Keyword(s):  
Change Detection ◽  
Average Density ◽  
Airborne Lidar ◽  
Lidar Data ◽  
Qualitative And Quantitative ◽  
Multi Temporal ◽  
Quantitative Analyses ◽  
3D Information ◽  
Airborne Lidar Data ◽  
Area Monitoring

Abstract. The automatic detection of building changes is an essential process for urban area monitoring, urban planning, and database update. In this context, 3D information derived from multi-temporal airborne LiDAR scanning is one effective alternative. Despite several works in the literature, the separation of change areas in building and non-building remains a challenge. In this sense, it is proposed a new method for building change detection, having as the main contribution the use of height entropy concept to identify the building change areas. The experiments were performed considering multi-temporal airborne LiDAR data from 2012 and 2014, both with average density around 5 points/m2. Qualitative and quantitative analyses indicate that the proposed method is robust in building change detection, having the potential to identify small changes (larger than 20 m2). In general, the change detection method presented average completeness and correctness around 97% and 71%, respectively.

scholarly journals Climate change impact on streamflow in large-scale river basins: projections and their uncertainties sourced from GCMs and RCP scenarios

2018 ◽  
Vol 379 ◽  
pp. 139-144 ◽  
Author(s):  
Olga N. Nasonova ◽  
Yeugeniy M. Gusev ◽  
Evgeny E. Kovalev ◽  
Georgy V. Ayzel
Keyword(s):  
Climate Change ◽  
River Runoff ◽  
Climate Change Impact ◽  
Large Scale ◽  
River Basins ◽  
Surface Model ◽  
Second Phase ◽  
Rcp Scenarios ◽  
Data Set ◽  
Change Impact

Abstract. Climate change impact on river runoff was investigated within the framework of the second phase of the Inter-Sectoral Impact Model Intercomparison Project (ISI-MIP2) using a physically-based land surface model Soil Water – Atmosphere – Plants (SWAP) (developed in the Institute of Water Problems of the Russian Academy of Sciences) and meteorological projections (for 2006–2099) simulated by five General Circulation Models (GCMs) (including GFDL-ESM2M, HadGEM2-ES, IPSL-CM5A-LR, MIROC-ESM-CHEM, and NorESM1-M) for each of four Representative Concentration Pathway (RCP) scenarios (RCP2.6, RCP4.5, RCP6.0, and RCP8.5). Eleven large-scale river basins were used in this study. First of all, SWAP was calibrated and validated against monthly values of measured river runoff with making use of forcing data from the WATCH data set and all GCMs' projections were bias-corrected to the WATCH. Then, for each basin, 20 projections of possible changes in river runoff during the 21st century were simulated by SWAP. Analysis of the obtained hydrological projections allowed us to estimate their uncertainties resulted from application of different GCMs and RCP scenarios. On the average, the contribution of different GCMs to the uncertainty of the projected river runoff is nearly twice larger than the contribution of RCP scenarios. At the same time the contribution of GCMs slightly decreases with time.

4D Monitoring of Active Landslides by Multi-Temporal Airborne LiDAR Data

2013 ◽  
pp. 147-151
Author(s):  
Guido Ventura ◽  
Giuseppe Vilardo ◽  
Carlo Terranova ◽  
Eliana Bellucci Sessa
Keyword(s):  
Airborne Lidar ◽  
Lidar Data ◽  
Multi Temporal ◽  
Airborne Lidar Data

Transitioning to Low Carbon Mobility

2016 ◽  
Author(s):  
Debbie Hopkins ◽  
James Higham
Keyword(s):  
Climate Change ◽  
Global Climate ◽  
Critical Role ◽  
Ghg Emissions ◽  
Substantial Contribution ◽  
Transport Sector ◽  
Low Carbon ◽  
The World ◽  
Environmental Transformation ◽  
Context Specific

Since the turn of the 21st Century, the world has experienced unprecedented economic, political, social and environmental transformation. The ‘inconvenient truth’ of climate change is now undeniable; rising temperatures and the increasing frequency and intensity of extreme events have resulted in the loss of lives, livelihoods and habitats as well as straining economies. Increasingly mobile lives are often dependent on high carbon modes of transport, representing a substantial contribution to global greenhouse gas (GHG) emissions, the underlying cause of anthropogenic climate change. With growing demand and rising emissions, the transport sector has a critical role to play in achieving GHG emissions reductions, and stabilising the global climate. Low Carbon Mobility Transitions draws interdisciplinary insights on transport and mobilities, as a vast and complex socio-technical system. It presents 15 chapters and 6 shorter ‘case studies’ covering a diversity of themes and geographic contexts across three thematic sections: People and Place, Structures in Transition, and Innovations for Low Carbon Mobility. The three sections are highly interrelated, and with overlapping, complementing, and challenging themes. The contributions offer critical, often neglected insights into low carbon mobility transitions across the world. In doing so, Low Carbon Mobility Transitions sheds light on the place- and context-specific nature of mobility in a climate constrained world.

scholarly journals Monitoring tropical forest carbon stocks and emissions using Planet satellite data

2019 ◽  
Vol 9 (1) ◽  
Author(s):  
Ovidiu Csillik ◽  
Pramukta Kumar ◽  
Joseph Mascaro ◽  
Tara O’Shea ◽  
Gregory P. Asner
Keyword(s):  
Climate Change ◽  
Large Scale ◽  
Cost Effective ◽  
Carbon Stocks ◽  
Airborne Lidar ◽  
Aboveground Carbon ◽  
Lidar Measurements ◽  
High Resolution Map ◽  
Aboveground Carbon Density ◽  
Planet Satellite

AbstractTropical forests are crucial for mitigating climate change, but many forests continue to be driven from carbon sinks to sources through human activities. To support more sustainable forest uses, we need to measure and monitor carbon stocks and emissions at high spatial and temporal resolution. We developed the first large-scale very high-resolution map of aboveground carbon stocks and emissions for the country of Peru by combining 6.7 million hectares of airborne LiDAR measurements of top-of-canopy height with thousands of Planet Dove satellite images into a random forest machine learning regression workflow, obtaining an R2 of 0.70 and RMSE of 25.38 Mg C ha−1 for the nationwide estimation of aboveground carbon density (ACD). The diverse ecosystems of Peru harbor 6.928 Pg C, of which only 2.9 Pg C are found in protected areas or their buffers. We found significant carbon emissions between 2012 and 2017 in areas aggressively affected by oil palm and cacao plantations, agricultural and urban expansions or illegal gold mining. Creating such a cost-effective and spatially explicit indicators of aboveground carbon stocks and emissions for tropical countries will serve as a transformative tool to quantify the climate change mitigation services that forests provide.

scholarly journals Climate-driven enrichment of pollutants in peatlands

2007 ◽  
Vol 4 (5) ◽  
pp. 905-911 ◽  
Author(s):  
A. Martínez Cortizas ◽  
H. Biester ◽  
T. Mighall ◽  
R. Bindler
Keyword(s):  
Climate Change ◽  
Critical Role ◽  
Carbon Dynamics ◽  
Aquatic Systems ◽  
Element Concentrations ◽  
Present Trend ◽  
Carbon Release ◽  
Northern Peatlands ◽  
Global Carbon ◽  
Multiproxy Approach

Abstract. Peatlands play an important role for global carbon dynamics, acting as a sink or source depending on climate. Such changes imply a series of additional effects because peatlands are also an important reservoir of atmospherically derived pollutants. Using a multiproxy approach (non-pollen-palynomorphs, δ15N, C/N, Se, Br, I, Hg, Ti), we show a relationship between climate (wetter–drier) and peat decomposition, which affected element concentrations in a Spanish bog during the last 5500 years. Changes in superficial wetness played a critical role in the cycling of elements coupled to carbon dynamics. Dry phases caused increased peat mineralisation, resulting in a 2–3 times increase in concentrations of the analysed elements independent from atmospheric fluxes. Under the present trend of climate change large areas of northern peatlands are expected to be severely affected; in this context our findings indicate that the increase in carbon release, which leads to an enrichment of elements, may enhance the export of stored contaminants (Hg, organohalogens) to the aquatic systems or to the atmosphere.

scholarly journals Super-Resolution-Based Snake Model—An Unsupervised Method for Large-Scale Building Extraction Using Airborne LiDAR Data and Optical Image

2020 ◽  
Vol 12 (11) ◽  
pp. 1702 ◽  
Author(s):  
Thanh Huy Nguyen ◽  
Sylvie Daniel ◽  
Didier Guériot ◽  
Christophe Sintès ◽  
Jean-Marc Le Caillec
Keyword(s):  
Large Scale ◽  
Active Contour Model ◽  
Super Resolution ◽  
Airborne Lidar ◽  
Lidar Data ◽  
Force Model ◽  
Building Extraction ◽  
Snake Model ◽  
Object Based

Automatic extraction of buildings in urban and residential scenes has become a subject of growing interest in the domain of photogrammetry and remote sensing, particularly since the mid-1990s. Active contour model, colloquially known as snake model, has been studied to extract buildings from aerial and satellite imagery. However, this task is still very challenging due to the complexity of building size, shape, and its surrounding environment. This complexity leads to a major obstacle for carrying out a reliable large-scale building extraction, since the involved prior information and assumptions on building such as shape, size, and color cannot be generalized over large areas. This paper presents an efficient snake model to overcome such a challenge, called Super-Resolution-based Snake Model (SRSM). The SRSM operates on high-resolution Light Detection and Ranging (LiDAR)-based elevation images—called z-images—generated by a super-resolution process applied to LiDAR data. The involved balloon force model is also improved to shrink or inflate adaptively, instead of inflating continuously. This method is applicable for a large scale such as city scale and even larger, while having a high level of automation and not requiring any prior knowledge nor training data from the urban scenes (hence unsupervised). It achieves high overall accuracy when tested on various datasets. For instance, the proposed SRSM yields an average area-based Quality of 86.57% and object-based Quality of 81.60% on the ISPRS Vaihingen benchmark datasets. Compared to other methods using this benchmark dataset, this level of accuracy is highly desirable even for a supervised method. Similarly desirable outcomes are obtained when carrying out the proposed SRSM on the whole City of Quebec (total area of 656 km2), yielding an area-based Quality of 62.37% and an object-based Quality of 63.21%.

Sign in / Sign up

Export Citation Format

Share Document