scholarly journals Measuring gravity changes for decades

Author(s):  
Michel Van Camp ◽  
Olivier de Viron ◽  
Bruno Meurers ◽  
Olivier Francis

<p>Being sensitive to any phenomena associated with mass transfer, terrestrial gravimetry allows the monitoring of many phenomena at the 10<sup>-10</sup> g level (1 nm/s²) such as Earth tides, groundwater content, tectonic deformation, or volcanic activity. This sensitivity is richness, but also a source of problems because data interpretation requires separating the signatures from the different sources, including possible measurement artefacts associated with high precision. Separating the signal from a given source requires a thorough knowledge of both the instrument and the phenomena.</p><p>At the Membach geophysical laboratory, Belgium, the same superconducting gravimeter has monitored gravity continuously for more than 24 years. Together with 300 repeated absolute gravity measurements and environmental monitoring, this has allowed us to reach an unprecedented metrological knowledge of the instrument and of its sensitivity to hydrological and geophysical signals.</p><p>Separation is possible whenever the phenomena exhibit distinct time/frequency signatures, such as (pseudo)periodic phenomena or long-term processes, so that the signatures from other sources average out by stacking. For example, when performing repeated gravity measurements to evidence slow tectonic deformation, the easiest way to mitigate hydrological effects is to accumulate measurements for many years, at the same epoch of the year: the impact of seasonal variations is then minimized, and the interannual variations cancel out. Using 10 repeated absolute gravity campaigns at the same epoch of the year, we showed that the gravity rate of change uncertainty reaches on average 3–4 nm/s²/yr. Concurrently, using superconducting gravimeter time series longer than 10 years, we also investigated the time variations of tidal parameters.</p><p>It is also possible to separate phenomena by observing them by both gravity and some other techniques, with a different transfer function. By using 11 year-long times series from the gravimeter and soil moisture probes, and by stacking the observations, we measured directly the groundwater mass loss by evapotranspiration in the forest above the laboratory of Membach. Always with a precision better than 1 nm/s² (<=> 2.5 mm of water), we also monitored ground partial saturation dynamics and combining the gravity data with a weather radar allowed measuring convective precipitation at a scale of up to 1 km².</p><p>Extracting and interpreting those elusive signals could only by achieved throughout multi-instrumentation, multi-disciplinary collaborative studies, and 25 years of hard work.</p>

2020 ◽  
Vol 94 (9) ◽  
Author(s):  
Ezequiel D. Antokoletz ◽  
Hartmut Wziontek ◽  
Claudia N. Tocho ◽  
Reinhard Falk

AbstractThe Argentinean–German Geodetic Observatory (AGGO) is a fundamental geodetic observatory located close to the city of La Plata, Argentina. Two high-precision gravity meters are installed at AGGO: the superconducting gravimeter SG038, which is in operation since December 2015, and the absolute gravimeter FG5-227, which has provided absolute gravity measurements since January 2018. By co-location of gravity observations from both meters between January 2018 and March 2019, calibration factor and instrumental drift of the SG038 were determined. The calibration factor of the SG038 was estimated by different strategies: from tidal models, dedicated absolute gravity measurements over several days and a joint approach (including the determination of the instrumental drift) using all available absolute gravity data. The final calibration factor differs from the determination at the previous station, the transportable integrated geodetic observatory, in Concepcion, Chile, by only 0.7‰, which does not imply a significant change. From the combined approach also the mean absolute level of the SG was determined, allowing to predict absolute gravity values from the SG at any time based on a repeatability of $$12\,\hbox {nm}/\hbox {s}^{2}$$ 12 nm / s 2 for the FG5-227 at AGGO. Such a continuous gravity reference function provides the basis for a comparison site for absolute gravimeters in the frame of the international gravity reference frame for South America and the Caribbean. However, it requires the assessment of the total error budget of the FG5-227, including the link to the international comparisons, which will be subject of future efforts.


2021 ◽  
Vol 95 (2) ◽  
Author(s):  
Mirjam Bilker-Koivula ◽  
Jaakko Mäkinen ◽  
Hannu Ruotsalainen ◽  
Jyri Näränen ◽  
Timo Saari

AbstractPostglacial rebound in Fennoscandia causes striking trends in gravity measurements of the area. We present time series of absolute gravity data collected between 1976 and 2019 on 12 stations in Finland with different types of instruments. First, we determine the trends at each station and analyse the effect of the instrument types. We estimate, for example, an offset of 6.8 μgal for the JILAg-5 instrument with respect to the FG5-type instruments. Applying the offsets in the trend analysis strengthens the trends being in good agreement with the NKG2016LU_gdot model of gravity change. Trends of seven stations were found robust and were used to analyse the stabilization of the trends in time and to determine the relationship between gravity change rates and land uplift rates as measured with global navigation satellite systems (GNSS) as well as from the NKG2016LU_abs land uplift model. Trends calculated from combined and offset-corrected measurements of JILAg-5- and FG5-type instruments stabilized in 15 to 20 years and at some stations even faster. The trends of FG5-type instrument data alone stabilized generally within 10 years. The ratio between gravity change rates and vertical rates from different data sets yields values between − 0.206 ± 0.017 and − 0.227 ± 0.024 µGal/mm and axis intercept values between 0.248 ± 0.089 and 0.335 ± 0.136 µGal/yr. These values are larger than previous estimates for Fennoscandia.


2020 ◽  
Author(s):  
Georgios S. Vergos ◽  
Riccardo Barzaghi ◽  
Sylvaint Bovalot ◽  
Elmas Sinem Ince ◽  
Adrian Jäggi ◽  
...  

<p>Through its structure the International Gravity Field Service (IGFS) promotes the interaction, cooperation and synergy between the Gravity Services, namely the Bureau Gravimétrique International (BGI), the International Service for the Geoid (ISG), the International Geodynamics and Earth Tides Service (IGETS), the International Center for Global Earth Models (ICGEM), the International Combination Service for Time-variable Gravity Fields (COST-G) and the International Digital Elevation Model Service (IDEMS).</p><p>Furthermore, via its Central Bureau hosted at the Aristotle University of Thessaloniki (Greece), IGFS provides a link to the Global Geodetic Observing System (GGOS) Bureaus in order to communicate their requirements and recommendations to the IGFS-Centers. Moreover, IGFS provides a coordination host for the utilization of gravity-field related products and services towards their inclusion within a GGOS consistent frame meeting the necessary precision and accuracy requirements.</p><p>In this work, an outline is given on the recent activities of IGFS, namely those related to the contributions to the implementation of: the International Height Reference System/Frame; the Global Geodetic Reference System/Frame; the new Global Absolute Gravity Reference System/Frame and rhe combination of temporal monthly global gravity field models. Particularly, the impact that these activities have and will have in improving the estimation of the Earth’s gravity field, either at global and local scale, is highlighted also in the framework of GGOS.</p>


2020 ◽  
Author(s):  
Alessandro Bonforte ◽  
Filippo Greco ◽  
Daniele Carbone

<p>Here we present the results of repeated Absolute Gravity and GNSS measurements, collected at Mt. Etna (Italy) between 2009 and 2018. We aim at investigating the capabilities of this integrated approach for understanding the dynamics of magmatic sources over time-scales of months to years. The absolute gravity and GNSS campaign measurements were repeated roughly once a year; in order to improve the time resolution of gravity data, in some stations we performed, besides absolute gravity measurements, also relative measurements at intervals shorter than 1 year.</p><p>After being corrected for the effect of elevation changes, gravity data reveal an increase/decrease cycle, well spatio-temporal correlated with a general pattern of uplift/subsidence, during a period of intense lava fountains from the summit craters.</p><p>Our results provide insight into the processes that controlled the transfer of the magma from deeper to shallower levels of the plumbing system of Mt. Etna volcano, in periods preceding/accompanying the eruptive activity during 2009–2018.</p><p>Specifically, we propose that coupled changes in height-corrected gravity and elevation might be induced either by the magma storage/withdrawal below the volcanic pile, or by fluids pressurization/depressurization, or by a combination of both processes.</p><p>The application of the proposed approach could led to an improved capability to identify processes heralding eruptions.</p>


2015 ◽  
Vol 5 (1) ◽  
Author(s):  
L. Timmen ◽  
A. Engfeldt ◽  
H.-G. Scherneck

AbstractAnnual absolute gravity measurements with a FG5 instrument were performed in Onsala Space Observatory by the Institute of Geodesy of the Leibniz Universität Hannover from 2003 to 2011 and have been continued with the upgraded meter FG5X in 2014. Lantmäteriet, Gävle, with their FG5 absolute gravimeter have visited Onsala since 2007. Because small systematic errors may be inherent in each absolute gravimeter, their measuring level and a resulting bias (offset) between the instruments must be controlled over time by means of inter-comparison. From 2007 to 2014, 8 direct comparisons took place well distributed over the time span. A complete re-processing of the absolute gravity observations with the Hannover instrument has been conducted to improve the reduction of unwanted gravity effects. A new tidal model is based on continuous time series recorded with the GWR superconducting gravimeter at Onsala since 2009. The loading effect of the Kattegat is described with a varying sea bottom pressure (water and air mass load) and has been validated with the continuous gravity measurements. For the land uplift,which is a result of the still ongoing glacial isostatic adjustment in Fennoscandia, a secular gravity trend of −0.22 μGal/yr was obtained with a standard deviation of 0.17 μGal/yr. That indicates a slight uplift but is still not significantly different from zero.


2020 ◽  
Author(s):  
F. Greco ◽  
D. Carbone ◽  
F. Cannavò ◽  
A. A. Messina ◽  
G. Siligato

AbstractGravity changes associated with volcanic processes occur over a wide range of time scales, from minutes to years and with magnitudes between a few and a few hundred microGal. High-precision instruments are needed to detect such small signals and both time-lapse surveys along networks of stations, and continuous measurements at single points, are accomplished. Continuous volcano gravimetry is mostly carried out through relative gravimeters, either superconducting instruments, providing higher quality data, or the more widely used spring meters. On the other hand, time-lapse surveys can be carried out with relative (spring) gravimeters, that measure gravity differences between pairs of stations, or by absolute gravimeters, capable of measuring the absolute value of the gravitational acceleration at the observation point. Here we present the state-of-the-art of terrestrial gravity measurements to monitor and study active volcanoes and the possibilities of new gravimeters that are under development. In particular, we present data from a mini array of three iGrav superconducting gravimeters (SGs) at Mount Etna (the first network of SGs ever installed on an active volcano). A comparison between continuous gravity measurements recorded through the iGrav#016 superconducting gravimeter at Serra La Nave station (1730 m a.s.l.) and absolute gravity data collected with the Microg LaCoste FG5#238 gravimeter in the framework of repeated campaigns is also presented. Furthermore, we introduce the Horizon 2020 NEWTON-g project (New Tools for Terrain Gravimetry), funded under the FET-OPEN Research and Innovation Actions call, Work Programme 2016–2017 (Grant Agreement No 801221). In the framework of this project, we aim to develop a field-compatible gravity imager, including an array of low-costs Micro-Electro-Mechanical Systems (MEMS)-based relative gravimeters, anchored on an absolute quantum gravimeter. After the design and production phases, the gravity imager will be field-tested at Mt. Etna (Italy) during the last 2 years of the project.


2021 ◽  
Author(s):  
Victoria Anne Smith ◽  
Graham Appleby ◽  
Marek Ziebart ◽  
Jose Rodriguez

AbstractAbsolute gravity measurements taken on a near-weekly basis at a single location is a rarity. Twelve years of data at the UK’s Space Geodesy Facility (SGF) provides evidence to show that the application of results from international comparisons of absolute gravimeters should be applied to data and are critical to the interpretation of theSGF gravity time series of data from 2007 to 2019. Though residual biases in the data are seen. The SGF time series comprises near weekly data, with exceptions for manufacturer services and participation in international instrument comparisons. Each data set comprises hourly data taken over 1 day, with between 100 and 200 drops per hour. Environmental modelling indicates that the annual groundwater variation at SGFof some 2 m influences the gravity data by 3.1 μGal, based upon some measured and estimated soil parameters. The soil parameters were also used in the calculation of the effect of an additional telescope dome, built above the gravity laboratory, and have been shown to be realistic. Sited in close proximity to the long-established satellite laser ranging (SLR) system and the global navigation satellite systems (GNSS) the absolute gravimetry (AG) measurements provide a complimentary geodetic technique, which is non space-based. The SLR-derived height time series provides an independent measurement of vertical motion at the site which may be used to assess the AG results, which are impacted by ground motion as well as mass changes above and below the instruments.


2021 ◽  
Author(s):  
Filippo Greco ◽  
Daniele Carbone ◽  
Alfio Alex Messina ◽  
Danilo Contrafatto

<p>Since September 2014, iGrav#016 superconducting gravimeter (SG; by GWR) has recorded continuously at the Serra La Nave Astrophysical Observatory (SLN; 1730 m elevation; ~6.5 km from the Etna’s summit craters; Italy).</p><p>Here we present results of a comparison between a six-year (2015-2020) time series from iGrav#16 and absolute gravity data collected through the Microg LaCoste FG5#238 absolute gravimeter (AG), in the framework of repeated measurements that were performed at the same installation site of the SG. Both AG and SG records have been corrected for the local tides, local atmospheric pressure and for the polar motion effect.</p><p>The comparison allows to estimate the long-term drift of the SG, defined as the total SG trend minus the observed trend in AG measurements, which is of the order of 9 microGal/year. Once the drift effect is removed,  there is a remarkably good fit between the two data sets. The differences between absolute gravity changes and corresponding relative data in the continuous time series from the SG are within 1-2 microGal (the total error on AG measurements at this station is typically +/- 3 microGal).</p><p>After being corrected for the effect of instrumental drift, the time series from the SG reveals gravity changes that are due to hydrological and volcanological effects.</p><p>Our study shows how the combination of repeated AG measurements and continuous gravity observations through SGs can be used to obtain a fuller and more accurate picture of the temporal characteristics of the studied processes.</p>


Sign in / Sign up

Export Citation Format

Share Document