Seismic Imaging, Arc Magamtism and Megathrust Earthquake under the Western Pacific Subduction Zone

Author(s):  
Zhi Wang ◽  
Jian Wang

<p>Arc magmatism and megathrust earthquake occurrence in a subduction zone are deemed to attribute to many factors, including structural heterogeneities, fluid contents, temperature, depth of subducting oceanic crust, and etc. However, how these factors affect them is unclear. The extensive arc magmatism observed on the island arcs is considered to be an indicator on chemical exchange between the wedge mantle and the surface in a subduction zone. Megathrust earthquake frequently occurrence is also considered to be attributed to the slab melting and associated interplate coupling of the subducting plate. The Western Pacific subduction zone is regarded as one of the best Laboratory for seismologists to examine these processes due to the densest seismic networks recording numerous earthquakes. Some of the previous studies suggest that the island-arc magmatism is mainly contributed to the melting of peridotite in the mantle wedge due to fluids intrusion from the dehydration process associated with the subducting oceanic crust. They further argued that the oceanic plate could only provide water to the overlying mantle wedge for arc magmatism, but not melt itself due to that it is too cold to melt at a depth between 100 and 200km. However, some of other studies revealed that the hydrated basalt derived from the mid-ocean ridge will be melted with high T and water saturated on the upper interface of the sbuducting plate in the mantle wedge. We consider that the three-dimensional (3-D) P- and S- wave velocity (Vp, Vs) and Poisson’s ratio (σ) structures of the subduction zone, synthesized from a large-quantity of high-quality direct P-, and S-wave arrival times of source-recive pairs from the well located suboceanic events with sP depth phase data could provide a compelling evidence for structural heterogeneity, highly hydrated and serpentinized forearc mantle and dehydrated fluids in the subduction zones. In this study, we combined seismic velocities and Poisson’s ratio images under the entire-arc region of the Western Pacific subduction zone to reveal their effects on megathrust earthquake generation and arc magmatism. We find that a ~10 km-thick low-velocity layer with high-V and high-Poisson’s ratio anomalies is clearly imaged along the upper interface of the subducting Pacific slab. This distinct layer implies partial melting of the oceanic crust due to the deep-seated metamorophic reactions depending on the source of fluids and temperature regime. Such a process could refertilize the overlying mantle wedge and enrich the peridotite sources of basalts under the island arc. Significant low-V and high-Poisson’s ratio anomalies were observed in the mantle wedge along the volcanic front, indicating melting or partial melting of peridotite-rich mantle and then yield tholeiitic magma there. The present study demonstrates that the combined factors of fluid content, mineral composition and thermal regime play a crucial role in both slab melting and arc-magmatism under the Western Pacific subduction zone.</p>

2002 ◽  
Vol 173 (3) ◽  
pp. 195-206 ◽  
Author(s):  
Erwan Bourdon ◽  
Jean-Philippe Eissen ◽  
Marc-André Gutscher ◽  
Michel Monzier ◽  
Pablo Samaniego ◽  
...  

Abstract Situated in the fore-arc of the Northern Volcanic Zone (NVZ) of the Andes in Ecuador, Pichincha volcano is an active edifice where have been erupted unusual magmas as adakites and high-Mg andesites. The particular geodynamic setting of the ecuadorian margin (i.e. the flat subduction of the Carnegie Ridge) suggests that thermo-barometric conditions for the partial melting of the oceanic crust are accomplished beneath this volcano. Pichincha adakites possess all the geochemical and isotopic characteristics of slab melts described in various other arc settings. High-Mg andesites with geochemical characteristics close to those of adakites present strong enrichments in MgO that suggest that, once they were produced by ca. 10 % partial melting of the downgoing subducted slab, some adakites en route to the surface strongly interacted with the peridotitic mantle wedge. Adakitic magmas could then represent, as in many other arcs where slab melting occurs, the principal metasomatic agent of the mantle in the NVZ in Ecuador.


Author(s):  
M. S. Drummond ◽  
M. J. Defant ◽  
P. K. Kepezhinskas

ABSTRACT:The prospect of partial melting of the subducted oceanic crust to produce arc magmatism has been debated for over 30 years. Debate has centred on the physical conditions of slab melting and the lack of a definitive, unambiguous geochemical signature and petrogenetic process. Experimental partial melting data for basalt over a wide range of pressures (1–32 kbar) and temperatures (700–1150°C) have shown that melt compositions are primarily trondhjemite–tonalite–dacite (TTD). High-Al (> 15% Al2O3 at the 70% SiO2 level) TTD melts are produced by high-pressure (≥ 5 kbar) partial melting of basalt, leaving a restite assemblage of garnet + clinopyroxene ± hornblende. A specific Cenozoic high-Al TTD (adakite) contains lower Y, Yb and Sc and higher Sr, Sr/Y, La/Yb and.Zr/Sm relative to other TTD types and is interpreted to represent a slab melt under garnet amphibolite to eclogite conditions. High-Al TTD with an adakite-like geochemical character is prevalent in the Archean as the result of a higher geotherm that facilitated slab melting. Cenozoic adakite localities are commonly associated with the subduction of young (<25 Ma), hot oceanic crust, which may provide a slab geotherm (≍9–10°C km−1) conducive for slab dehydration melting. Viable alternative or supporting tectonic effects that may enhance slab melting include highly oblique convergence and resultant high shear stresses and incipient subduction into a pristine hot mantle wedge. The minimum P–T conditions for slab melting are interpreted to be 22–26 kbar (75–85 km depth) and 750–800°C. This P–T regime is framed by the hornblende dehydration, 10°C/km, and wet basalt melting curves and coincides with numerous potential slab dehydration reactions, such as tremolite, biotite + quartz, serpentine, talc, Mg-chloritoid, paragonite, clinohumite and talc + phengite. Involvement of overthickened (>50 km) lower continental crust either via direct partial melting or as a contaminant in typical mantle wedge-derived arc magmas has been presented as an alternative to slab melting. However, the intermediate to felsic volcanic and plutonic rocks that involve the lower crust are more highly potassic, enriched in large ion lithophile elements and elevated in Sr isotopic values relative to Cenozoic adakites. Slab-derived adakites, on the other hand, ascend into and react with the mantle wedge and become progressively enriched in MgO, Cr and Ni while retaining their slab melt geochemical signature. Our studies in northern Kamchatka, Russia provide an excellent case example for adakite-mantle interaction and a rare glimpse of trapped slab melt veinlets in Na-metasomatised mantle xenoliths.


2020 ◽  
Author(s):  
Xiaoyu Guan ◽  
Yuanze Zhou ◽  
Takashi Furumura

&lt;p&gt;Fitting subduction zone guided waves with synthetics is an ideal choice for studying the velocity structure of the oceanic crust. After an earthquake occurs in subduction zones, seismic waves can be trapped in the low-velocity oceanic crust and propagated as guided waves. The arrival time and frequency characteristics of the guided waves can be used to image the velocity structure of the oceanic crust. The analysis and modeling based on guided wave observations provide a rare opportunity to understand the velocity structure of the oceanic crust and the variations in oceanic crustal materials during the subduction process.&lt;/p&gt;&lt;p&gt;High-frequency guided waves have been observed in the subduction zone of eastern Alaska. On several sections, observed seismograms recorded by seismic stations show low-frequency (&lt;2Hz) onsets ahead of the main high-frequency (&gt;2Hz) guided waves. Differences in the arrival times and dispersion characteristics of seismic phases are related to the velocity structure of the oceanic crust, and the characteristics of coda waves are related to the distribution of elongated scatters in the oceanic crust. Through fitting the observed broadband waveforms and synthetics modeled with the 2-D FDM (Finite Difference Method), we obtain the preferred oceanic crustal velocity models for several sections in the subduction zone of eastern Alaska. The preferred models can explain the seismic phase arrival times, dispersions, and coda characteristics in the observed waveforms. With the obtained P- and S- wave models of velocity structures on several sections, the material compositions they represent are deduced, and the variations of oceanic crustal materials during subducting can be understood. This provides new evidence for studying the details of the subduction process in the subduction zone of eastern Alaska.&lt;/p&gt;


1993 ◽  
Vol 119 (1-2) ◽  
pp. 71-83 ◽  
Author(s):  
Roger L. Larson ◽  
Andrew T. Fisher ◽  
Richard D. Jarrard ◽  
Keir Becker

Author(s):  
Li-Tao Ma ◽  
Li-Qun Dai ◽  
Yong-Fei Zheng ◽  
Zi-Fu Zhao ◽  
Wei Fang ◽  
...  

Abstract The role of subducting oceanic crust-derived fluids in generating mafic arc magmatism has been widely documented. However, the subducting oceanic crust is generally composed of basaltic igneous crust and seafloor sediment, which may give rise to different compositions of liquid phases causing metasomatism of the mantle wedge. Because of the similarity in enrichment of fluid-mobile incompatible elements in the two sources of subduction zone fluids, it has been a challenge to distinguish between them when studying the products of mafic arc magmatism. This difficulty is overcome by a combined study of whole-rock Li isotopes and zircon O isotopes in addition to whole-rock major-trace elements and Sr-Nd-Hf isotopes in Late Paleozoic mafic igneous rocks from southwestern Tianshan in western China. Zircon U-Pb dating yields consistent ages of 313±3 Ma to 305±1 Ma for magma crystallization. The mafic igneous rocks exhibit arc-like trace element distribution patterns and depleted whole-rock Nd-Hf isotopes but slightly high (87Sr/86Sr)i ratios of 0.7039 to 0.7056. They also show positive zircon εHf(t) values and slightly higher zircon δ18O values of 5.2-7.6‰. There are covariations of whole-rock Sr isotopes with Th/La and Rb/Nb ratios, indicating a contribution from terrigenous sediment-derived fluids to their mantle source in addition to basaltic igneous crust-derived fluids. Based on the slightly higher zircon δ18O values but variably lower whole-rock δ7Li values of -0.8 to 3.5‰ for the target rocks than those of mantle respectively, both altered oceanic basalt- and terrigenous sediment-derived fluids are identified in the mantle source of these mafic igneous rocks. Model calculations for trace elements and Sr-Nd-Li isotopes further confirm that the geochemical compositions of these mafic igneous rocks can be explained by chemical reaction of depleted MORB mantle peridotite with the mixed fluids to generate ultramafic metasomatites at subarc depths. Therefore, chemical metasomatism of the mantle wedge is a key mechanism for the incorporation of crustal components into the source of arc-like mafic igneous rocks above oceanic subduction zones.


2019 ◽  
Vol 218 (1) ◽  
pp. 190-199 ◽  
Author(s):  
Sunil K Roy ◽  
Nozomu Takeuchi ◽  
D Srinagesh ◽  
M Ravi Kumar ◽  
Hitoshi Kawakatsu

Sign in / Sign up

Export Citation Format

Share Document