scholarly journals Simulating carbon exchange using a regional atmospheric model coupled to an advanced land-surface model

2010 ◽  
Vol 7 (8) ◽  
pp. 2397-2417 ◽  
Author(s):  
H. W. Ter Maat ◽  
R. W. A. Hutjes ◽  
F. Miglietta ◽  
B. Gioli ◽  
F. C. Bosveld ◽  
...  
Keyword(s):  
Carbon Dioxide ◽  
Land Surface ◽  
Land Surface Model ◽  
Atmospheric Model ◽  
Surface Fluxes ◽  
Heat Fluxes ◽  
Shortwave Radiation ◽  
Surface Model ◽  
Large Variability ◽  
Regional Atmospheric Modelling System

Abstract. This paper is a case study to investigate what the main controlling factors are that determine atmospheric carbon dioxide content for a region in the centre of The Netherlands. We use the Regional Atmospheric Modelling System (RAMS), coupled with a land surface scheme simulating carbon, heat and momentum fluxes (SWAPS-C), and including also submodels for urban and marine fluxes, which in principle should include the dominant mechanisms and should be able to capture the relevant dynamics of the system. To validate the model, observations are used that were taken during an intensive observational campaign in central Netherlands in summer 2002. These include flux-tower observations and aircraft observations of vertical profiles and spatial fluxes of various variables. The simulations performed with the coupled regional model (RAMS-SWAPS-C) are in good qualitative agreement with the observations. The station validation of the model demonstrates that the incoming shortwave radiation and surface fluxes of water and CO2 are well simulated. The comparison against aircraft data shows that the regional meteorology (i.e. wind, temperature) is captured well by the model. Comparing spatially explicitly simulated fluxes with aircraft observed fluxes we conclude that in general latent heat fluxes are underestimated by the model compared to the observations but that the latter exhibit large variability within all flights. Sensitivity experiments demonstrate the relevance of the urban emissions of carbon dioxide for the carbon balance in this particular region. The same tests also show the relation between uncertainties in surface fluxes and those in atmospheric concentrations.

scholarly journals Simulating carbon exchange using a regional atmospheric model coupled to an advanced land-surface model

2008 ◽  
Vol 5 (5) ◽  
pp. 4161-4207 ◽  
Author(s):  
H. W. Ter Maat ◽  
R. W. A. Hutjes
Keyword(s):  
Carbon Dioxide ◽  
Land Surface ◽  
Large Scale ◽  
Regional Scale ◽  
Atmospheric Model ◽  
Surface Fluxes ◽  
Heat Fluxes ◽  
Surface Model ◽  
Carbon Exchange ◽  
Regional Atmospheric Modelling System

Abstract. A large scale mismatch exists between our understanding and quantification of ecosystem atmosphere exchange of carbon dioxide at local scale and continental scales. This paper will focus on the carbon exchange on the regional scale to address the following question: What are the main controlling factors determining atmospheric carbon dioxide content at a regional scale? We use the Regional Atmospheric Modelling System (RAMS), coupled with a land surface scheme simulating carbon, heat and momentum fluxes (SWAPS-C), and including also sub models for urban and marine fluxes, which in principle include the main controlling mechanisms and capture the relevant dynamics of the system. To validate the model, observations are used which were taken during an intensive observational campaign in the central Netherlands in summer 2002. These included flux-site observations, vertical profiles at tall towers and spatial fluxes of various variables taken by aircraft. The coupled regional model (RAMS-SWAPS-C) generally does a good job in simulating results close to reality. The validation of the model demonstrates that surface fluxes of heat, water and CO2 are reasonably well simulated. The comparison against aircraft data shows that the regional meteorology is captured by the model. Comparing spatially explicit simulated and observed fluxes we conclude that in general simulated latent heat fluxes are underestimated by the model to the observations which exhibit large standard deviation for all flights. Sensitivity experiments demonstrated the relevance of the urban emissions of carbon dioxide for the carbon balance in this particular region. The same test also show the relation between uncertainties in surface fluxes and those in atmospheric concentrations.

scholarly journals Coupling the high complexity land surface model ACASA to the mesoscale model WRF

2014 ◽  
Vol 7 (3) ◽  
pp. 2829-2875 ◽  
Author(s):  
L. Xu ◽  
R. D. Pyles ◽  
K. T. Paw U ◽  
S. H. Chen ◽  
E. Monier
Keyword(s):  
Carbon Dioxide ◽  
Land Surface ◽  
Mesoscale Model ◽  
Land Surface Model ◽  
Carbon Dioxide Concentration ◽  
Atmospheric Model ◽  
Dew Point ◽  
Surface Model ◽  
High Complexity ◽  
Surface Conditions

Abstract. In this study, the Weather Research and Forecasting Model (WRF) is coupled with the Advanced Canopy–Atmosphere–Soil Algorithm (ACASA), a high complexity land surface model. Although WRF is a state-of-the-art regional atmospheric model with high spatial and temporal resolutions, the land surface schemes available in WRF are simple and lack the capability to simulate carbon dioxide, for example, the popular NOAH LSM. ACASA is a complex multilayer land surface model with interactive canopy physiology and full surface hydrological processes. It allows microenvironmental variables such as air and surface temperatures, wind speed, humidity, and carbon dioxide concentration to vary vertically. Simulations of surface conditions such as air temperature, dew point temperature, and relative humidity from WRF–ACASA and WRF–NOAH are compared with surface observation from over 700 meteorological stations in California. Results show that the increase in complexity in the WRF–ACASA model not only maintains model accuracy, it also properly accounts for the dominant biological and physical processes describing ecosystem-atmosphere interactions that are scientifically valuable. The different complexities of physical and physiological processes in the WRF–ACASA and WRF–NOAH models also highlight the impacts of different land surface and model components on atmospheric and surface conditions.

scholarly journals How Does the Choice of the Lower Boundary Conditions in Large-Eddy Simulations Affect the Development of Dispersive Fluxes Near the Surface?

2021 ◽  
Author(s):  
Luise Wanner ◽  
Frederik De Roo ◽  
Matthias Sühring ◽  
Matthias Mauder
Keyword(s):  
Energy Balance ◽  
Land Surface ◽  
Lower Boundary ◽  
Land Surface Model ◽  
Surface Fluxes ◽  
Heat Fluxes ◽  
Surface Model ◽  
Large Eddy ◽  
Dispersive Fluxes ◽  
Eddy Covariance Measurement

AbstractLarge-eddy simulations (LES) are an important tool for investigating the longstanding energy-balance-closure problem, as they provide continuous, spatially-distributed information about turbulent flow at a high temporal resolution. Former LES studies reproduced an energy-balance gap similar to the observations in the field typically amounting to 10–30% for heights on the order of 100 m in convective boundary layers even above homogeneous surfaces. The underestimation is caused by dispersive fluxes associated with large-scale turbulent organized structures that are not captured by single-tower measurements. However, the gap typically vanishes near the surface, i.e. at typical eddy-covariance measurement heights below 20 m, contrary to the findings from field measurements. In this study, we aim to find a LES set-up that can represent the correct magnitude of the energy-balance gap close to the surface. Therefore, we use a nested two-way coupled LES, with a fine grid that allows us to resolve fluxes and atmospheric structures at typical eddy-covariance measurement heights of 20 m. Under different stability regimes we compare three different options for lower boundary conditions featuring grassland and forest surfaces, i.e. (1) prescribed surface fluxes, (2) a land-surface model, and (3) a land-surface model in combination with a resolved canopy. We show that the use of prescribed surface fluxes and a land-surface model yields similar dispersive heat fluxes that are very small near the vegetation top for both grassland and forest surfaces. However, with the resolved forest canopy, dispersive heat fluxes are clearly larger, which we explain by a clear impact of the resolved canopy on the relationship between variance and flux–variance similarity functions.

ECLand: an ECMWF land surface modelling platform

2021 ◽  
Author(s):  
Gianpaolo Balsamo ◽  
Souhail Boussetta
Keyword(s):  
Land Surface ◽  
Urban Areas ◽  
Land Surface Model ◽  
Open Water ◽  
Surface Fluxes ◽  
Surface Model ◽  
New Developments ◽  
Surface Modelling ◽  
Land Surface Modelling ◽  
New Research

<p>The ECMWF operational land surface model, based on the Carbon-Hydrology Tiled ECMWF Scheme for Surface Exchanges over Land (CHTESSEL) is the baseline for global weather, climate and environmental applications at ECMWF. In order to expedite its progress and benefit from international collaboration, an ECLand platform has been designed to host advanced and modular schemes. ECLand is paving the way toward a land model that could support a wider range of modelling applications, facilitating global kilometer scales testing as envisaged in the Copernicus and Destination Earth programmes. This presentation introduces the CHTESSEL and its recent new developments that aims at hosting new research applications.</p><p>These new improvements touch upon different components of the model: (i) vegetation, (ii) snow, (iii) soil hydrology, (iv) open water/lakes (v) rivers and (vi) urban areas. The developments are evaluated separately with either offline simulations or coupled experiments, depending on their level of operational readiness, illustrating the benchmarking criteria for assessing process fidelity with regards to land surface fluxes and reservoirs involved in water-energy-carbon exchange, and within the Earth system prediction framework, as foreseen to enter upcoming ECMWF operational cycles.</p><p>Reference: Souhail Boussetta, Gianpaolo Balsamo*, Anna Agustì-Panareda, Gabriele Arduini, Anton Beljaars, Emanuel Dutra, Glenn Carver, Margarita Choulga, Ioan Hadade, Cinzia Mazzetti, Joaquìn Munõz-Sabater, Joe McNorton, Christel Prudhomme, Patricia De Rosnay, Irina Sandu, Nils Wedi, Dai Yamazaki, Ervin Zsoter, 2021: ECLand: an ECMWF land surface modelling platform, MDPI Atmosphere, (in prep).</p>

scholarly journals Evaluating terrestrial CO<sub>2</sub> flux diagnoses and uncertainties from a simple land surface model and its residuals

2014 ◽  
Vol 11 (2) ◽  
pp. 217-235 ◽  
Author(s):  
T. W. Hilton ◽  
K. J. Davis ◽  
K. Keller
Keyword(s):  
Carbon Dioxide ◽  
Parameter Estimation ◽  
North American ◽  
Land Surface ◽  
Atmospheric Carbon Dioxide ◽  
Ecosystem Respiration ◽  
Land Surface Model ◽  
Net Ecosystem Exchange ◽  
Surface Model ◽  
Considerable Uncertainty

Abstract. Global terrestrial atmosphere–ecosystem carbon dioxide fluxes are well constrained by the concentration and isotopic composition of atmospheric carbon dioxide. In contrast, considerable uncertainty persists surrounding regional contributions to the net global flux as well as the impacts of atmospheric and biological processes that drive the net flux. These uncertainties severely limit our ability to make confident predictions of future terrestrial biological carbon fluxes. Here we use a simple light-use efficiency land surface model (the Vegetation Photosynthesis Respiration Model, VPRM) driven by remotely sensed temperature, moisture, and phenology to diagnose North American gross ecosystem exchange (GEE), ecosystem respiration, and net ecosystem exchange (NEE) for the period 2001 to 2006. We optimize VPRM parameters to eddy covariance (EC) NEE observations from 65 North American FluxNet sites. We use a separate set of 27 cross-validation FluxNet sites to evaluate a range of spatial and temporal resolutions for parameter estimation. With these results we demonstrate that different spatial and temporal groupings of EC sites for parameter estimation achieve similar sum of squared residuals values through radically different spatial patterns of NEE. We also derive a regression model to estimate observed VPRM errors as a function of VPRM NEE, temperature, and precipitation. Because this estimate is based on model-observation residuals it is comprehensive of all the error sources present in modeled fluxes. We find that 1 km interannual variability in VPRM NEE is of similar magnitude to estimated 1 km VPRM NEE errors.

scholarly journals Improved representations of coupled soil-canopy processes in the CABLE land surface model

2016 ◽  
Author(s):  
Vanessa Haverd ◽  
Matthias Cuntz ◽  
Lars P. Nieradzik ◽  
Ian N. Harman
Keyword(s):  
Water Use ◽  
Land Surface ◽  
Land Surface Model ◽  
Heat Fluxes ◽  
Soil Conditions ◽  
Surface Model ◽  
Drought Response ◽  
Deep Soil ◽  
Stable Conditions ◽  
Water Use Efficiencies

Abstract. CABLE is a global land surface model, which has been used extensively in offline and coupled simulations. While CABLE performs well in comparison with other land surface models, results are impacted by decoupling of transpiration and photosynthesis fluxes under drying soil conditions, often leading to implausibly high water use efficiencies. Here we present a solution to this problem, ensuring that modeled transpiration is always consistent with modeled photosynthesis, while introducing a parsimonious single-parameter drought response function which is coupled to root water uptake. We further improve CABLE’s simulation of coupled soil-canopy processes by introducing an alternative hydrology model with a physically accurate representation of coupled energy and water fluxes at the soil/air interface, including a more realistic formulation of transfer under atmospherically stable conditions within the canopy and in the presence of leaf litter. The effects of these model developments are assessed using data from 18 stations from the global Eddy covariance flux network FLUXNET, selected to span a large climatic range. Marked improvements are demonstrated, with root-mean-squared errors for monthly latent heat fluxes and water use efficiencies being reduced by 40 %. Results highlight the important roles of deep soil moisture in mediating drought response and litter in dampening soil evaporation.

scholarly journals Simulation of semi-arid biomass plantations and irrigation using the WRF-NOAH model – a comparison with observations from Israel

2014 ◽  
Vol 18 (5) ◽  
pp. 1761-1783 ◽  
Author(s):  
O. Branch ◽  
K. Warrach-Sagi ◽  
V. Wulfmeyer ◽  
S. Cohen
Keyword(s):  
Land Surface ◽  
High Surface ◽  
Land Surface Model ◽  
Vapour Pressure Deficit ◽  
Soil Heat Flux ◽  
Heat Fluxes ◽  
Surface Radiation ◽  
Surface Model ◽  
Maximum Deviation ◽  
Soil Temperatures

Abstract. A 10 × 10 km irrigated biomass plantation was simulated in an arid region of Israel to simulate diurnal energy balances during the summer of 2012 (JJA). The goal is to examine daytime horizontal flux gradients between plantation and desert. Simulations were carried out within the coupled WRF-NOAH atmosphere/land surface model. MODIS land surface data was adjusted by prescribing tailored land surface and soil/plant parameters, and by adding a controllable sub-surface irrigation scheme to NOAH. Two model cases studies were compared – Impact and Control. Impact simulates the irrigated plantation. Control simulates the existing land surface, where the predominant land surface is bare desert soil. Central to the study is parameter validation against land surface observations from a desert site and from a 400 ha Simmondsia chinensis (jojoba) plantation. Control was validated with desert observations, and Impact with Jojoba observations. Model evapotranspiration was validated with two Penman–Monteith estimates based on the observations. Control simulates daytime desert conditions with a maximum deviation for surface 2 m air temperatures (T2) of 0.2 °C, vapour pressure deficit (VPD) of 0.25 hPa, wind speed (U) of 0.5 m s−1, surface radiation (Rn) of 25 W m−2, soil heat flux (G) of 30 W m−2 and 5 cm soil temperatures (ST5) of 1.5 °C. Impact simulates irrigated vegetation conditions with a maximum deviation for T2 of 1–1.5 °C, VPD of 0.5 hPa, U of 0.5 m s−1, Rn of 50 W m−5, G of 40 W m−2 and ST5 of 2 °C. Latent heat curves in Impact correspond closely with Penman–Monteith estimates, and magnitudes of 160 W m−2 over the plantation are usual. Sensible heat fluxes, are around 450 W m−2 and are at least 100–110 W m−2 higher than the surrounding desert. This surplus is driven by reduced albedo and high surface resistance, and demonstrates that high evaporation rates may not occur over Jojoba if irrigation is optimized. Furthermore, increased daytime T2 over plantations highlight the need for hourly as well as daily mean statistics. Daily mean statistics alone may imply an overall cooling effect due to surplus nocturnal cooling, when in fact a daytime warming effect is observed.

scholarly journals Evaluating a land surface model at a water-limited site: implications for land surface contributions to droughts and heatwaves

2021 ◽  
Author(s):  
Mengyuan Mu ◽  
Martin De Kauwe ◽  
Anna Ukkola ◽  
Andy Pitman ◽  
Teresa Gimeno ◽  
...  
Keyword(s):  
Soil Moisture ◽  
Land Surface ◽  
Land Surface Model ◽  
Heat Fluxes ◽  
Surface Model ◽  
Strong Impact ◽  
Water Fluxes ◽  
Land Surface Models ◽  
Groundwater Aquifer ◽  
Surface Models

&lt;p&gt;Land surface models underpin coupled climate model projections of droughts and heatwaves. However, the lack of simultaneous observations of individual components of evapotranspiration, concurrent with root-zone soil moisture, has limited previous model evaluations. Here, we use a comprehensive set of observations from a water-limited site in southeastern Australia including both evapotranspiration and soil moisture to a depth of 4.5 m to evaluate the Community Atmosphere-Biosphere Land Exchange (CABLE) land surface model. We demonstrate that alternative process representations within CABLE had the capacity to improve simulated evapotranspiration, but not necessarily soil moisture dynamics - highlighting problems of model evaluations against water fluxes alone. Our best simulation was achieved by resolving a soil evaporation bias; a more realistic initialisation of the groundwater aquifer state; higher vertical soil resolution informed by observed soil properties; and further calibrating soil hydraulic conductivity. Despite these improvements, the role of the empirical soil moisture stress function in influencing the simulated water fluxes remained important: using a site calibrated function reduced the soil water stress on plants by 36 % during drought and 23 % at other times. These changes in CABLE not only improve the seasonal cycle of evapotranspiration, but also affect the latent and sensible heat fluxes during droughts and heatwaves. The range of parameterisations tested led to differences of ~150 W m&lt;sup&gt;-2&lt;/sup&gt; in the simulated latent heat flux during a heatwave, implying a strong impact of parameterisations on the capacity for evaporative cooling and feedbacks to the boundary layer (when coupled). Overall, our results highlight the opportunity to advance the capability of land surface models to capture water cycle processes, particularly during meteorological extremes, when sufficient observations of both evapotranspiration fluxes and soil moisture profiles are available.&lt;/p&gt;

Sensitivity of Latent Heat Fluxes to Initial Values and Parameters of a Land-Surface Model

2010 ◽  
Vol 9 (4) ◽  
pp. 984-1001 ◽  
Author(s):  
Jörg Schwinger ◽  
Stefan J. Kollet ◽  
Charlotte M. Hoppe ◽  
Hendrik Elbern
Keyword(s):  
Latent Heat ◽  
Land Surface ◽  
Land Surface Model ◽  
Heat Fluxes ◽  
Surface Model ◽  
Initial Values
Sign in / Sign up

Export Citation Format

Share Document