Analysis of the Status of Research and Innovation Actions on Electrofuels under Horizon 2020

Europe stated the ambitious target of becoming carbon neutral by 2050 to combat climate change and meet the requirements imposed by the Paris Agreement, and renewable energy has proved to be a promising solution for the decarbonization of many sectors. Nonetheless, their aleatory nature leads to grid unbalances due to the difference between supply and demand. Storage solutions are needed, and electrofuels become a key factor in this context: they are fuels produced from electricity, which leads to carbon-neutral fuels if it originates from renewable sources. These can constitute a key solution to store the surplus energy and to decarbonize the so-called hard-to-abate sectors. Electrofuel production technologies have not yet been fully developed, and, in this context, extensive study of the state-of-the-art of existing projects can be very useful for researchers and developers. This work researches the European projects funded by the Horizon 2020 Programme regarding electrofuel production. The projects were analyzed in-depth using specific features, and the results were presented.

A Review on Connecting Research, Policies and Networking in the Area of Climate-Related Extreme Events in the EU with Highlights of French Case Studies

The increasing severity and frequency of extreme weather and climate events (e.g., floods, heat and cold waves, storms, forest fires) resulting from climate change-compounded vulnerabilities and exposure require a specific research focus. Climate-related extreme events are part of disaster risk reduction policies ruled at international, EU, and national levels, covering various sectors and features such as awareness-raising, prevention, mitigation, preparedness, monitoring and detection, response, and recovery. A wide range of research and technological developments, as well as capacity-building and training projects, has supported the development and implementation of these policies and strategies. In particular, research and innovation actions support the paradigm shift from managing “disasters” to managing “risks” and enhancing resilience needs. In this respect, a huge body of knowledge and technology has been developed in the EU-funded Seventh Framework Programme (2007–2013) and Horizon 2020 (2014–2020), for example in the area of measures and technologies needed to enhance the response capacity to extreme weather and climate events affecting the security of people and assets. In addition, networking initiatives have been developed to connect scientists, policy-makers, practitioners, and industry and civil society representatives in order to boost research uptake, identify gaps, and elaborate research programs at EU level. Research and networking efforts are pursued within the newly starting framework program Horizon Europe (2021–2027), with a focus on supporting civil protection operations. This paper provides a general overview of relevant EU policies and examples of past and developing research in the area of weather and climate extreme events and highlights current networking efforts in this area.

Systematic Mapping of Long-Term Urban Challenges

This paper investigates on long-term challenges faced by local governments. Using empirical evidence from Estonia, this paper aims to help fill a research gap in that there is a lack of a systematic approach on how to analyze common urban challenges via direct involvement of local governments. In terms of conceptual framework, a unique combination of public value theory and mission-oriented innovation is proposed. The data is collected via questionnaire, interviews and workshops involving up to 35 local governments. It is important that instead of current problems relating only to one city, this study focuses on finding shared, long-term challenges and, from them, generates a list of top 10 challenges. This provides valuable input to initiating new research and innovation projects in the key, smart city domains (e.g., energy, mobility, built environment, governance and data).

Reflections on the Innovation of University Scientific Research Management in the Era of Big Data

In China, universities are important centers for SR (scientific research) and innovation, and the quality of SR management has a significant impact on university innovation. The informatization of SR management is a critical component of university development in the big data environment. As a result, it is crucial to figure out how to improve SR management. As a result, this paper builds a four-tier B/W/D/C (Browser/Web/Database/Client) university SR management innovation information system based on big data technology and thoroughly examines the system’s hardware and software configuration. The SVM-WNB (Support Vector Machine-Weighted NB) classification algorithm is proposed, and the improved algorithm runs in parallel on the Hadoop cloud computing platform, allowing the algorithm to process large amounts of data efficiently. The optimization strategy proposed in this paper can effectively optimize the execution of scientific big data applications according to a large number of simulation experiments and real-world multidata center environment experiments.

White paper on Promoting Domestic Manufacturing of Medical Devices

India’s medical device market is the fourth largest in India and one of the top 20 worldwide; however import dependence to the tunes of about 80 percent of overall sales is an impediment to achieve self-reliance vis-a-vis domestic manufacturing of medical devices and equipments. This high reliance on imports presents a grand opportunity to domestic manufacturers. An enabled ecosystem that promotes indigenous manufacturing of medical devices is crucial for the growth of the health care sector. The current white paper analyses various scenarios for manufacturing capability of different medical technologies and probable recommendations to augment and strengthen production within each scenario.The four scenarios described in the paper includes (1) those medical devices for which there is a high domestic demand that is fulfilled through imports even if domestic manufacturing capacity exists, implying low production in the country (2) relatively low-end technology medical devices for which there is domestic demand with high reliance on imports (3) high-end technology devices which are imported to satisfy domestic need and for which there is no domestic manufacturing capacity (4) medical devices which are being exported to rest of the World. The paper recommends for a comprehensive regulatory overhauls, review of existing taxation structure, calibrated customs duty, fixed term capital subsidy, extended coverage of PLI scheme, strengthening the research and innovation ecosystem, emphasis on technology transfer and building brand India as some of the measures that can potentially favour promotion of domestic manufacturing of medical devices and allow the India Med-Tech sector to grow into global champions.

Healthcare workers' views on mandatory SARS-CoV-2 vaccination in the United Kingdom: findings from the UK-REACH prospective longitudinal cohort study

Background Several countries now have mandatory SARS-CoV-2/COVID-19 vaccination for healthcare workers (HCWs) or the general population. HCWs' views on this are largely unknown. Methods We administered an online questionnaire to 17891 United Kingdom (UK) HCWs in Spring 2021 as part of the United Kingdom Research study into Ethnicity And COVID-19 outcomes in Healthcare workers (UK-REACH) nationwide prospective cohort study. We categorised responses to a free-text question 'What should society do if people don't get vaccinated against COVID-19?' using content analysis. We collapsed categories into a binary variable: favours mandatory vaccination or not and used logistic regression to calculate its demographic predictors, and occupational, health and attitudinal predictors adjusted for demographics. Findings Of 5633 questionnaire respondents, 3235 answered the freetext question; 18% (n=578) of those favoured mandatory vaccination but the most frequent suggestion was education (32%, n=1047). Older HCWs, HCWs vaccinated against influenza (OR 1.48; 95%CI 1.10-1.99, vs none) and with more positive vaccination attitudes generally (OR 1.10; 95%CI 1.06-1.14) were more likely to favour mandatory vaccination (OR 1.26; 95%CI 1.17-1.37, per decade increase), whereas female HCWs (OR= 0.80, 95%CI 0.65-0.99, vs male), Black HCWs (OR= 0.48, 95%CI 0.26-0.87, vs White), those hesitant about COVID-19 vaccination (OR= 0.56; 95%CI 0.43-0.71, vs not hesitant), in an Allied Health Profession (OR 0.67; 95%CI 0.51-0.88, vs Medical), or who trusted their organisation (OR 0.78; 95%CI 0.63-0.96) were less likely to. Interpretation Only one in six of the HCWs in this large, diverse, UK-wide sample favoured mandatory vaccination. Building trust, educating and supporting HCWs who are hesitant about vaccination may be more acceptable, effective and equitable. Funding MRC-UK Research and Innovation grant (MR/V027549/1) and the Department of Health and Social Care via the National Institute for Health Research.

Self-Perceived Skills of Pre Intern Doctors in Sri Lanka

IntroductionThe transition from medical student to intern is a significant and challenging time in a doctor’s training. It can be stressful for the young doctor and there can be varying expectations from employers and supervisors on their capabilities. There is a time gap between graduation and internship for medical graduates in Sri Lanka. Also, there was no proper orientation prior the internship. Thus, the Good Intern Programme was developed as a skills training programme for pre interns who are awaiting internship, and this was conducted in collaboration with Ministry of Health (MOH), Government Medical Officers’ Association (GMOA), Society for Health Research and Innovation (SHRI). This study aimed to explore self-perceived competency of selected skills of pre-interns who were awaiting for internship. Methods Study populationSri Lankan medical Faculties (University of Colombo, Peradeniya, Sri Jayewardenapura, Jaffna, Kelaniya, Ruhuna, Eastern University- Batticaloa, Rajarata University and General Sir John Kotelawala Defence University -KDU), and foreign universities produce approximately 1000 medical graduates per year. In 2020, all pre- interns who joined the Good Intern Programme, Sri Lanka were invited to participate in this questionnaire survey. Statistical analyses were performed using SPSS 23.0 software. Descriptive data were presented as proportions.Results Mean age was 27.6 (+ SD 1.4). Majority of the pre-interns were females (66.5%). Majority of pre-interns perceived that they were able to performs suturing, cannulation, catheterization, setting up an Intravenous (IV) drip, infusion pump setup, blood and blood products transfusion, venipuncture, venipuncture for blood culture, injections-Subcutaneous (SC)/Intramuscular (IM), Glasgow Coma Scale (GCS) monitoring, Cardiopulmonary resuscitation (CPR), arterial puncture for Arterial Blood Gases (ABG), wound dressing, suture removal, bandaging, glucometer use, nebulization, connecting to an ECG (electrocardiogram) monitor competently with or without supervision respectively. Lack of competency perceived on the following skills. Nasogastric tube (NG) insertion, pleural tap, peritoneal tap, removal of an Intercostal tube, lumbar puncture, defibrillation, venous cut down, intubation, CVP (central venous catheter) line insertion, Intercostal (IC) tube insertion were rated by the majority of pre-interns as skills that could be performed competently with supervision or not able to perform the skill but has observed skill. ConclusionAlthough most of the skills were rated by majority of the pre-interns as skills that could be competently performed with or without supervision respectively, there were some skills which needed some improvement. This study suggests that Good Intern Programme in pre-intern period can help to prepare students for the intern role.

A Systems Approach to Achieve Equity in Healthcare Research

Healthcare in the United States is inequitable. The consequence of inequity is that the burden of serious chronic disease, such as diabetes, falls disproportionately on populations experiencing health disparities, predominantly Black, Indigenous, and people of color. [1] The reasons for the inequity include the negative impact of the social determinants of health of individuals and families from these communities, being underrepresented as participants in clinical research, having limited access to technologies that support self-care, and a lack of researchers and clinicians from these same populations. [2] To achieve equity and fairness, there is a need for a paradigm shift in healthcare research and innovation based on improving access, trust, and self-efficacy [3] to convert new knowledge into positive health outcomes.

Advancing Smart Manufacturing in Europe: Experiences from Two Decades of Research and Innovation Projects

In the past two decades, a large amount of attention has been devoted to the introduction of smart manufacturing concepts and technologies into industrial practice. In Europe, these efforts have been supported by European research and innovation programs, bringing together research and application parties. In this paper, we provide an overview of a series of four content-wise connected projects on the European scale that are aimed at advancing smart manufacturing, with a focus on connecting processes on smart factory shop floors to manufacturing equipment on the one hand and enterprise-level business processes on the other hand. These projects cover several tens of application cases across Europe. We present our experiences in the form of a single, informal longitudinal case study, highlighting both the major advances and the current limitations of developments. To organize these experiences, we place them in the context of the well-known RAMI4.0 reference framework for Industry 4.0 (covering the ISA-95 standard). Then, we analyze the experiences, both the positive ones and those including problems, and draw our learnings from these. In doing so, we do not present novel technological developments in this paper—these are presented in the papers we refer to—but concentrate on the main issues we have observed to guide future developments in research efforts and industrial innovation in the smart industry domain.